Despite their great improvements, reliability and availability of power electronic devices remain always a focus. In safety-critical equipment, where the occurrence of faults can generate catastrophic losses, health monitoring of most critical components is absolutely needed to avoid and prevent breakdowns. In this paper, a noninvasive health monitoring method is proposed. It is based on fuzzy logic and the neural network to estimate and predict the equivalent series resistance (ESR) and the capacitance (C) of capacitors and supercapacitors. This method, based on the neo-fuzzy neuron model, performs a real-time processing (time series prediction) of the measured device impedance and the degradation data provided by accelerated ageing tests. To prove the efficiency of the proposed method, two experiments were performed. The first one was dedicated to the estimation of the ESR and C for a set of 8 polymer film capacitors, while the second one was dedicated to the prediction of the ESR and C for a set of 18 supercapacitors. The obtained results showed that combining fuzzy logic and the neural network is an accurate approach for the health monitoring of capacitors and supercapacitors.

Prognostics and Health Management (commonly called PHM) is a field that focuses on the degradation mechanisms of systems in order to estimate their health status, anticipate their failure and optimize their maintenance. PHM uses methods, tools and algorithms for monitoring, anomaly detection, cause diagnosis, prognosis of the remaining useful life (RUL) and maintenance optimization. It allows for permanently monitoring the health of the system and provides operators and managers with relevant information to decide on actions to be taken to maintain the system in optimal operational conditions. This paper aims to present the emergence of the PHM thematically to describe the subjacent processes, particularly prognosis, how it supplies the different maintenance strategies and to explain the benefits that can be anticipated. More specifically, this paper establishes a state of the art in prognostic methods used today in the PHM strategy. In addition, this paper shows the multitude of possible prognostic approaches and the choice of one among them that will help to provide a framework for industrial companies.

Bearings are critical components extensively used in rotary machines, often being the leading cause of unexpected machine shutdowns. To mitigate system failures, it is crucial to implement effective maintenance strategies. This paper introduces a novel methodology for bearing prognostics, employing Wavelet Packet Decomposition (WPD) for data preprocessing, Sequential Backward Selection (SBS) for feature selection, and Adaptive Neuro-Fuzzy Inference System (ANFIS) networks for prognostic modeling. The proposed approach consists of two key steps. Firstly, the data undergoes preprocessing through Wavelet Packet Decomposition, enhancing the quality and extracting relevant features. Subsequently, the Remaining Useful Life (RUL) of the bearing is predicted using a degradation model. The accuracy of the proposed method is evaluated using a bearing life dataset obtained from a run-to-failure test (IMS dataset). The results demonstrate the remarkable capability of the ANFIS model to learn and accurately estimate the system’s RUL. By leveraging the combined power of WPD, SBS, and ANFIS, this methodology showcases its potential as an effective prognostic tool for bearing health assessment and proactive maintenance planning.

The well-known gear tooth defects such as root cracks and flank spalls have been widely investigated in previous studies to model their effects on the time varying mesh stiffness (TVMS) and consequently the dynamic response of motor-gearbox systems. Nevertheless, the effect of assembly errors such as the center distance and the eccentricity has been less considered in past works. Determining the signature of these errors on the system response can help for their early detection and diagnostic to avoid overloading and failure of gears. An original geometric-based method combined with the potential energy method is proposed in this paper to accurately model the effect of these assembly errors on the TVMS of mating spur gear pairs. This is achieved by updating the line of action equation (LOA) at each meshing step using the actual coordinates of gear centers and employing a contact detection algorithm (CDA) to determine the actual contact points coordinates. An electrical model of a three-phase induction machine was then coupled with a dynamic model of a one-stage spur gear system to simulate the effect of assembly errors on the electromechanical response of the motor-gearbox system. The simulation results showed that the center distance error induces a reduction in the TVMS magnitude and the contact ratio, whereas the eccentricity error causes a double modulation of the TVMS magnitude and frequency. In addition, the results showed that assembly errors can be detected and diagnosed by analyzing the system vibration and the motor phase-current.