Wearable energy harvesting is of practical interest for many years and for diverse applications, including development of self‐powered wireless sensors within garments for human health monitoring. Herein, a novel approach is reported to create wearable energy generators and sensors using nanostructured hybrid piezoelectric fibers and exploiting the enormous variety of textile architectures. It is found that high performance hybrid piezofiber is obtained using a barium titanate (BT) nanoparticle and poly(vinylidene fluoride) (PVDF) with a mass ratio of 1:10. These fibers are knitted to form a wearable energy generator that produced a maximum voltage output of 4 V and a power density 87 μW cm−3 which is 45 times higher than earlier reported for piezoelectric textiles. The wearable energy generator charged a 10 μF capacitor in 20 s which is four and six times faster than previously reported for PVDF/BT and PVDF energy generators, respectively. It also emerges that the established knitted energy harvester exhibits sensitivity of 6.3 times higher in compare with the piezofibers energy generator. A knee sleeve prototype based on a PVDF/BT wearable device for monitoring real‐time precise healthcare is demonstrated. The developed processing method is scalable for the fabrication of industrial quantities of smart textiles.
Today we associate wearable technologies with electronic devices and novel approaches for powering these devices are being enabled by the advent of new piezoelectric materials and novel fabrication strategies. Mechanical energy harvesters are needed for such diverse applications as self-powered wireless sensors, structural and human health monitoring systems, and cheaply harvesting energy from human movements. Herein, we demonstrate novel triaxial braided PVDF yarn harvesters that piezoelectrically convert tensile mechanical energy into electrical energy. Compressing or bending braided PVDF yarns generated a maximum output voltage of 380 mV and a power density of 29.62 μW cm−3 which is ∼1559% higher than previously reported for piezoelectric textiles. It is found that the developed triaxial energy generator exhibits significantly higher sensitivity by a factor of 4 compared with the PVDF energy generator. Unlike other piezoelectric harvesters, the triaxial braided PVDF yarn achieves tensile energy harvesting and shows extreme durability which enables cycling with up to 50% strain for thousands of cycles with no changes in its performance. The production process is compatible with industrial, large-scale textile manufacturing and can be used for a variety of potential applications such as wearable electronic systems and energy harvesters charged from everyday body movements.
The ubiquity of wearables, coupled with the increasing demand for power, presents a unique opportunity for fiber‐based mobile energy generator systems. However, no commercially available systems currently exist with typical problems including low energy efficiency; short cycle life; slow and expensive manufacturing; and stiff, heavy or bulky componentry that reduce wearer comfort and aesthetic appeal. Herein, a new method is demonstrated to create wearable energy generators and sensors using nanostructured hybrid polyvinylidene fluoride (PVDF)/reduced graphene oxide (rGO)/barium‐titanium oxide (BT) piezoelectric fibers and exploiting the enormous variety of textile architectures. Highly stretchable piezoelectric fibers based on coiled PVDF/rGO/BT fibers energy generator and sensor are developed. It is found that the coiled PVDF/ rGO/BT enables to stretch up to ≈100% strain that produces a peak voltage output of ≈1.3 V with a peak power density of 3 W Kg−1 which is 2.5 times higher than previously reported for piezoelectric textiles. An energy conversion efficiency of 22.5% is achieved for the coiled hybrid piezofiber energy generator. A prototype energy generator and sensors based on a hybrid piezofibers wearable device for energy harvesting and monitoring real time precise healthcare are demonstrated.