Radiopacity is sometimes an essential characteristic of biomaterials that can help clinicians perform follow-ups during pre- and post-interventional radiological imaging. Due to their chemical composition and structure, most bioceramics are inherently radiopaque but can still be doped/mixed with radiopacifiers to increase their visualization during or after medical procedures. The radiopacifiers are frequently heavy elements of the periodic table, such as Bi, Zr, Sr, Ba, Ta, Zn, Y, etc., or their relevant compounds that can confer enhanced radiopacity. Radiopaque bioceramics are also intriguing additives for biopolymers and hybrids, which are extensively researched and developed nowadays for various biomedical setups. The present work aims to provide an overview of radiopaque bioceramics, specifically crystalline, non-crystalline (glassy), and nanostructured bioceramics designed for applications in orthopedics, dentistry, and cancer therapy. Furthermore, the modification of the chemical, physical, and biological properties of parent ceramics/biopolymers due to the addition of radiopacifiers is critically discussed. We also point out future research lacunas in this exciting field that bioceramists can explore further.

Early abortion is one of the most common complications during pregnancy. However, the frequent handling of the genital region, more precisely the vagina, which causes discomfort to patients in this abortion process due to the frequency of drug insertion, as four pills are inserted every six hours, has led to the search for alternatives to alleviate the suffering caused by this practice in patients who are already in a shaken emotional state. Hence, this work aimed to develop composites of gelatin and misoprostol, using a conventional single-dose drug delivery system. These composites were prepared by freeze/lyophilization technique, by dissolving the gelatin in distilled water, with a concentration of 2.5% (w/v), and misoprostol was incorporated into the gelatin solution at the therapeutic concentration (800 mcg). They were subsequently molded, frozen and lyophilized. The samples of the composites were then crosslinked with sodium tripolyphosphate (TPP) 1% (v/v) with respect to the gelatin mass for 5 min. The characterization techniques used were: Optical Microscopy (OM), Fourier Transformed Infrared Spectroscopy (FTIR), Thermogravimetry (TG), Swelling, Biodegradation and Cytotoxicity. In OM it was observed that the addition of the drug improved the cylindrical appearance of the compounds, in comparison with the sample that was composed of only gelatin. There was a reduction in the degree of swelling with the addition of the drug and crosslinking. The cytotoxicity test indicated the biocompatibility of the material. Based on the results obtained in these tests, the composites have therapeutic potential for uterine emptying in pregnancy failures, especially in the first trimester.

Chitosan is a natural, biodegradable, non-toxic and biocompatible polymer, with characteristics such as a healing, hemostatic, antimicrobial agent, among others. Therefore, the aim of this study is to develop a tubular chitosan device for use as a prosthetic coating application in vascular surgery. The chitosan wires were obtained by the spinning method in a 2M sodium hydroxide coagulant solution (NaOH) and used in the form of wires and screens as a reinforcement structure to obtain the tubes. In order to characterize the tubes, optical microscopy, contact angle, degree of swelling, in vitro biodegradation, cytotoxicity and tensile strength were used. The results indicated that the tubes have uniformity over the entire length and as for the resistance to the trace, the tube reinforced with mesh presented greater deformation, while the tube reinforced with wire presented a higher value of rupture stress. The degree of swelling was higher in chitosan tubes with mesh. As for the biodegradation test, it was observed that the lysozyme samples showed greater loss of mass and the cytotoxicity test confirmed the cell viability of the material, concluding that the tubes reinforced with chitosan wires are promising for use in vascular surgeries.

Cranioencephalic traumatism (TBI) is a common situation in trauma hospitals and has become responsible for high rates of mortality worldwide. When the victim of TBI is affected by injuries to the skullcap with a need for grafting, problems regarding the availability of suitable and affordable materials eventually happen. In this study, a 3D structure of Polyetheretherketone (PEEK) that mimics the cranial bone morphology for use in cranioplasty was developed. Samples of different formulations, in the form of round bars, were obtained through uniaxial compression, and porosity was controlled by the salt leaching technique. Then, the specimens were characterized in terms of pore morphology and distribution, surface roughness, compression resistance and cytotoxicity. Results exhibited high levels of similarity of the 3D strutures of PEEK to the natural human bone, which indicates the effectiveness of the proposed method in mimicking the morphology of the compact/porous/compact system of the skullcap (diploe).