Eric Derlund Swain

Dr. Eric Derlund Swain

U.S. Geological Survey, Caribbean-Florida Water Science Center, Davie, FL 33314, USA

Research Focus & Metrics

Academic Career Length

37Years (1990-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2007
Verified
Report
Closed access
WSW. Barclay Shoemaker
W. Barclay Shoemaker
EKEve L. Kuniansky
Eve L. Kuniansky
SBSteffen Birk
Steffen Birk
SBSebastian Bauer
Sebastian Bauer
ESEric Derlund Swain
Eric Derlund Swain
This report documents the Conduit Flow Process (CFP) for the modular finite-difference ground-water flow model, MODFLOW-2005. The CFP has the ability to simulate turbulent ground-water flow conditions by: (1) coupling the traditional ground-water flow equation with formulations for a discrete network of cylindrical pipes (Mode 1), (2) inserting a high-conductivity flow layer that can switch between laminar and turbulent flow (Mode 2), or (3) simultaneously coupling a discrete pipe network while inserting a high-conductivity flow layer that can switch between laminar and turbulent flow (Mode 3). Conduit flow pipes (Mode 1) may represent dissolution or biological burrowing features in carbonate aquifers, voids in fractured rock, and (or) lava tubes in basaltic aquifers and can be fully or partially saturated under laminar or turbulent flow conditions. Preferential flow layers (Mode 2) may represent: (1) a porous media where turbulent flow is suspected to occur under the observed hydraulic gradients; (2) a single secondary porosity subsurface feature, such as a well-defined laterally extensive underground cave; or (3) a horizontal preferential flow layer consisting of many interconnected voids. In this second case, the input data are effective parameters, such as a very high hydraulic conductivity, representing multiple features. Data preparation is more complex for CFP Mode 1 (CFPM1) than for CFP Mode 2 (CFPM2). Specifically for CFPM1, conduit pipe locations, lengths, diameters, tortuosity, internal roughness, critical Reynolds numbers (NRe), and exchange conductances are required. CFPM1, however, solves the pipe network equations in a matrix that is independent of the porous media equation matrix, which may mitigate numerical instability associated with solution of dual flow components within the same matrix. CFPM2 requires less hydraulic information and knowledge about the specific location and hydraulic properties of conduits, and turbulent flow is approximated by modifying horizontal conductances assembled by the Block-Centered Flow (BCF), Layer-Property Flow (LPF), or Hydrogeologic-Unit Flow Packages (HUF) of MODFLOW-2005. For both conduit flow pipes (CFPM1) and preferential flow layers (CFPM2), critical Reynolds numbers are used to determine if flow is laminar or turbulent. Due to conservation of momentum, flow in a laminar state tends to remain laminar and flow in a turbulent state tends to remain turbulent. This delayed transition between laminar and turbulent flow is introduced in the CFP, which provides an additional benefit of facilitating convergence of the computer algorithm during iterations of transient simulations. Specifically, the user can specify a higher critical Reynolds number to determine when laminar flow within a pipe converts to turbulent flow, and a lower critical Reynolds number for determining when a pipe with turbulent flow switches to laminar flow. With CFPM1, the Hagen-Poiseuille equation is used for laminar flow conditions and the Darcy-Weisbach equation is applied to turbulent flow conditions. With CFPM2, turbulent flow is approximated by reducing the laminar hydraulic conductivity by a nonlinear function of the Reynolds number, once the critical head difference is exceeded. This adjustment approximates the reductions in mean velocity under turbulent ground-water flow conditions.

