An optical fiber liquid-level sensor based on an extrinsic Fabry–Perot (FP) cavity is proposed and demonstrated. The FP cavity consists of the end of the single-mode optical fiber and the elastic silicon layer. Liquid pressures act on the mechanical construction to change the cavity length, resulting in differential phase shifts that may be observed as variations of the output signal intensity. Self-compensated steps have been taken to obtain high accuracy and long-term stability in realistic circumstances. Experimental results indicate that accuracy of over a full scale of (water) is obtained under ambient temperature . The sensor can be used to measure liquid levels continuously and accurately in explosive and flammable environments.
Concentric rings are observed on the front surface when a laser pulse focuses on the rear surface of fused silica. The spatial distribution of concentric rings presents a certain regularity, and the width and depth of the ring gradually increase from inside to outside. These features of the concentric rings are affected by the laser wavelength and energy. Their formation mechanism is explored by means of combining a time-resolved pump-probe shadowgraph and surface damage morphology. Concentric rings are formed during the irradiation process of one nanosecond pulses, whose radius and depth characteristics may record the relationship between the early stage of laser-induced damage structure and the evolution of early plasma.
In this study, we use a time-resolved pump-probe shadowgraph technique to investigate the evolution characteristics of filamentary damage in bulk fused silica induced by a nanosecond pulse at 532 nm. The pump laser focuses on the front surface of sample and filamentary damage appears independently in the middle of sample. The whole damage process can be divided into single filament (SF), double filaments (DFs), and long filament (LF) successively. At the same time, the improved moving focus model is proposed by taking into account the temporal shape of the laser pulse and the laser is blocked and reflected by plasma at the critical density. It is in good agreement with the experimental result of filamentary damage process and helps to explore the mechanism of laser-induced filamentary damage in nanosecond regime.