The seamless integration of III-V nanostructures on silicon is a long-standing goal and an important step towards integrated optical links. In the present work, we demonstrate scaled and waveguide coupled III-V photodiodes monolithically integrated on Si, implemented as InP/In0.5Ga0.5As/InP p-i-n heterostructures. The waveguide coupled devices show a dark current down to 0.048 A/cm2at −1 V and a responsivity up to 0.2 A/W at −2 V. Using grating couplers centered around 1320 nm, we demonstrate high-speed detection with a cutoff frequency f3dBexceeding 70 GHz and data reception at 50 GBd with OOK and 4PAM. When operated in forward bias as a light emitting diode, the devices emit light centered at 1550 nm. Furthermore, we also investigate the self-heating of the devices using scanning thermal microscopy and find a temperature increase of only ~15 K during the device operation as emitter, in accordance with thermal simulation results.
31 March 2021 in IEEE Transactions on Electron Devices
III-V materials, such as InGaAs and InP, are highly attractive for high-performance electronics and optoelectronics owning to their high carrier mobilities and potential for bandgap engineering. Integration on silicon substrates, however, is a key requirement to enable widespread adoption of these materials. In this work, direct wafer bonding (DWB) of III-V materials is explored as a low-temperature enabling technology for Si integration. For high-performance logic and RF electronics, DWB is compared to competing integration technologies and is shown to exhibit higher device performance due to its relatively low process complexity and thermal impact (~300 °C). Due to the low thermal impact of DWB, it is also uniquely suitable for 3-D integration, i.e., vertical stacking of multiple functional layers. III-V optoelectronics are attractive in such 3-D stacks, where they can enable high-efficiency tunable lasers together with Si photonics integrated circuits. DWB is here compared to selective epitaxy as an integration route for InP-on-Si microdisk lasers. Plasmonics are explored as well, allowing scaling of integrated III-V photonic devices beyond the diffraction limit of light. The results of this work show that DWB is a highly promising integration route for III-V materials for both electronics and optoelectronics applications.
A key component for optical on-chip communication is an efficient light source. However, to enable low energy per bit communication and local integration with Si CMOS, devices need to be further scaled down. In this work, we fabricate micro- and nanolasers of different shapes in InP by direct wafer bonding on Si. Metal-clad cavities have been proposed as means to scale dimensions beyond the diffraction limit of light by exploiting hybrid photonic-plasmonic modes. Here, we explore the size scalability of whispering-gallery mode light sources by cladding the sidewalls of the device with Au. We demonstrate room temperature lasing upon optical excitation for Au-clad devices with InP diameters down to 300 nm, while the purely photonic counterparts show lasing only down to 500 nm. Numerical thermal simulations support the experimental findings and confirm an improved heat-sinking capability of the Au-clad devices, suggesting a reduction in device temperature of 450 - 500 K for the metal-clad InP nanodisk laser, compared to the one without Au. This would provide substantial performance benefits even in the absence of a plasmonic mode. These results give an insight into the benefits of metal-clad designs to downscale integrated lasers on Si.
It is a long-standing goal to leverage silicon photonics through the combination of a low-cost advanced silicon platform with III-V-based active gain material. The monolithic integration of the III-V material is ultimately desirable for scalable integrated circuits but inherently challenging due to the large lattice and thermal mismatch with Si. Here, we briefly review different approaches to monolithic III-V integration while focusing on discussing the results achieved using an integration technique called template-assisted selective epitaxy (TASE), which provides some unique opportunities compared to existing state-of-the-art approaches. This method relies on the selective replacement of a prepatterned silicon structure with III-V material and thereby achieves the self-aligned in-plane monolithic integration of III-Vs on silicon. In our group, we have realized several embodiments of TASE for different applications; here, we will focus specifically on in-plane integrated photonic structures due to the ease with which these can be coupled to SOI waveguides and the inherent in-plane doping orientation, which is beneficial to waveguide-coupled architectures. In particular, we will discuss light emitters based on hybrid III-V/Si photonic crystal structures and high-speed InGaAs detectors, both covering the entire telecom wavelength spectral range. This opens a new path towards the realization of fully integrated, densely packed, and scalable photonic integrated circuits.
There is a general trend of downscaling laser cavities, but with high integration and energy densities of nanocavity lasers, significant thermal issues affect their operation. The complexity of geometrical parameters and the various materials involved hinder the extraction of clear design guidelines and operation strategies. Here, we present a systematic thermal analysis of InP-on-Si micro- and nanocavity lasers based on steady-state and transient thermal simulations and experimental analysis. In particular, we investigate the use of metal cavities for improving the thermal properties of InP-on-Si micro- and nanocavity lasers. Heating of lasers is studied by using Raman thermometry and the results agree well with simulation results, both revealing a temperature reduction of hundreds of kelvins for the metal-clad cavity. Transient simulations are carried out to improve our understanding of the dynamic temperature variation under pulsed and continuous wave pumping conditions. The results show that the presence of a metal cladding not only increases the overall efficiency in heat dissipation but also causes a much faster temperature response. Together with optical experimental results under pulsed pumping, we conclude that a pulse width of 10 ns and a repetition rate of 100 kHz is the optimal pumping condition for a 2 μm wide square cavity.
An important building block for on-chip photonic applications is a scaled emitter. Whispering gallery mode cavities based on III–Vs on Si allow for small device footprints and lasing with low thresholds. However, multimodal emission and wavelength stability over a wider range of temperature can be challenging. Here, we explore the use of Au nanorod antennae on InP whispering gallery mode lasers on Si for single-mode emission. We show that by proper choice of the antenna size and positioning, we can suppress the side modes of a cavity and achieve single-mode emission over a wide excitation range. We establish emission trends by varying the size of the antenna and show that the far-field radiation pattern differs significantly for devices with and without antenna. Furthermore, the antenna-induced single-mode emission is dominant from room temperature (300 K) down to 200 K, whereas the cavity without an antenna is multimodal and its dominant emission wavelength is highly temperature-dependent.