Research on urban heat mitigation has been growing in recent years with many of the studies focusing on green infrastructure (GI) as a strategy to mitigate the adverse effects of an urban heat island (UHI). This paper aims at presenting a review of the range of findings from GI research for urban heat mitigation through a review of scientific articles published during the years 2009–2020. This research includes a review of the different types of GI and its contribution for urban heat mitigation and human thermal comfort. In addition to analysing different mitigation strategies, numerical simulation tools that are commonly used are also reviewed. It is seen that ENVI-met is one of the modelling tools that is considered as a reliable to simulate different mitigation strategies and hence has been widely used in the recent past. Considering its popularity in urban microclimate studies, this article also provides a review of ENVI-met simulation results that were reported in the reviewed papers. It was observed that the majority of the research was conducted on a limited spatial scale and focused on temperature and human thermal comfort.

Ultrafiltration (UF) of whey is a major membrane based process in the dairy industry. However, commercialization of this application has been limited by membrane fouling, which has a detrimental influence on the permeation rate. There are a number of different chemical and physical cleaning methods currently used for cleaning a fouled membrane. It has been suggested that the cleaning frequency and the severity of such cleaning procedures control the membrane lifetime. The development of an optimal cleaning strategy should therefore have a direct implication on the process economics. Recently, the use of ultrasound has attracted considerable interest as an alternative approach to the conventional methods. In the present study, we have studied the ultrasonic cleaning of polysulfone ultrafiltration membranes fouled with dairy whey solutions. The effects of a number of cleaning process parameters have been examined in the presence of ultrasound and results compared with the conventional operation. Experiments were conducted using a small single sheet membrane unit that was immersed totally within an ultrasonic bath. Results show that ultrasonic cleaning improves the cleaning efficiency under all experimental conditions. The ultrasonic effect is more significant in the absence of surfactant, but is less influenced by temperature and transmembrane pressure. Our results suggest that the ultrasonic energy acts primarily by increasing the turbulence within the cleaning solution.

This study investigated the impacts of climate change on the urban heat island (UHI) and the number of very hot (maximum temperature >35°C) and very cold days (minimum temperature <5°C) in the central business district (CBD) of Melbourne city in Australia. A station located in Laverton (less urbanised area), which is 17 km southwest of Melbourne CBD, was selected as the reference station for the computation of UHI intensity in Melbourne CBD. Using daily minimum/maximum temperatures at the two stations, nocturnal/diurnal UHI intensities in Melbourne CBD were computed for the period 1952–2010. It was found that in Melbourne CBD, nocturnal UHI intensities show a clear rising trend over the period 1952–2010 unlike the diurnal UHI intensities. For the analysis of nocturnal UHI intensities in Melbourne CBD, under changing climate, for each calendar month statistical models based on the gene expression programming (GEP) technique were developed for downscaling general‐circulation model (GCM) outputs to monthly average minimum temperature at Melbourne CBD and Laverton. Using the outputs of HadCM3, GFDL2.0 and ECHAM5 pertaining to the A2 greenhouse gas emission scenario on the downscaling models, projections of monthly average minimum temperature were produced for the two stations over the period 2000–2099. In each season, at both stations, the ensemble average of monthly minimum temperature gradually increased over the period 2000–2099. The ensemble‐average UHI intensity in Melbourne CBD projected into the future was higher for all seasons in comparison to that of period 1952–1971. Downscaling models based on the GEP technique were developed for each calendar month for projecting the number of very hot days in November–March and very cold days in May–September in Melbourne CBD. It was found that, in the future, summer weather will spread to early autumn, and winter weather will move to early spring, in Melbourne CBD.