We demonstrate a versatile femtosecond power amplifier using a Yb:YAG single crystal fiber operating from 10 kHz to 10 MHz. For a total pump power of 75 W, up to 30 W is generated from the double-pass power amplifier. At a repetition rate of 10 kHz, an output energy of 1 mJ is obtained after recompression. In this configuration, the pulse duration is 380 fs, corresponding to a peak power of 2.2 GW. The beam quality factor is better than 1.1 for investigated parameters.
We demonstrate an Yb:YAG single-crystal fiber laser with 251 W output power in continuous-wave and an optical efficiency of 44%. This performance can be explained by the high overlap between pump and signal beams brought by the pump guiding and by the good thermal management provided by the single-crystal fiber geometry. The oscillator performance with a reflectivity of the output coupler as low as 20% also shows high potential for power amplification.
4 April 2011 in Journal of the Optical Society of America B
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
We report on a high-power narrow-linewidth pulsed laser source emitting at a wavelength of 257 nm. The system is based on a master oscillator power amplifier architecture, with Yb-doped fiber preamplifiers, a Yb:YAG single crystal fiber power amplifier used to overcome the Brillouin limitation in glass fiber and nonlinear frequency conversion stages. This particularly versatile architecture allows the generation of Fourier transform-limited 15 ns pulses at 1030 nm with 22 W of average power and a diffraction-limited beam (). At a repetition rate of 30 kHz, 106 μJ UV pulses are generated corresponding to an average power of 3.2 W.