In this work, hierarchically porous honeycomb-like carbon (HCC) was prepared and used in the fabrication of the air electrode for lithium–oxygen batteries. The HCC-based electrode was found to yield an obviously higher specific capacity of 3233 mA h g−1 without the addition of catalysts and an improved cycle efficiency with a higher discharge voltage plateau (2.75 V vs. 2.50 V) than conventional carbon. The enhanced performance is largely ascribed to its unique porous structure, which consists of large tunnels for oxygen diffusion into the inner electrode and nanosized pores, which serve as reactive sites for oxygen reduction reactions and provide more room for accumulation of deposits. Furthermore, HCC samples with different pore sizes of 400 and 100 nm were investigated in lithium–oxygen batteries. There is a significant relationship between the discharge performance and the diameter.
24 January 2014 in Journal of Materials Chemistry A
In this study, phenyl sulfonated graphene/sulfur (PhSO3-RG/S) composites were synthesized for the first time via an in situ redox reaction in aqueous solution. These composites were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and thermogravimetry (TG). The results show that sulfur was thoroughly enveloped by functionalized water-soluble phenyl sulfonated graphene, providing a conductive coating for electron transport and functional groups that interact strongly with polysulfides or sulfur to improve trapping. In our study, we found that large amounts of conductive carbon additives and binders were not required when the electrodes were prepared on carbon-coated aluminum foil substrates because phenyl sulfonated graphene has excellent electrical conductivity, and contains functional groups that interact strongly with carbon and sulfur. The electrochemical tests show that the binder-free PhSO3-RG/S electrodes have high reversible capacity, good cycling stability at the current density of 0.2 C, and excellent rate capability.
12 February 2022 in Journal of Materials Chemistry A
Nano-TiO2 coated single-crystal LiNi0.65Co0.15Mn0.2O2 for lithium-ion batteries with a stable structure and excellent cycling performance at a high cut-off voltage.
Focus on lithium–oxygen batteries is growing due to their various advantages, such as their high theoretical energy densities and renewable and environmentally friendly characteristics. Nonaqueous organic electrolytes play a key role in lithium–oxygen batteries, allowing the conduction of lithium ions and oxygen transfer in the three phase boundaries (cathode–gas–electrolyte). Herein, we report the effect of lithium salt concentrations in single-solvent lithium–oxygen battery systems systematically (using bis(trifluoromethanesulfonyl)imide (LiTFSI) in tetraethylene glycol dimethyl ether (TEGDME)) on their electrochemical performances. The first discharge capacities and cyclabilities exhibit favorable correlations with the lithium salt concentration, of which using 0.4 and 1.5 M LiTFSI show the best discharge capacities and cyclabilities. The specific capacity of the 0.4 M LiTFSI system reaches 7000 mAh g–1, about 1.3 times that of the commonly used 1 M LiTFSI in TEGDME. Cyclic voltammetry with slow scan speeds further investigates the system stability and reaction mechanism. The surface morphology after the discharge and interface impedance after charging, which are examined using scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS), have significant effects on the comprehensive performances. Conductivity and viscosity play mutual roles in the lithium–oxygen battery performance, while the oxygen solvation has little effect.
19 September 2014 in ACS Sustainable Chemistry & Engineering
Hierarchical hollow nano/micro structure has received wide attention in new-generation, high-performance lithium-ion battery applications. Here, novel hierarchical hollow Fe2O3 micro-flowers composed of porous nanosheets are prepared by controlled thermal decomposition of the iron alkoxide precursor. On the basis of morphology investigations in time-dependent experiments, the possible two-stage growth mechanism of the hollow flower-like iron alkoxide is proposed. When used as anode materials for lithium-ion batteries, the hollow Fe2O3 micro-flowers exhibit superior cycling performance (960 mA h g−1 at 100 mA g−1 up to 250 cycles) and rate capability (reversible charging capacity of 750 mA h g−1 at 500 mA g−1 after 500 cycles and 518 mA h g−1 at 1000 mA g−1 after 670 cycles) thanks to their hollow interiors and the porous nanosheet subunits. This research suggests that the hollow Fe2O3 micro-flowers could be suitable as a high rate performance anode material for lithium-ion batteries.