The thermally dewetted metal nano-islands have been actively investigated as cost-effective SERS-active substrates with a large area, good reproducibility and repeatability via simple fabrication process. However, the correlation between the dewetting temperature of metal film and SERS intensity hasn’t been systematically studied. In this work, taking Ag nano-islands (AgNIs) as an example, we reported a strategy to investigate the correlation between the dewetting temperature of metal film and SERS intensity. We described the morphology evolution of AgNIs on the SiO2 planar substrate in different temperatures and got the quantitative information in surface-limited diffusion process (SLDP) as a function of annealing temperature via classical mean-field nucleation theory. Those functions were further used in the simulation of electromagnetic field to obtain the correlation between the dewetting temperature of Ag film and theoretical analysis. In addition, Raman mapping was done on samples annealed at different temperatures, with R6G as an analyte, to accomplish the analysis of the correlation between the dewetting temperature of Ag film and SERS intensity, which is consistent with the theoretical analysis. For SLDP, we used the morphological characterization of five samples prepared by different annealing temperatures to successfully illustrate the change in SERS intensity with the temperature fluctuation, obtaining a small deviation between the experimental results and theoretic prediction.
We synthesized a carbon nanotube (CNT) loaded with silver nanoparticles (AgNPs) composite as an effective surface enhanced Raman scattering (SERS) substrate via a low-cost, simple citrate reduction method. The hybrid materials were confirmed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), ultraviolet-visible (UV-vis) spectrophotometer and Raman spectroscopy. Rhodamine 6G (R6G) was used as the probe analyte. The experimental results indicated that the detection concentration level was down to 10−14 M. Additionally, we discussed the uniformity by conducting SERS position mapping within an area of 5 μm × 5 μm; meanwhile, we performed time-course SERS mapping experiments to study the evaporation process of probe molecules of the prepared samples. Finally, we simulated the electromagnetic field distribution based on SEM images (obtained the ratio of surface area to the area of silver particles) by the finite difference time domain (FDTD) method.
A feasible way to synthesize a surface-enhanced Raman scattering (SERS) substrate has been developed, where Ag nanoparticles (AgNPs) of different size and morphology are assembled on the surface and sidewalls of the aligned carbon nanotube (CNT) arrays via magnetron sputtering and high-temperature annealing. Our results show that the optimized substrate is performed by annealing temperature at 450 °C for 30 min. The state of the obtained AgNPs makes a significant contribution to the high sensitivity of SERS to R6G molecules, and the substrate has an enhancement factor (EF) on the order of ~1010. Meanwhile, the Ag/CNT arrays keep a good reproducibility with the average RSD values being less than 0.01 for all major Raman peaks. The temporal stability of our substrates has been also appeared, which indicates that the Ag/CNT arrays can be used as stable substrates for the production of enhanced SERS signals for up to three months under ambient conditions.
A tapered fiber decorated by Ag nanoparticles is prepared as a surface-enhanced Raman scattering (SERS) substrate. There are two key parameters during the preparation process, the fiber cone angle and the density of decorated AgNPs on the fiber tip surface. Their theoretical analysis on the forming mechanism and the optimization process is studied in detail. The tapered fibers with angles from 0.5 to 30° are successfully prepared, with a chemical method in a small tube using a bending interface. AgNPs with different densities are decorated on the surface of the tapered fibers with an electrostatic adsorption method. The optimized tapered fiber SERS probe with an angle of 12° and AgNPs density of 26.67% provides the detection of Rhodamine 6G (R6G) with 10−10 mol/L.