We report a mode-locked Ti:sapphire femtosecond laser emitting pulses at a repetition rate. When operated with a spectrally integrated average power greater than , the associated femtosecond laser frequency comb contains modes, each with power exceeding . Spectral broadening in nonlinear microstructured fiber yields comb elements with individual powers greater than over of spectral bandwidth. The modes of the emitted comb are resolved and imaged with a simple grating spectrometer and digital camera. Combined with absorption spectroscopy of rubidium vapor, this approach permits identification of the mode index and measurement of the carrier envelope offset frequency of the comb.
The high power per mode of a recently developed 10 GHz femtosecond Ti:sapphire frequency comb permits nonlinear Doppler-free saturation spectroscopy in with a single mode of the comb. We use this access to the natural linewidth of the rubidium line to effectively stabilize the optical frequencies of the comb with an instability of in 1 s of averaging. The repetition rate is stabilized to a microwave reference leading to a stabilized and atomically referenced comb. The frequency stability of the 10 GHz comb is characterized using optical heterodyne with an independent self-referenced 1 GHz comb. In addition, we present alternative stabilization approaches for high repetition rate frequency combs and evaluate their expected stabilities.
An ultrafast time-domain spectroscopy system employing asynchronous optical sampling at a repetition rate of 10 GHz is presented. Two ultra-compact Ti:sapphire femtosecond ring lasers allow to achieve scan rates as high as 100 kHz for a 100 ps long time window and a time-delay resolution of 100 fs. The feasibility of this high-speed ASOPS system is evaluated by performing THz time domain spectroscopy on molecular gases where signal-to-noise ratios exceeding 30 dB for averaging times in the millisecond range have been obtained. In order to demonstrate the benefits of this system for ultrafast pump-probe spectroscopy we demonstrate the high-sensitivity detection of coherent acoustic phonons with dephasing times in the range of the 100 ps time window.
We have investigated passive mode-locking of Tm,Ho:YAG lasers with GaInAs- and GaSb-based semiconductor saturable absorber mirrors (SESAMs). With a GaInAs-based SESAM, stable dual-wavelength mode-locking operation was achieved at 2091 nm and 2097 nm, generating pulses with duration of 56.9 ps and a maximum output power of 285 mW. By using the GaSb-based SESAMs, we could generate mode-locked pulses as short as 21.3 ps at 2091 nm with a maximum output power of 63 mW. We attribute the shorter pulse duration obtained with the GaSb SESAMs to the ultrafast recovery time of the absorption and higher nonlinearity compared to standard GaInAs SESAMs.
We present a differential absorption lidar (DIAL) laser transmitter concept designed around a Nested Cavity Optical Parametric Oscillator (NesCOPO) based Master Oscillator Power Amplifier (MOPA). The spectral bands are located around 2051 nm for CO2 probing and 1982 nm for H216O and HD16O water vapor isotopes. This laser is aimed at being integrated into an airborne lidar, intended to demonstrate future spaceborne instrument characteristics: high-energy (several tens of mJ nanosecond pulses) and high optical frequency stability (less than a few hundreds of kHz long term drift). For integration and efficiency purposes, the proposed design is oriented toward the use of state-of-the-art high aperture periodically poled nonlinear materials. This approach is supported by numerical calculations and preliminary experimental validations, showing that it is possible to achieve energies in the 40–50 mJ range, reaching the requirement levels for spaceborne Integrated Path Differential Absorption (IPDA) measurements. We also propose a frequency referencing technique based on beat note measurement of the laser signal with a self-stabilized optical frequency comb, which is expected to enable frequency measurement precisions better than a few 100 kHz over tens of seconds integration time, and will then be used to feed the cavity locking of the NesCOPO.