Somatic embryogenesis is being piloted for the commercial production of genetically improved Norway spruce (Picea abies L. Karst) forest regeneration material in Finland. The main challenge to making the process commercially relevant is the dependence on time-consuming and highly skilled manual labor. Automation and scaling up are needed to improve cost-effectiveness. Moving from the proliferation of embryogenic tissue on semisolid media to suspension cultures could improve process scalability. In a series of four experiments (overall, with 20 cell lines, 4–9 per experiment), the suitability of proliferation in suspension culture for Norway spruce somatic embryogenesis was evaluated based on the growth rate, indicators of stress conditions, good-quality cotyledonary embryo yield, and embling survival in a greenhouse. The proliferation rate in suspension was found equal to on semisolid media, but with a remarkable genotypic variation. Embryogenic tissue matured directly without pre-treatments from suspension onto semisolid media produced lower numbers of good-quality embryos than tissue matured from semisolid media. Rinsing the suspension-grown tissue with hormone-free liquid media before maturation improved embryo yield, bringing it closer to that of semisolid-grown tissue. Decreasing 6-benzylaminopurine and 2,4-dichlorophenoxyacetic acid concentrations in suspension proliferation media to 0.5 or 0.1 times those in semisolid media did not affect tissue growth and did not improve embryo production. The hydrogen peroxide (H2O2) content and guaiacol peroxidase activity were elevated in suspension cultures compared with semisolid medium, which had the same plant growth regulator content. In one experiment out of four, the greenhouse survival of germinants was lower when proliferation was carried out in full strength suspension than on semisolid media; in other experiments the survival rates were equal.
9 March 2020 in In Vitro Cellular & Developmental Biology - Plant
Somatic embryogenesis has already been used for Norway spruce (Picea abies(L.) Karst) embling production on a laboratory scale, but automation is needed to increase efficiency and reduce costs. One option to scale up production is mass production in bioreactors. In a series of experiments, a pro-embryogenic mass was propagated using Plantform temporary immersion system bioreactors, and the effect of different aeration cycles, support pad materials, and post-maturation treatments (rinsing and desiccation) on the embryo yield and embling survival after 4 to 6 mo in a greenhouse was tested. Three genotypes were used to test each treatment. The best aeration frequency was 20 min every 4 h, while a lower or higher frequency did not generally improve embryo production. Filter paper on plastic netting was the best support pad material in terms of usability and embryo production (varying from 177 ± 20 to 696 ± 109 per g pro-embryogenic mass). The separation of the embryos from the undeveloped cell mass by rinsing with sterile water resulted in reduced survival of the emblings. Desiccation treatment on nested plates with the embryos on the inner plate with or without filter paper improved their survival. Bioreactors were laborious to prepare, load, and clean. Improvements in embryo production can be achieved by optimizing the process, but bioreactors based on the requirements of somatic embryogenesis are needed to enable their use in the mass production of Norway spruce emblings.
Elms are threatened by Dutch elm disease, and conservation methods are needed to protect their genetic diversity. Cryopreservation of dormant buds allows large numbers of genotypes to be conserved with small space requirements and minimal upkeep. Cryopreservation through slow controlled cooling was tested for both elm species native to Finland, Ulmus glabra and Ulmus laevis. Regeneration of the thawed buds by micropropagation was studied on different basal media and using different growth regulators. Multiple surface sterilisation methods were tried out for bud explants. The multiplication of U. glabra was investigated with Driver and Kuniyuki walnut medium with either 0.5 mg/L meta-topolin or 0.5 mg/L 6-benzylaminopurine. Rooting with short indole-6-butyric acid induction in liquid medium and direct transplantation of the shoots to peat ex vitro after induction were tested. For initiation, either Murashige and Skoog or Driver and Kuniyuki walnut medium with 0.02 mg/L gibberellic acid 4 + 7 and 0.5 mg/L 6-benzylaminopurine were found to best promote shoot formation. Surface sterilisation remains the most challenging step. No significant differences were found between the multiplication media in either shoot production or rooting success. Rooting by direct transplanting was achieved in both species, but further development is required before application on a larger scale. With further improvements to sterilisation success especially in U. glabra, the method can be applied to the conservation of genetic resources of both U. laevis and U. glabra, and knowledge of regeneration success can be used to design the cryoconservation plan and optimise the sampling.
