Tens of crawling bio-robots with cockroaches as the mobile platform have been developed with various functions. Compared with artificial crawling robots of the same size, they revealed better flexibility, larger payload, and stronger endurance. These features made bio-robots ideal for pipeline inspection scenarios because the advancements in locomotion mechanisms and efficient power systems are still hurdles for current artificial systems. In this study, we controlled the bio-robot to crawl in the confined dark pipeline and achieved autonomous motion control with the help of an onboard sensing system. Specifically, a micro-camera was mounted on the electronic backpack of the cockroach for image collection, and an IMU sensor was used to compute its body orientation. The electronic backpack transmitted images to the host computer for junction recognition and distance estimation. Meanwhile, the insect's habituation to electrical stimulation has long been an uncertain factor in the control of bio-robots. Here, a synergistic stimulation strategy was proposed to markedly reduce the habituation and increase the number of effective turning controls to over 100 times. It is also found that both the increase of payload and the application of stimulations could promote the metabolic rate by monitoring carbon dioxide release. With the integration of synergistic stimulation and autonomous control, we demonstrated the fully autonomous pipeline navigation with our cockroach bio-robot, which realized the cycle number of approximately 10 in a roll. This research provides a novel technology that has the potential for practical applications in the future.
Jumping is beneficial for microrobots because they have to face obstacles larger than their height frequently. However, compacting a jumping mechanism into the small body of a microrobot is exceptionally challenging. Instead of assembling a bio-inspired microrobot, the insect itself can be transformed into a jumping robot. Herein, we demonstrated the first-ever biohybrid jumping robot that retained the natural jumping ability of a locust. The fast kicking of the locust's hindleg was mainly induced by two muscles, flexor muscle, and extensor muscle. The elaborate structure and accurate collaboration of the muscles are critical for leg kicking, contributing to the co-contraction process. In this article, we investigated the sequences of muscular activities and demonstrated the co-contraction control exogenously. The kicking control of the hindleg relies on the accurately overlapped stimulation and the independently modulated waveform. With the help of a tiny wireless stimulator, the cyborg locust was remotely controlled to jump an average of 10.4 cm high and 42.6 cm far. Moreover, the cyborg locust retained its internal body righting mechanism, which means the robot can quickly recover its posture for consecutive jumping. This work is a foundational step towards a fully controllable biohybrid jumping robot.
Embedded bioprinting overcomes the barriers associated with the conventional extrusion‐based bioprinting process as it enables the direct deposition of bioinks in 3D inside a support bath by providing in situ self‐support for deposited bioinks during bioprinting to prevent their collapse and deformation. Embedded bioprinting improves the shape quality of bioprinted constructs made up of soft materials and low‐viscosity bioinks, leading to a promising strategy for better anatomical mimicry of tissues or organs. Herein, the interplay mechanism among the printing process parameters toward improved shape quality is critically reviewed. The impact of material properties of the support bath and bioink, printing conditions, cross–linking mechanisms, and post‐printing treatment methods, on the printing fidelity, stability, and resolution of the structures is meticulously dissected and thoroughly discussed. Further, the potential scope and applications of this technology in the fields of bioprinting and regenerative medicine are presented. Finally, outstanding challenges and opportunities of embedded bioprinting as well as its promise for fabricating functional solid organs in the future are discussed.
Unlike biomimetic methods, the insect–computer hybrid is an alternative approach to developing insect-scale robots. Insect–computer hybrid is a technique that transforms a living insect into a controllable robot by embedding it with artificial devices. In this article, a beetle ( Mecynorrhina torquata ) was transformed into a hybrid flying system by mounting an electronic backpack and implanting electrodes on it. Wing trajectories during fictive flight climbing and flight diving were captured to investigate the natural flight-height control of beetles. Compare with the electrically induced wing trajectories via basalar, subalar, and third axillary (3Ax) muscle stimulations, we hypothesized that the basalar muscles are involved in ascending flight, whereas the 3Ax muscles function to reduce the flight-height. By reproducing the electrical stimulations on bilateral muscle pairs during free flights, we found that stimulations of the basalar muscle pair increased vertical accelerations. In contrast, the 3Ax muscle pair's stimulation decreased vertical accelerations gradually as a function of the electrical stimulation frequency. Accordingly, a proportional-derivative feedback controller was proposed to maintain the beetles' flight-height using frequency-dependent electrical pulses on the basalar and 3Ax muscles. In this article, the altitude control of a free-flying beetle was demonstrated for the first time.
Jumping locomotion is critical for microrobots to overcome obstacles. Among the microjumping robots, the development of an omnidirectional jumping mechanism is challenging. To avoid the complicated microfabrication process, we present an insect-computer hybrid robot by controlling the locomotions of an Oriental Migratory Locust ( Locusta migratoria manilensis, Meyen 1835 ). The insect-computer hybrid robot achieves repetitive omnidirectional jumps of ∼100 mm high. A series of experiments on jumping control, turning control, and collaborative directional jumping control are carried out. We also demonstrate the implementation of a wireless stimulator backpack that provides remote locomotion control, which transforms the insect into a hybrid robot. Moreover, a feedback jump control system is subsequently presented. The results indicate that the hybrid robot could easily achieve an omnidirectional jump and maintain body righting after landing. This robot is well-suited for applications that require locomotion on uneven terrains, such as environmental surveillance and search and rescue.
Insect‐scale mobile robots can execute diverse arrays of tasks in confined spaces. Although most self‐contained crawling robots integrate multiple actuators to ensure high flexibility, the intricate actuators restrict their miniaturization. Conversely, robots with a single actuator lack the requisite agility and precision for planar movements. Herein, a novel eccentric rotation‐dependent multidirectional transmission is presented using a tilted eccentric motor and a simplistic two‐legged structural configuration for planar locomotion. The speed of the eccentric motor is modulated to enable alternating microscopic jumps to propel the system, creating a mode of motion analogous to galumphing of seals. Upon modeling the motion dynamics and conducting experiments, the effectiveness of direct motion transmission is substantiated through microscopic galumphing encompassing left/right crawling and straight‐forward crawling. Finally, a 1.2 g untethered robot is developed, which demonstrates enhanced straight crawling and spot turning, traverses narrow tunnels, and achieves precise movements. Therefore, the proposed motion‐transmission technique provides a comprehensive set of innovative solutions of underactuated agile robots.