1 January 2020
Verified
Report
Closed access
PDF file
SHSaira Haider
Saira Haider
ESEric Derlund Swain
Eric Derlund Swain
JBJames Beerens
James Beerens
MPMatthew Petkewich
Matthew Petkewich
BMBryan McCloskey
Bryan McCloskey
HHHeather Henkel
Heather Henkel
The Everglades Depth Estimation Network (EDEN) is an integrated network of water-level gages, interpolation models that estimate daily water-level data at ungaged locations, and applications that generate derived hydrologic data across the freshwater part of the Greater Everglades landscape. Version 3 (V3) of the EDEN interpolation surface-water model is the most recent update, replacing the version 2 (V2) model released in 2011.The primary revision for the V3 model is the switch to the R programming language to create a more efficient and portable EDEN code relative to V2, without reliance on proprietary software. Using R, the interpolation script runs over 10 times faster and is more easily updated, for example, to accommodate changes in the gage network or to incorporate R software updates. Additional revisions made for the V3 model include updates to the interpolation model, the gage network, and groundwater-level estimations. The EDEN model domain in the Greater Everglades and Big Cypress National Preserve is divided into subdomains that are based on hydrologic boundaries. In the V3 model, the number of subdomains was increased from five to eight, which allows hydrologic boundaries, such as levees and canals, to be better represented in the interpolation scheme. Five pseudogages were added to constrain the water-level surface at subdomain boundaries. Changes made to the water-level gage network between the implementation of the V2 and V3 models are incorporated, and groundwater-level estimations are added, which are important information for hydrologic and ecological studies.Summary model performance statistics indicate similar accuracy in water-level surfaces generated by the V3 and V2 models, with a root mean square error of 4.78 centimeters for both interpolation models against independent water-level measurements. Providing stability and continuity for the EDEN user community, the V3 model closely replicates the V2 model, with a root mean square difference of 3.87 centimeters for interpolated surfaces from April 1, 2014, to March 31, 2018. The additional groundwater levels provide a realistic estimate of the saturated groundwater surface continuous with the surface-water surface for Water Conservation Areas 2A and 2B from 2000 to 2011. This continuous surface is a more accurate estimation of the spatial distribution of water in the hydrologic system than before, providing needed information for ecological studies in areas where depth to water table affects habitats. Development of the EDEN V3 model advances the tools available to scientists and resource managers for guiding large-scale field operations, describing hydrologic changes, and supporting biological and ecological assessments.

1 December 2017 in Journal of Water Resources Planning and Management
Verified
Journal Article
Closed access
ESEric Derlund Swain
Eric Derlund Swain
JGJulieta Gómez-Fragoso
Julieta Gómez-Fragoso
STSigfredo Torres-Gonzalez
Sigfredo Torres-Gonzalez
Lago Loíza reservoir in east-central Puerto Rico is one of the primary sources of public water supply for the San Juan metropolitan area. To evaluate and predict the Lago Loíza water budget, an artificial neural network (ANN) technique is trained to predict river inflows. A method is developed to combine ANN-predicted daily flows with ANN-predicted 30-day cumulative flows to improve flow estimates. The ANN application trains well for representing 2007–2012 and the drier 1994–1997 periods. Rainfall data downscaled from global circulation model (GCM) simulations are used to predict 2050–2055 conditions. Evapotranspiration is estimated with the Hargreaves equation using minimum and maximum air temperatures from the downscaled GCM data. These simulated 2050–2055 river flows are input to a water budget formulation for the Lago Loíza reservoir for comparison with 2007–2012. The ANN scenarios require far less computational effort than a numerical model application, yet produce results with sufficient accuracy to evaluate and compare hydrologic scenarios. This hydrologic tool will be useful for future evaluations of the Lago Loíza reservoir and water supply to the San Juan metropolitan area.

1 January 2007
Verified
Report
Closed access
JWJohn D. Wang
John D. Wang
ESEric Derlund Swain
Eric Derlund Swain
MWMelinda A. Wolfert
Melinda A. Wolfert
CLChristian D. Langevin
Christian D. Langevin
DJDawn E. James
Dawn E. James
PTPamela A. Telis
Pamela A. Telis


1 July 1990 in Journal of Irrigation and Drainage Engineering
Verified
Journal Article
Closed access
ESEric Derlund Swain
Eric Derlund Swain
DCDavid A. Chin
David A. Chin
A numerical model is developed to simulate unsteady flow in open‐channel networks. The model is an improvement over currently available network models in that the effects of hydraulic structures and leakage through the riverbed are incorporated. In addition, a matrix solution method is developed that takes advantage of the banded nature of network problems and, in some cases, reduces the solution time drastically. A method of reducing the bandwidth of the coefficient matrix is presented. Verification by comparison to other solution methods shows close agreement. The computation time using the banded matrix solution routine is compared to a commonly used method for reducing solution time to determine the conditions under which the banded matrix solution is faster. The model presented is useful in simulating gate‐operating rules, analyzing effective flood‐control measures, and comparing water‐delivery schemes over large distances where there is significant loss to leakage.