Rice husk biochar (RHB) and phosphate rock (PR) are locally accessible resources that poor farmers in Sub-Saharan Africa (SSA) can utilize to increase rice productivity. However, biochars are variable depending on feedstock, pyrolysis temperature, and duration. Phosphate rocks from SSA are of low solubility. The goal of this study was to determine whether pyrolysis of rice husk (RH), calcination of PR, and the calcination/pyrolysis of a RHB-PR mixture at 300 °C, 500 °C, and 700 °C can increase formic acid (FA)- extractable phosphorous (P). The properties of these RHBs were compared to the properties of RHB produced through a simple farmer-friendly pyrolysis technique termed “Kun-tan”. Properties of calcinated PR were also compared to the raw PR. Quartz formed from amorphous SiO2 during RH pyrolysis and was the dominant mineral phase in the biochars, irrespective of the pyrolysis temperature. Formic acid-extractable P content, pH, and ash content of the biochars increased with increasing pyrolysis temperature. At 700 °C, FA-extractable P content of the RHB was 219% more than the feedstock. Hydroxyapatite and quartz were the dominant minerals in the PR irrespective of calcination temperature, indicating that hydroxyapatite and quartz were stable to at least 700 °C. Rather, calcination decreased the FA-extractable P content of the PR.
Precision agriculture (PA) utilizes spatial and temporal variability to improve the sustainability and efficiency of farming practices. This study used high-resolution imagery from UAS to evaluate maize yield variability across three fields in Ghana: Sombolouna, Tilli, and Yendi, exploiting the potential of UAS technology in PA. Initially, excess green index (EGI) classification was used to differentiate between bare soil, dead vegetation, and thriving vegetation, including maize and weeds. Thriving vegetation was further classified into maize and weeds, and their corresponding rasters were developed. Normal difference red edge (NDRE) was applied to assess maize health. The Jenks natural breaks algorithm classified maize rasters into low, medium, and high differential yield zones (DYZs). The percentage of bare spaces, maize, weed coverages, and total maize production was determined. Significant variations in field conditions showed Yendi had 34% of its field as bare, Tilli had the highest weed coverage at 22%, and Sombolouna had the highest maize crop coverage at 73.9%. Maize yields ranged from 860 kg ha−1 in the low DYZ to 4900 kg ha−1 in the high DYZ. Although yields in Sombolouna and Tilli were similar, both fields significantly outperformed Yendi. Scenario analysis suggested that enhancing management practices to elevate low DYZs to medium levels could increase production by 2.1%, while further improvements to raise low and medium DYZs to high levels could boost productivity by up to 20%.
4 June 2013 in Soil Science Society of America Journal
TThe following three objectives were tested in this study: (1) investigate the utility of low-altitude remote sensing using UAS technology to compare the effects of different N application systems in rice production; (2) use spatial extrapolation to scale up plot-level generated to farmer field rice yield data based on crop spectral signatures, and (3) predict and map out rice productivity as a function of N placement systems. Images were captured on a UAV platform at midseason of the rice crop. Orthomosaics were developed for selected fields in rice-producing zones. Grain yields were assessed from low, medium, and high crop health plots delineated based on NDVI values. On the plot scale, UDP outyielded non-UDP by 0.84%. Individual plot yield data were scaled up to the farmer field level through Jenks natural breaks classification and es-tablishing an empirical relationship between OSAVI and plot yields. Assessment of the scaled-up field levelfield-level data also confirmed the superiority of UDP N man-agement over the non-UDP systems in promoting rice yields. Scaling up plot scale da-ta to whole field levels also facilitated generating and mapping expected yield maps for individual farmer fields in the three zones studied. This study has established a tangible simple but tangible protocol protocol for predicting and mapping rice yields in small-scale farmer fields using UAS data.
Unmanned aerial vehicle (UAV)-based remote sensing combined with artificial intelligence (AI) has emerged as a key enabler of climate-smart agriculture (CSA). However, the extent to which these technologies operationalize CSA’s three pillars, productivity, adaptation, and mitigation, remains unevenly assessed. This study presents a PRISMA-guided systematic review of 59 peer-reviewed studies examining UAV–AI applications in agricultural systems. The synthesis categorizes platform configurations, sensor modalities, analytical architectures, geographic distribution, and data integration strategies, and evaluates their alignment with CSA objectives. Results indicate that productivity-oriented applications, including yield estimation, biomass mapping, and nutrient assessment, are the most mature, while adaptation-focused stress detection is also well established. In contrast, mitigation-oriented applications, such as carbon quantification and greenhouse gas monitoring, remain comparatively underrepresented. The analysis further reveals a growing convergence toward multimodal sensing and cross-scale data integration linking UAV observations with satellite and environmental datasets. However, substantial variability in validation approaches and dataset representativeness limits generalizability and scalability. Advancing UAV–AI contributions to CSA therefore requires methodological standardization, interoperable data governance, and strengthened institutional capacity. Collectively, the findings position UAV–AI systems as emerging components of climate-smart agricultural intelligence infrastructure rather than isolated monitoring tools.