The use of composite, in particular, multilayer materials, is one way to decrease the specific quantity of metal in an item and to increase its service characteristics. To develop methods for the...
1 August 2012 in Russian Journal of Nondestructive Testing
The effect of uniaxial-tension stresses on the structure and physicomechanical properties of a two-layer Steel CT3-Steel 08X18H10T composite material that underwent preliminary rolling and steels...
14 October 2014 in Physics of Metals and Metallography
The existence of an extensive network of main pipelines, both already operating and being constructed, which are exploited under complex climatic conditions, specifies the need for the development of...
5 August 2015 in Physics of Metals and Metallography
We report on the studied influence of the applied normal and tangential stresses, as well as their combined effect on the structure, phase composition, and magnetic properties of three high-nitrogen...
1 December 2023 in Diagnostics, Resource and Mechanics of materials and structures
The paper proposes to supplement the monitoring of strain uniformity over the cross-section of extruded aluminum alloy bars, based on the macro- and microstructure in the central part, at ½ radius, and in the surface zone in several cross-sections along the length of press products, with microindentation of these sections. For this purpose, the microstructure, the loading diagram, and the pattern of the distribution of micromechanical properties across the cross-section of extruded bars made of the AD33 and D16 aluminum alloys are comparatively analyzed. These alloys differ in that in one alloy, AD33, the alloying elements strengthen the aluminum-based solid solution without forming independent phases, and in the other, D16, they form strengthening intermetallic compounds Al2CuMg. The microhardness of the AD33 alloy is ~55 HV 0.1, that of the D16 alloy being 120 HV 0.1. The alloys differ in the distribution of micromechanical properties over both the transverse and longitudinal sections of the extruded bars. It has been found that maximum homogeneity is characteristic of the central part of the rods made of both alloys. The microindentation data correlate with the changes in the microstructure and the results of assessing the distribution of microstrains in the crystal lattice of an aluminum-based solid solution over the cross-section of extruded products by EBSD using recrystallization maps. This makes it possible to recommend the microindentation method for assessing the distribution of strains over the cross-section of extruded aluminum alloy bars.
The problem of the development of in-line nondestructive testing of mechanical properties of heat-strengthened oil and gas steel pipes remains topical. In this work, the effect of heat treatment conditions represented by the quenching temperature (in the range of 765–980°C) and cooling rate from the quenching temperature (in the range of 500–720°C, after quenching in water) on the structure, hardness, and magnetic properties (coercive force, residual induction, maximum magnetic permittivity, and saturation magnetization) is studied for the widely used pipe steels of 22KhG2A, 30KhMA, and 32G2 brands. The magnetic parameters are measured both in a closed magnetic circuit and using the attached magnetic devices on model and full-scale samples. A possible application of the coercimetric method as an alternative for the durametric one is shown for continuous underheating testing for quenching and the tempering quality of the pipes made from the steels under study during fabrication.