Airborne electromagnetics is an effective and efficient exploration tool in shallow mineral exploration for its high efficiency and low cost. In 2016, airborne electromagnetic and airborne magnetic surveys have been carried out at the border of Xinjiang Uygur Autonomous Region and Gansu Province, the Northwest China. With an integrated system, the airborne electromagnetics and airborne magnetic data were collected simultaneously by AreoTEM-IV system from Aeroquest International Limited in Vancouver, BC, Canada, and the CS3 Cesium Vapor magnetometer from Scintrex in Concord, ON, Canada. About 3149 line-km of both data with 250 m line space were acquired. After data processing, the comprehensive analysis and interpretation of resistivity and magnetic anomalies has been carried out to infer lithological structure and outline the potential ore deposits. Verified by the ground surveys, seven outlined anomalies are consistent with the known ore sites, and one new gold deposit and several mineralization clues were found. The prospective reserves of gold are expected to exceed 10 tons. Besides, some prospecting target areas were outlined as the possible locations of copper–nickel deposits. The successful case shows the airborne magnetic data accords with geological structures, and the airborne electromagnetic method is effective in finding metal mineral resources, which can help to quickly identify potential ore targets with no surface outcrop.
An airborne transient electromagnetic (TEM) has been conducted in Baiyangdian Area to map resistivity distribution within the alluvial and lacustrine aquifers. This investigation evaluated the reliability of resistivity models of the TEM data to infer lithological distribution in alluvial and lacustrine aquifers. The collected airborne TEM data were processed and inverted using spatially constrained 1D inversion method. And the 3D electrical structure, which maps electrical resistivity trends to depths of about 160 m, can be established through interpolation. Comparison of the resistivity models to drill logs indicates resistive permeable coarse-grained sediments and conductive fine-grained sediments which are relatively impermeable. Hence, the 3D electrical structure that are related to lateral and vertical variation in lithology, can serve as baseline information for groundwater potential identification. This research indicates that groundwater detection is an ideal target for mapping with airborne TEM techniques because of the high electrical resistivity of permeable coarse-grained deposits and its contrast with impermeable fine-grained deposits.