In this paper, we introduce the new concept of Crowd-Detectable Zero-Energy-Devices. Such devices harvest solar or ambient light energy to power themselves, backscatter ambient waves to communicate, and are detected simultaneously by a smartphone connected to the network, and by the network itself, as long as the device is close to the considered smartphone. Such a device is a promising sustainable solution for the future of the Internet of Things. We describe an example of use case: asset tracking with zero added energy, zero new signals and zero new infrastructure in the network, thanks to the anonymous and transparent participation of smartphones connected to the wireless network. We then present our first prototypes of such devices that backscatter TV, 4G and 5G signals, and show our first experiments in challenging conditions and environments.

Low-power wireless applications require different trade-off points between latency, reliability, data rate and power consumption. Given such a set of constraints, which physical layer should I be using? We study this question in the context of 6TiSCH, a state-of-the-art recently standardized protocol stack developed for harsh industrial applications. Specifically, we augment OpenWSN, the reference 6TiSCH open-source implementation, to support one of three physical layers from the IEEE802.15.4g standard: FSK 868 MHz which offers long range, OFDM 868 MHz which offers high data rate, and O-QPSK 2.4 GHz which offers more balanced performance. We run the resulting firmware on the 42-mote OpenTestbed deployed in an office environment, once for each physical layer. Performance results show that, indeed, no physical layer outperforms the other for all metrics. This article argues for combining the physical layers, rather than choosing one, in a generalized 6TiSCH architecture in which technology-agile radio chips (of which there are now many) are driven by a protocol stack which chooses the most appropriate physical layer on a frame-by-frame basis.

New radio chips implement different physical layers, allowing firmware to change modulation, datarate and frequency dynamically. This technological development is an opportunity for industrial low-power wireless networks to offer even higher determinism, including latency predictability. This article introduces 6DYN, an extension to the IETF 6TiSCH standards-based protocol stack. In a 6DYN network, nodes switch physical layer dynamically on a link-by-link basis, in order to exploit the diversity offered by this new technology agility. To offer low latency and high network capacity, 6DYN uses heterogeneous slot durations: the length of a slot in the 6TiSCH schedule depends on the physical layer used. This article shows how reserved bits in 6TiSCH headers can be used to standardize 6DYN and details its implementation in OpenWSN, a reference implementation of 6TiSCH.

Digital Enhanced Cordless Telecommunications (DECT) Ultra Low Energy (ULE) is a low-power air interface technology that is proposed by the DECT Forum and is defined and specified by ETSI. The DECT air interface technology has been used worldwide in communication devices for more than 20 years. It has primarily been used to carry voice for cordless telephony but has also been deployed for data-centric services. DECT ULE is a recent addition to the DECT interface primarily intended for low-bandwidth, low-power applications such as sensor devices, smart meters, home automation, etc. As the DECT ULE interface inherits many of the capabilities from DECT, it benefits from operation that is long-range and interference-free, worldwidereserved frequency band, low silicon prices, and maturity. There is an added value in the ability to communicate with IPv6 over DECT ULE, such as for Internet of Things applications. This document describes how IPv6 is transported over DECT ULE using IPv6 over Low-Power Wireless Personal Area Network (6LoWPAN) techniques. Mariager, et al.

Smart metering IoT applications are among the most energy-critical in the current panorama. Metering sensors are battery-powered and are expected to have a lifetime exceeding ten years. In order to achieve such long operation duration, a generic header compression mechanism named Static Context Header Compression (SCHC) has been introduced and accepted as a standard by the Internet Engineering Task Force (IETF). This paper aims to demonstrate the energy savings enabled by the use of SCHC on a cellular IoT network by the means of real-life implementation and measurements. Experiments are conducted in a controlled environment for different scenarios and considering multiple parameters such as message size and radio conditions. Measurements show the high impact of this header compression mechanism, particularly when the radio conditions are bad and repetitions are used to improve the reliability of the transmission: a reduction of up to 40% in energy consumption is observed. Using SCHC over the non-IP transport mode (NIDD) of NB-IoT compared to the legacy IP mode also enables significant energy savings and allows the latency to be reduced while maintaining the interoperability provided by the IP layer.

In 1794, French Engineer Claude Chappe coordinated the deployment of a network of dozens of optical semaphores. These formed “strings” that were hundreds of kilometers long, allowing for nationwide telegraphy. The Chappe telegraph inspired future developments of long-range telecommunications using electrical telegraphs and, later, digital telecommunication. Long-range wireless networks are used today for the Internet of Things (IoT), including industrial, agricultural, and urban applications. The long-range radio technology used today offers approximately 10 km of range. Long-range IoT solutions use “star” topology: all devices need to be within range of a gateway device. This limits the area covered by one such network to roughly a disk of a 10 km radius. In this article, we demonstrate a 103 km low-power wireless multi-hop network by combining long-range IoT radio technology with Claude Chappe’s vision. We placed 11 battery-powered devices at the former locations of the Chappe telegraph towers, hanging under helium balloons. We ran a proprietary protocol stack on these devices so they formed a 10-hop multi-hop network: devices forwarded the frames from the “previous” device in the chain. This is, to our knowledge, the longest low power multi-hop wireless network built to date, demonstrating the potential of combining long-range radio technology with multi-hop technology.