The optimal design of hydraulic excavator working device is often characterized by computationally expensive analysis methods such as finite element analysis. Significant difficulties also exist when using a sensitivity-based decomposition approach to such practical engineering problems because explicit mathematical formulas between the objective function and design variables are impossible to formulate. An effective alternative is known as the surrogate model. The purpose of this article is to provide a comparative study on multiple surrogate models, including the response surface methodology, Kriging, radial basis function, and support vector machine, and select the one that best fits the optimization of the working device. In this article, a new modeling strategy based on the combination of the dimension variables between hinge joints and the forces loaded on hinge joints of the working device is proposed. In addition, the extent to which the accuracy of the surrogate models depends on different design variables is presented. The bionic intelligent optimization algorithm is then used to obtain the optimal results, which demonstrate that the maximum stresses calculated by the predicted method and finite element analysis are quite similar, but the efficiency of the former is much higher than that of the latter.
1 January 2016 in Journal of Mechanical Engineering
The current research of the decomposition methods of complex optimization model is mostly based on the principle of disciplines, problems or components. However, numerous coupling variables will appear among the sub-models decomposed, thereby make the efficiency of decomposed optimization low and the effect poor. Though some collaborative optimization methods are proposed to process the coupling variables, there lacks the original strategy planning to reduce the coupling degree among the decomposed sub-models when we start decomposing a complex optimization model. Therefore, this paper proposes a decomposition method based on the global sensitivity information. In this method, the complex optimization model is decomposed based on the principle of minimizing the sensitivity sum between the design functions and design variables among different sub-models. The design functions and design variables, which are sensitive to each other, will be assigned to the same sub-models as much as possible to reduce the impacts to other sub-models caused by the changing of coupling variables in one sub-model. Two different collaborative optimization models of a gear reducer are built up separately in the multidisciplinary design optimization software iSIGHT, the optimized results turned out that the decomposition method proposed in this paper has less analysis times and increases the computational efficiency by 29.6%. This new decomposition method is also successfully applied in the complex optimization problem of hydraulic excavator working devices, which shows the proposed research can reduce the mutual coupling degree between sub-models. This research proposes a decomposition method based on the global sensitivity information, which makes the linkages least among sub-models after decomposition, and provides reference for decomposing complex optimization models and has practical engineering significance.
Symmetry widely exists in natural objects and man-made objects. Mechanical structures, as man-made objects, have the property of symmetry without exception. The existence of symmetry affects the function and performance of mechanical products. Therefore, on the basis of analyzing a large number of examples and referring to the Schoenflies symbol of crystal, the symmetry of mechanical structures is divided into point group symmetry and space group symmetry, and these two types are further subdivided according to the types and spatial positions of the symmetry elements. Then, the general effects of symmetry are summarized according to symmetry types and functions, and several symmetry rules for design are further refined. Finally, after defining the requirements of speed change and technology background, a multispeed device for bicycle shaft drive is proposed by applying symmetry knowledge comprehensively.
Symmetry has been widely and deeply researched in basic science, and many mature results have been obtained so far. However, the widespread existence of symmetry in applied science is not in direct proportion to the attention it has received. Through a large number of examples studies, almost all mechanical structures are found to have symmetry, and most of them have the characteristics of point group symmetry. Therefore, the concept of point group symmetry in crystallography was extended to the field of machinery and adjusted according to the mechanical structures. First of all, the classification of mechanical point group symmetry is proposed, and how point group symmetry is applied in machinery is illustrated with examples. Then, the requirements of symmetry are analyzed and compared. Furthermore, the data mining software RapidMiner is used to mine the association rules between requirements and symmetry. Based on the mining results, the four selection principles of point group symmetry are summarized to provide ideas for structure design. Finally, a new type of gear pump with radial force balancing is invented by comprehensively using the mining results and selection principles.