Lorenzo Bergonzi

Prof. Lorenzo Bergonzi

MaCh3D srl
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2021 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
LBLorenzo Bergonzi
Lorenzo Bergonzi
MVM Vettori
M Vettori
LSL Stefanini
L Stefanini
LDL D’alcamo
L D’alcamo
Fused Deposition Modelling (FDM) is one of the most widespread additive manufacturing technologies due to its relatively low cost and simplicity. Usually, printed parts have an internal structure (infill) that is not produced with 100% material density. This strategy is adopted to save material and time thanks also to the fact that when a component is loaded, stress are concentrated on its skin rather than in the internal section. Furthermore, infill structure can have different densities and topology. Slicer software have various configurations that can be exploited to produce internal structures: according to All3DP [1], some are intended for functional parts while others are more indicated to prototypes only. Aim of this work, is to compare the effect of different infill topologies produced using Ultimaker CURA [2] slicing software on material mechanical properties. Preliminary experimental activity has been carried out in order to determine the most suitable printing temperature. MaCh3D, an innovative miniaturized universal testing machine [3] was used to perform uniaxial tensile tests. Results underline the difference between different kind of infill in term of mechanical properties, given the same infill density across all specimens. Additionally, in order to evaluate infill percentage effect on mechanical properties, some of the most performing infill from the characterisation activity have been selected and specimens produced with 20%, 50%, 80% infill percentage. In the end, both infill topology as well as density impacts on mechanical properties.

1 January 2019 in Procedia Structural Integrity
Verified
Journal Article
Open access
LBLorenzo Bergonzi
Lorenzo Bergonzi
MVMatteo Vettori
Matteo Vettori
APAlessandro Pirondi
Alessandro Pirondi

18 February 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Ruben ForestiRuben Foresti
Ruben Foresti
BGBENEDETTA GHEZZI
BENEDETTA GHEZZI
MVMatteo Vettori
Matteo Vettori
LBLorenzo Bergonzi
Lorenzo Bergonzi
SASilvia Attolino
Silvia Attolino
CMClaudio Macaluso
Claudio Macaluso
The production of 3D printed safety protection devices (SPD) requires particular attention to the material selection and to the evaluation of mechanical resistance, biological safety and surface roughness related to the accumulation of bacteria and viruses. We explored the possibility to adopt additive manufacturing technologies for the production of respirator masks, responding to the sudden demand of SPDs caused by the emergency scenario of the pandemic spread of SARS-COV-2. In this study, we developed different prototypes of masks, exclusively applying basic additive manufacturing technologies like fused deposition modeling (FDM) and droplet-based precision extrusion deposition (db-PED) to common food packaging materials. We analyzed the resulting mechanical characteristics, biological safety (cell adhesion and viability), surface roughness and resistance to dissolution, before and after the cleaning and disinfection phases. We showed that masks 3D printed with home-grade printing equipment have similar performances compared to the industrial-grade ones, and furthermore we obtained a perfect face fit by customizing their shape. Finally, we developed novel approaches to the additive manufacturing post-processing phases essential to assure human safety in the production of 3D printed custom medical devices.

4 December 2018 in Procedia Structural Integrity
Verified
Journal Article
Open access
PDF file
LBLorenzo Bergonzi
Lorenzo Bergonzi
MVMatteo Vettori
Matteo Vettori
APAlessandro Pirondi
Alessandro Pirondi
FMFabrizio Moroni
Fabrizio Moroni
FMFrancesco Musiari
Francesco Musiari
Material testing is a fundamental activity for the characterization of materials mechanical properties and for the certification of product quality. With concepts such as Smart Factories and Industry 4.0 coming to the fore, testing and measurement is moving away from laboratories and closer to the production floor: MaCh 3D is a miniaturized tensile testing machine developed for products and materials certification directly on the production site. The heart of the technology is the specimen with non-conventional geometry for tensile tests developed so as to be easily installed on the machine. The objective of this work is to illustrate the process of determining the geometry of specimen and fixtures by numerical analysis and their experimental validation, comparing the results with those obtained from specimens according to ASTM D638 standard, ASTM International, (1999).

6 December 2019 in Acta Polytechnica CTU Proceedings
Verified
Journal Article
Open access
PDF file
Mattia FrascioMattia Frascio
Mattia Frascio
LBLorenzo Bergonzi
Lorenzo Bergonzi
MJMichal Jilich
Michal Jilich
FMFabrizio Moroni
Fabrizio Moroni
MAMassimiliano Avalle
Massimiliano Avalle
MVMatteo Vettori
Matteo Vettori
The work illustrates how building parameters of the Additive Manufacturing process Fused Filament Fabrication can affect not only the mechanical properties but also the surface wettability and morphology. Wettability and morphology are relevant factors in bonded joints performance. Advantages of polymeric additive manufacturing are to allow a re-design of components with locally controlled properties and integrated functions. Major limitations are related to the lack of material testing standardization and constraints due to the build volume and to the object orientation for printability: the latter problem scan be addressed with the use of bonded joints that allow to create bigger assemblies from smaller parts optimally designed to take advantage of material orthotropy and without the structural drawbacks. In this study, two materials are considered, acrylonitrile butadiene styrene and polylactideacid. Wettability, surface morphology and mechanical strength have been determined at different combinations of nozzle temperature, print speed and layer thickness.

1 February 2021 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
LBLorenzo Bergonzi
Lorenzo Bergonzi
MVM Vettori
M Vettori
FMF Moroni
F Moroni
FMF Musiari
F Musiari
APA Pirondi
A Pirondi
This work deals with the experimental validation of the proposed specimens geometries which design process through Finite Element Method was presented during AIAS 2019 and published afterwards [1]. In particular, non-conventional miniaturized specimen geometry compliant to ASTM E8 and ISO 6892, specifically developed to work with MaCh3D [2], an innovative miniaturized tensile testing machine, were considered. The size-reduction of specimens is advantageous both in terms of material and equipment: smaller specimens require lower forces to be broken, hence a compact tensile testing machine can perform the mechanical characterization activity. In this experimental validation, mechanical properties determined using the three proposed MaCh3D miniaturized specimens are compared to full-size ISO 6892 samples. Specimens were cut from AISI 304 stainless steel plates, with different thickness according to specimens requirements. Good accordance has been found between the standard and non-standard geometries.