The sphere target played a vital role in terrestrial LiDAR applications, and solving its geometrical center based on point cloud was a widely concerned problem. In this study, we proposed a newly finite random search algorithm for sphere target fitting. Based on the point cloud data and the geometric characteristics of the sphere target, the algorithm realized the target sphere fitting from the perspective of probability and statistics with the help of parameter estimation. Firstly, an initial constraint space was constructed, and the initial center and radius were determined by finite random search. Then, the optimal spherical center and radius were determined gradually through continuous iterative optimization. We tested the algorithm with the simulated and realistic point cloud. Experimental results showed that the proposed algorithm could be effectively applied to all kinds of point cloud fitting. When the coverage rate was bigger than 30%, the fitting accuracy could reach within 0.01 mm for all kinds of point clouds. When the coverage rate was less than 20%, the fitting accuracy can reach ±1 mm, although it was reduced to a certain extent.
It is of great convenience to map daily evapotranspiration (ET) by remote sensing for agricultural water management without computing each surface energy component. This study used the operational simplified surface energy balance (SSEBop) and the remote sensing-based Penman–Monteith and Priestly–Taylor (RSPMPT) models to compute continuous daily ET over irrigated fields with the MODIS and CMADS data. The estimations were validated with eddy covariance (EC) measurements. Overall, the performance of RSPMPT with locally calibrated parameters was slightly better than that of SSEBop, with higher NSE (0.84 vs. 0.78) and R2 (0.86 vs. 0.81), lower RMSE (0.78 mm·d−1 vs. 0.90 mm·d−1), although it had higher bias (0.03 mm·d−1 vs. 0.01 mm·d−1) and PBias (1.41% vs. 0.59%). Due to the consideration of land surface temperature, the SSEBop was more sensitive to ET’s change caused by irrigation before sowing in March and had a lower PBias (6.7% vs. 39.8%) than RSPMPT. On cloudy days, the SSEBop is more likely to overestimate ET than the RSPMPT. To conclude, driven by MODIS and CMADS data, the two simple models can be easily applied to map daily ET over cropland. The SSEBop is more practical in the absence of measured data to optimize the RSPMPT model parameters.
2 December 2022 in IEEE Transactions on Geoscience and Remote Sensing
Spherical target fitting (STF) is a challenging problem in terrestrial 3D laser scanning applications, and many algorithms have been developed for this task. This paper aims to address the issues, including how to find the proper algorithm for the specific requirements from the existing algorithms, what influencing factors should be considered when utilizing those algorithms, and how to improve them further, etc. We classify the existing STF algorithms into least squares (LS) and numerical optimization (NO) categories and select seven representative algorithms as major research objectives. Based on the dissection of their fundamental principles, we comprehensively verify the selected seven algorithms using simulated and field data, respectively. The experimental findings reveal that the linear least squares (LLS), orthogonal non-linear least squares (ONLS), and gradient descent (GD) have high computational efficiency; however, they are sensitive to noise and coverage. General total least squares (GTLS) has a certain degree of noise immunity but suffers from low efficiency and the constructed stochastic model. By introducing specific constraint rules, M-estimate sample consensus (MSAC) and feature-constrained random search (FCRS) may provide higher-precision fitting results, but indicate obvious instability and unreliability. Feature-constrained grid search (FCGS) can achieve good results in most cases in the usage of feature constraints and uniform sampling, but still presents drawbacks under the severely ill-conditioned situation. Additionally, comprehensive analysis indicates that the accuracy and robustness of the STF algorithms are influenced by noise and coverage, whereas computational efficiency is primarily affected by the number of measurement points.