Monocular vision is one of the most commonly used noncontact six-degrees-of-freedom (6-DOF) pose estimation methods. However, the large translational DOF measurement error along the optical axis of the camera is one of its main weaknesses, which greatly limits the measurement accuracy of monocular vision measurement. In this paper, we propose a novel monocular camera and 1D laser rangefinder (LRF) fusion strategy to overcome this weakness and design a remote and ultra-high precision cooperative targets 6-DOF pose estimation sensor. Our approach consists of two modules: (1) a feature fusion module that precisely fuses the initial pose estimated from the camera and the depth information obtained by the LRF. (2) An optimization module that optimizes pose and system parameters. The performance of our proposed 6-DOF pose estimation method is validated using simulations and real-world experiments. The experimental results show that our fusion strategy can accurately integrate the information of the camera and the LRF. Further optimization carried out on this basis effectively reduces the measurement error of monocular vision 6-DOF pose measurement. The experimental results obtained from a prototype show that its translational and rotational DOF measurement accuracy can reach up to 0.02 mm and 15″, respectively, at a distance of 10 m.

Attitude update rate is one of the important indicators of star sensor performance. In order to resolve the problem of the low attitude update rate of star sensors, this paper proposes a star sensor attitude update method based on star point correction of rolling shutter exposure. Based on the characteristics of the asynchronous exposure of the rolling shutter, recursive estimation of the motion attitude and the corrected star point information were combined to realize multiple updates of the attitude in a single frame of the star map. Simulation and experimental results proved that the proposed method could increase the attitude update rate of a star sensor by 15 times, up to 150 Hz.

Star identification plays a key role in spacecraft attitude measurement. Currently, most star identification algorithms tend to perform well only in a scene without noise and are highly sensitive to noise. To solve this problem, this paper proposes a star identification algorithm based on the maximum spanning tree (MST) index and multi-order continuous cycle angle (CCA) intended for the lost-in-space mode. In addition, a neighboring star selection method named dynamic eight-quadrant (DEQ) is developed. First, the DEQ method is used to select high-confidence neighboring stars for the main star. Then, the star image is regarded as a graph, and the Prim algorithm is employed to construct the MST pattern for each guide star, which is then combined with the K vector index to perform the main star candidate search. Finally, the Jackard similarity voting for the multi-order CCA of the main star is used to identify the main star, and the global neighboring star identification is conducted by the multi-order CCA of neighboring stars. The simulated and real star images test results show that compared with five mainstream algorithms, when the position noise is 1 pixel, the number of false stars is five, the magnitude noise is 0.5, and the identification accuracy of the proposed algorithm is higher than 98.5%. Therefore, the proposed algorithm has excellent anti-noise ability in comparison to other algorithms.