Vegetative propagation opens opportunities for the multiplication of elite tree progeny for forest regeneration material. For conifers such as Norway spruce (Picea abies) the most efficient vegetative propagation method is seed multiplication through somatic embryogenesis. Efficient culture methods are needed for somatic embryogenesis to be commercially viable. Compared to culturing as clumps, filter disc cultures can improve the proliferation of embryogenic tissue (ET) due to more even spread and better developmental synchronization. In this study, ET proliferation on filter discs was compared to proliferation as clumps. The study comprised 28 genotypes in four trials. The benefits of adding a pre-maturation step and the selection of fresh ET for the subculture were evaluated. Pre-maturation on hormone-free media before maturation did not significantly improve embryo yield but improved greenhouse survival from 69% to 80%, although there was high variation between lines. Filter disc cultivation of ET did result in better growth than in clumps but was more dependent on ET selection and the amount of ET than the clump cultivation method. Filter proliferation also favors certain lines. Post-maturation storage can be used to change the storage compound composition of the produced mature embryos. The embryo storage compound profile was analyzed after post-maturation cold storage treatments of 0, 4, 8, 31, and 61 weeks and compared to that of the zygotic embryos. Cold storage made the storage compound profile of somatic embryos closer to that of zygotic embryos, especially regarding the raffinose family oligosaccharides and storage proteins. Sucrose, hexose, and starch content remained higher in somatic embryos even through cold storage. Prolonged storage appeared less beneficial for embryos, some of which then seemed to spontaneously enter the germination process.
For Norway spruce (Picea abies (L.) Karst.) somatic embryogenesis (SE) culture conditions throughout the propagation process affect the final result. Many critical phases can be identified, and all of them cumulatively increase the production costs of SE plants if they cannot be controlled. In order to determine the best lighting protocol for each SE step, Norway spruce embryogenic tissue (ET) was proliferated, and somatic embryos were matured under different light wavelengths, wavelength combinations, and in the dark. Overall, using low-intensity LED lights during proliferation or at the end of maturation had little effect on the growth of ET, embryo productivity, or embryo survival; on the other hand, major negative effects could not be seen. This is beneficial from a practical point of view, indicating no need for lighting or protection of SE cultures from light during their handling in these steps of the propagation process. When somatic embryos were germinated under different spectra, significant differences in embling shoot and root growth, as well as in the survival of the emblings, were found. The best treatment varied between trials, and the genotype of the SE culture was found to have a stronger effect than the light spectrum, indicating that various light spectra and also intensity adjusted using pulse width modulation (PWM) can be successfully applied to the SE germination phase in Norway spruce.
While the role of both elevated levels of circulating bacterial cell wall components and adipose tissue in hepatic fat accumulation has been recognized, it has not been considered that the bacterial components-recognizing adipose tissue receptors contribute to the hepatic fat content. In this study we found that the expression of adipose tissue bacterial flagellin (FLG)-recognizing Toll-like receptor (TLR) 5 associated with liver fat content (r = 0.699, p = 0.003) and insulin sensitivity (r = -0.529, p = 0.016) in humans (n = 23). No such associations were found for lipopolysaccharides (LPS)-recognizing TLR4. To study the underlying molecular mechanisms of these associations, human HepG2 hepatoma cells were exposed in vitro to the conditioned culture media derived from FLG or LPS-challenged human adipocytes. The adipocyte-mediated effects were also compared to the effects of direct HepG2 exposure to FLG and LPS. We found that the media derived from FLG-treated adipocytes stimulated fat accumulation in HepG2 cells, whereas either media derived from LPS-treated adipocytes or direct FLG or LPS exposure did not. This is likely due to that FLG-treatment of adipocytes increased lipolysis and secretion of glycerol, which is known to serve a substrate for triglyceride synthesis in hepatocytes. Similarly, only FLG-media significantly decreased insulin signaling-related Akt phosphorylation, IRS1 expression and mitochondrial respiratory chain ATP5A. In conclusion, our results suggest that the FLG-induced TLR5 activation in adipocytes increases glycerol secretion from adipocytes and decreases insulin signaling and mitochondrial functions, and increases fat accumulation in hepatocytes. These mechanisms could, at least partly, explain the adipose tissue TLR5 expression associated with liver fat content in humans.