[011] poled relaxor-PT single crystals provide superior piezoelectric constants and electromechanical coupling factors in the 32 crystal directions, and also exhibit high electrical stability under compressive stresses and temperature changes. In particular, Mn-doped Pb(In_1/2Nb_1/2)O₃-Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃ (Mn:PIN-PMN-PT) single crystals show a superior coercive field (E_C ≥ 8.0 kV/cm) and mechanical quality factor (Q_m ≥ 1030), making them suitable for high-power transducers. The high-power characteristics of [011] poled single crystals have been verified from a material perspective; thus, further investigation is required from a transducer perspective. In this study, the high-power characteristics of piezoelectric transducers based on [011] poled PIN-PMN-PT and [011] poled Mn:PIN-PMN-PT single crystals were investigated. To analyze the driving limits of the single crystals, the polarization–electric field (P–E) curves, as a function of the driving electric field, were measured. The results showed that [011] poled Mn:PIN-PMN-PT single crystals demonstrate lower energy loss and THD (Total Harmonic Distortion), directly relating to the driving efficiency and linearity of the transducer. Additionally, [011] poled Mn:PIN-PMN-PT crystals provide excellent stability under the compressive stress and temperature changes. To analyze the high-power characteristics of [011] poled single-crystal transducers, two types of barrel-stave transducers, based on [011] poled PIN-PMN-PT and [011] poled Mn:PIN-PMN-PT, were designed and fabricated. The changes in the impedance and transmitting voltage response with respect to the driving electric fields were measured, and the energy loss and THD of the transducers with respect to the driving electric fields were examined to assess the driving limit of the [011] poled single-crystal transducer. The high-power characteristic tests confirmed the stability of [011] poled Mn:PIN-PMN-PT single crystals and verified their potential for high-power transducer applications.

Transducer arrays are commonly analyzed by the finite element method (FEM) with high accuracy, but it is costly, particularly when having flexible surrounding structures. In this study, we developed an equivalent circuit (EC)-based model of an array of transducers with flexible surrounding structures for effective analysis. The impedance matrix was first constructed by coupling the electrical, mechanical impedance, and the acoustic radiation impedance obtained by the EC method and finite element-boundary element (FE-BE) coupling method. The transfer matrix of far-field pressure to the transducer response was then constructed by the FE-BE coupling method, and finally the sound pressure of the external acoustic field was obtained. To verify the accuracy, the results of the proposed method were compared with those of the conventional FEM. To evaluate the efficiency of the proposed method, the reduction in the degrees of freedom (DOFs) of the proposed method from the conventional FEM analysis was investigated. The simulation results of the proposed method are highly accurate and efficient. The proposed method is expected to be useful for conceptual design.