Documentation of structural visual inspections is necessary for its monitoring, maintenance, and decision about its rehabilitation, and structural strengthening. In recent times, close-range photogrammetry (CRP) based on unmanned aerial vehicles (UAVs) and terrestrial laser scanners (TLS) have greatly improved the survey phase. These technologies can be used independently or in combination to provide a 3D as-is image-based model of the railway bridge. In this study, TLS captured the side and bottom sections of the deck, while the CRP-based UAV captured the side and top sections of the deck, and the track. The combination of post-processing techniques enabled the merging of TLS and CRP models, resulting in the creation of an accurate 3D representation of the complete railway bridge deck. Additionally, a 3D as-designed model was developed based on the design plans of the bridge. The as-designed model is compared to the as-is model through a 3D digital registration. The comparison allows the detection of dimensional deviation and surface alignments. The results reveal slight deviations in the structural dimension with a global average value of 9 mm.

This article addresses the state of the art of methodologies for bridge inspection with potential for inclusion in Bridge Management Systems (BMS) and within the scope of the IABSE Task Group 5.9 on Remote Inspection of Bridges. The document covers computer vision approaches, including 3D geometric reconstitution (photogrammetry, LiDAR, and hybrid fusion strategies), damage and component identification (based on heuristics and Artificial Intelligence), and non-contact measurement of key structural parameters (displacements, strains, and modal parameters). Additionally, it addresses techniques for handling the large volumes of data generated by bridge inspections (Big Data), the use of Digital Twins for asset maintenance, and dedicated applications of Augmented Reality based on immersive environments for bridge inspection. These methodologies will contribute to safe, automated, and intelligent assessment and maintenance of bridges, enhancing resilience and lifespan of transportation infrastructure under changing climate.

Remote visual inspections are valuable tools for maintaining bridges in safe operation. In the case of old structures with incomplete documentation, the verification of dimensions is also an essential aspect. This paper presents an attempt to use a Scanning Total Station (STS) and Unmanned Aerial Vehicle (UAV) for the inspection and inventory of bridge dimensions. The STS’s measurements are conducted by applying two methods: the direct method using a total station (TS) and advanced geometric analyses of the collected point cloud. The UAV’s measurements use a Structure from Motion (SfM) method. Verification tests were conducted on a steel truss railway bridge over the largest river in Poland. The measurements concerned both the basic dimensions of the bridge and the details of a selected truss connection. The STS identified a significant deviation in the actual geometry of the measured connection and the design documentation. The UAV’s inspection confirmed these findings. The integration of STS and UAV technologies has demonstrated significant advantages, including STS’s high accuracy in direct measurements, with deviations within acceptable engineering tolerances (below a few mm), and the UAV’s efficiency in covering large areas, achieving over 90% compliance with reference dimensions. This combined approach not only reduces operating costs and enhances safety by minimizing the need for heavy machinery or scaffolding but also provides a more comprehensive understanding of the structural condition.

PCI Journal Paper Title: Reliability-based sensitivity analysis for prestressed concrete girder bridges