Solution processed transparent conductive electrodes (TCEs) were fabricated via layer-by-layer (LBL) deposition of silver nanowires (AgNWs). First, the AgNWs were coated on (3-Mercaptopropyl)trimethoxysilane modified glass substrates. Then, multilayer AgNW films were obtained by using 1,3-propanedithiol as a linker via LBL deposition, which made it possible to control the optical transmittance and sheet resistance of multilayer thin films. Next, thermal annealing of AgNW films was performed in order to agent their electrical conductivity. AgNW monolayer films were characterized by UV-Vis spectrometer, field emission scanning electron microscopy, optical microscopy, atomic force microscopy and sheet resistance measurement by four-point probe method. The high performances were achieved with multilayer films, which provided sheet resistances of 9 Ω/sq, 11 Ω/sq with optical transmittances of 71%, 70% at 550 nm, which are comparable to commercial indium tin oxide (ITO) electrodes. Finally, an organic photovoltaic device was fabricated on the AgNW multilayer electrodes for demonstration purpose, which exhibited power conversion efficiency of 1.1%.
We report the extraction of silicon via a carbothermal reduction process using a CO2 laser beam as a heat source. The surface of a mixture of silica and carbon black powder became brown after laser beam irradiation for a few tens of seconds, and clear peaks of crystalline silicon were observed by Raman shift measurements, confirming the successful carbothermal reduction of silica. The influence of process parameters, including the laser beam intensity, radiation time, nitrogen gas flow in a reaction chamber, and the molar ratios of silica/carbon black of the mixture, on the carbothermal reduction process is explained in detail.
Germanium nanoparticles were synthesized and subjected to study as anode materials for lithium ion batteries and sodium ion batteries. Laser pyrolysis of GeH 4 was used to produce germanium nanoparticles and the average diameter of these nanoparticles was easily controlled by regulating sensitizer gas flow rates during the process. 60 and 10 nm diameter nanoparticles were synthesized and micron-size powder was purchased and these three pure germanium powder samples were tested as the anode materials of lithium ion batteries and sodium ion batteries in terms of cycle retention, long term cycles and the kinetics of reactions. Experimental results showed that the smallest powder sample which is synthesized, average 10 nm, exhibited excellent performances in both kinds of batteries. According to the results, the characteristics of batteries improved as the size of germanium powder decreased consistently. Pure germanium was thoroughly investigated as an anode of metal-ion batteries with regard to its powder size. The experimental data and synthesis approach of germanium nanoparticles suggested in this research would be a good example for the utilization of elemental germanium in high performance batteries.
Diabetes mellitus is a severe chronic disease, and the number of patients has increased. To manage blood glucose levels, patients should frequently measure their blood glucose and analyze which lifestyle habits affect blood glucose levels. However, it is hard to record and analyze the relationship between their blood glucose levels and lifestyle. The internet of things (IoT) is useful to interconnect, monitor, obtain, and process data between various devices used in everyday life to fulfill a common objective. This paper proposes an intelligent self-care platform using IoT technology that helps patients with chronic diabetes manage their blood glucose levels in their target range. In particular, we developed various devices called the self-care IoT pack. It consists of five different types of devices to obtain blood glucose levels, physical activities, food intake, medication, sleeping, and so on. They can collect blood glucose levels with lifestyles that automatically impact the patient’s blood glucose level. We also devised a self-care application to display and analyze the data obtained from the IoT pack. Consequently, the proposed self-care IoT platform collects the blood glucose levels and the lifestyles without any burden of record. By reviewing the accumulated information, the patients can find bad habits in blood glucose management and improve their lifestyle.
Exercise enables continuous glycemic control for diabetic patients, and it is effective in preventing diabetic complications and maintaining emotional stability. However, it is difficult for diabetic patients to know the appropriate intensity and duration of exercise. Excessive exercise causes sudden hypoglycemia, and patients avoid therapeutic exercise or perform it conservatively owing to the repeated hypoglycemia symptoms. In this paper, we propose a new therapeutic exercise platform that supports type 2 diabetes patients to exercise regularly according to the exercise prescription received from the hospital. The proposed platform includes the following three significant contributions. First, we develop a hardware platform that automatically tracks and records all aerobic exercise performed by a patient indoors or outdoors using a wearable band and aerobic exercise equipment. Second, we devise a patient-specific exercise stress test to know whether the patient is exercising according to his or her usual exercise regimen. Finally, we develop a mobile application that informs patients in real-time whether they are exercising appropriately for their exercise regimen each time they exercise. For platform evaluation and future improvement, we received satisfaction ratings and functional improvements through a questionnaire survey on 10 type 2 diabetes patients and 10 persons without a diabetes diagnosis who had used the proposed platform for more than 3 months. Most users were (1) satisfied with automatic exercise recording, and (2) exercise time increased. Diabetics reported that their fasting blood glucose was dropped, and they were more motivated to exercise. These results prove that exercise must be combined with medication for blood glucose management in chronic diabetic patients. The proposed platform can be helpful for patients to continue their daily exercise according to their exercise prescription.