End-of-life tires (ELTs) represent a great source of readily available, low-cost and sustainable construction materials having excellent engineering properties. Their reuse (in the form of granulated rubber mixed with soils) in large-volume recycling civil (geotechnical) engineering applications would be beneficial and should be encouraged. It is estimated that at present worldwide only less than 10% of ELTs are reused in geotechnical applications, while nearly 40% are recycled as tire-derived fuel. Although many studies have focused on the material characterization of soil-rubber mixtures (SRMs), it appears that the results of such investigations have not been properly compiled and compared, making it difficult to fully understand the potential applicability of SRMs. In an attempt to provide useful insights facilitating the use of SRMs as geotechnical construction materials, this review paper presents a comprehensive review of published research on the engineering properties of granular soils (i.e., mainly sand and gravel) blended with various recycled rubber inclusions. Available experimental data are scrutinized, and the results of the analyses are presented and discussed primarily in terms of effects of rubber content and aspect ratio (ratio of rubber to gravel median particle sizes) on compaction, permeability, strength and compression properties along with dynamic and cyclic deformation characteristics of SRMs. This review paper may help to alleviate the concerns of designers and consumers and encourage and further promote the use of recycled rubber tires on a larger scale in civil engineering projects.

End-of-life tires (ELTs) are tires, unusable in their original form, which go into a waste management scheme (for recycling and energy recovery purposes), or otherwise are disposed. In New Zealand, the annual disposal of 3.5 million ELTs is posing critical environmental and socio-economic issues, and the reuse of ELTs through large-volume recycling engineering projects is a necessity. In this study, gravel and recycled granulated rubber were mixed to explore the possibility of obtaining synthetic granular geomaterials (with adequate geotechnical and environmental characteristics) that are suitable as structural fills for geotechnical applications including foundation systems for low-rise light-weight residential buildings. Moreover, an original framework with a set of geo-environmental criteria is proposed for the acceptance of gravel–rubber mixtures (GRMs) as structural fills. It is shown that when gravel-size like rubber particles are used, GRMs with volumetric rubber content of 40% or less have adequate strength (ϕ’ > 30°), low compressibility (ε_v ≤ 3%), excellent energy adsorption properties, and acceptable leachate metal concentration values (e.g., Zn < 1 mg/L), making them ideal synthetic structural fill materials for many sustainable geotechnical applications.