Pakistan has a key problem of power supply in urban as well as rural areas having very limited supply of electricity. Being an agricultural country, Pakistan produces a significant volume of agro-waste having little economic use at the moment. The increased consciousness in green house emission has motivated to develop new technologies to accommodate the detention and confiscation of CO 2 . Keeping in mind the scenario, the combustion and pyrolysis behavior of Pakistani lignite (PL), rice husk (RH) and their blends of PL50/RH50 wt.%, PL40/RH60 wt.% and PL30/RH70 wt.% were examined in oxy-fuel and nitrogen environments for their probable use as sustainable and alternative energy resource. Combustion profiles of rice husk and lignite blends lie between those of individual fuels. Thermal stability of the lignite was observed to be decreased as increase of rice husk and suggest favoring when more energy is needed in short interval of time. Energy potential of PL50/RH50 blend was better due to the presence of higher amount of carbon and calorific value, low amount of ash and sulfur contents. Activation energy found to be decreased with the increase of rice husk quantity in pyrolysis reaction and associated with carbon content of lignite. The reduction in activation energy indicated the decrease in the operational temperature and suggests that gasification process will start at lower temperature for blends of lignite and rice husk than individual lignite.
The quest to research the new engineering materials for energy applications is increasing day by day due to decrease in fossil fuel materials. Moreover, the management of municipal solid waste (MSW) by converting it to the energy is need of our society to address the energy shortage as well as environmental issues. Refused derived fuel (RDF) material is one of the energy products of MSW, whose reliability and quality with respect to the energy is analyzed in this work. Three different RDF materials (RDF-A, RDF-B and RDF-C) have been characterized by thermal analysis techniques to suggest best RDF based on energy efficiency. The results showed that the RDF-A contains higher amounts of carbon (52.44%) and hydrogen (4.184%) contents and good calorific value (5278 kcal/kg), which leads to a better fuel quality. TGA analysis revealed that with the increase in volatile matter fraction of RDF materials, the retention time under combustion atmosphere has also been increased accordingly. In the light of all results RDF-A was suggested to be a good candidate for energy applications and can be used as fuel for various combustion reactions.
The intensification of municipal-solid-waste (MSW) production, energy usage, and the curb of the landfill have developed the need for our society to use MSW under the vision of a waste-to-energy (WTE) approach to eradicating MSW as well as to address the energy issues across the world. The WTE alteration is an environment-friendly way of disposing of MSW. This study examines the usage of plastic, wood, and paper for refuse-derived fuel (RDF) production. The RDF is solitary of MSW energy yields, whose dependability and superiority are analysed in the current work. Two different RDF have been obtained from diverse waste streams at the plant site to find the finest RDF based on energy efficiency. Plastics, wood, and paper are the principal constituents in the method of occupied RDF. The results exhibited that the RDF-PA holds a high amount of carbon as-well-as hydrogen content and a decent calorific value, which leads to better fuel quality. The retention time under combustion and pyrolysis, the volatile matter portion of RDF, has increased accordingly. As per obtained results, RDF-PA is a good option for energy applications and fuel for combustion and pyrolysis reactions.
1 January 2020 in IOP Conference Series: Materials Science and Engineering
The increased realization in greenhouse emission has encouraged to grow new technologies to accommodate the confinement and seizure of CO2. Keeping this situation, the thermal behaviour of lignite, Rice husk, besides their mergers throughout pyrolysis and combustion procedures, was examined in the study for their possible usage as a sustainable and substitute energy resource. The experiments were done in a thermo-gravimetric analyser at a heating rate of 40 °C/min and range from standard room-temp up to 950°C. These blends presented diverse ignition as well as combustion actions dependent on the proportion of rice husk and atmosphere (Oxy-fuel or Nitrogen). These investigational outcomes support to describe as well as expect the performance of lignite and rice husk blends in real applications.