The Atmospheric Infrared Sounder (AIRS) and its two companion microwave sounders, AMSU and HSB were launched into polar orbit onboard the NASA Aqua Satellite in May 2002. NASA required the sounding system to provide high-quality research data for climate studies and to meet NOAA's requirements for improving operational weather forecasting. The NOAA requirement translated into global retrieval of temperature and humidity profiles with accuracies approaching those of radiosondes. AIRS also provides new measurements of several greenhouse gases, such as CO2, CO, CH4, O3, SO2, and aerosols. The assimilation of AIRS data into operational weather forecasting has already demonstrated significant improvements in global forecast skill. At NOAA/NCEP, the improvement in the forecast skill achieved at 6 days is equivalent to gaining an extension of forecast capability of six hours. This improvement is quite significant when compared to other forecast improvements over the last decade. In addition to NCEP, ECM... Abstract The Atmospheric Infrared Sounder (AIRS) and its two companion microwave sounders, AMSU and HSB were launched into polar orbit onboard the NASA Aqua Satellite in May 2002. NASA required the sounding system to provide high-quality research data for climate studies and to meet NOAA's requirements for improving operational weather forecasting. The NOAA requirement translated into global retrieval of temperature and humidity profiles with accuracies approaching those of radiosondes. AIRS also provides new measurements of several greenhouse gases, such as CO2, CO, CH4, O3, SO2, and aerosols. The assimilation of AIRS data into operational weather forecasting has already demonstrated significant improvements in global forecast skill. At NOAA/NCEP, the improvement in the forecast skill achieved at 6 days is equivalent to gaining an extension of forecast capability of six hours. This improvement is quite significant when compared to other forecast improvements over the last decade. In addition to NCEP, ECM...

The assimilation of Atmospheric InfraRed Sounder, Advanced Microwave Sounding Unit-A, and Humidity Sounder for Brazil (AIRS/AMSU/HSB) data by Numerical Weather Prediction (NWP) centers is expected to result in improved forecasts. Specially tailored radiance and retrieval products derived from AIRS/AMSU/HSB data are being prepared for NWP centers. There are two types of products - thinned radiance data and full-resolution retrieval products of atmospheric and surface parameters. The radiances are thinned because of limitations in communication bandwidth and computational resources at NWP centers. There are two types of thinning: (1) spatial and spectral thinning and (2) data compression using principal component analysis (PCA). PCA is also used for quality control and for deriving the retrieval first guess used in the AIRS processing software. Results show that PCA is effective in estimating and filtering instrument noise. The PCA regression retrievals show layer mean temperature (1 km in troposphere, 3 km in stratosphere) accuracies of better than 1 K in most atmospheric regions from simulated AIRS data. Moisture errors are generally less than 15% in 2-km layers, and ozone errors are near 10% over approximately 5-km layers from simulation. The PCA and regression methodologies are described. The radiance products also include clear field-of-view (FOV) indicators. The residual cloud amount, based on simulated data, for FOVs estimated to be clear (free of clouds) is about 0.5% over ocean and 2.5% over land.

The Advanced Microwave Sounding Unit-A (AMSU-A) is the first of a new generation of polar-orbiting cross-track microwave sounders operated by the National Oceanic and Atmospheric Administration. A feature of a cross-track sounder is that the measurements vary with scan angle because of the change in the optical pathlength between the earth and the satellite. This feature is called the limb effect and can be as much as 30 K. One approach to this problem is to limb adjust the measurements to a fixed view angle. This approach was used for the older series of Microwave Sounding Units. Limb adjusting is important for climate applications and regression retrieval algorithms. This paper describes and evaluates several limb adjustment procedures. The recommended procedure uses a combined physical and statistical technique. The limb adjusted measurements were compared with computed radiances from radiosondes and National Centers for Environmental Prediction models. The model error was found to be less tha... Abstract The Advanced Microwave Sounding Unit-A (AMSU-A) is the first of a new generation of polar-orbiting cross-track microwave sounders operated by the National Oceanic and Atmospheric Administration. A feature of a cross-track sounder is that the measurements vary with scan angle because of the change in the optical pathlength between the earth and the satellite. This feature is called the limb effect and can be as much as 30 K. One approach to this problem is to limb adjust the measurements to a fixed view angle. This approach was used for the older series of Microwave Sounding Units. Limb adjusting is important for climate applications and regression retrieval algorithms. This paper describes and evaluates several limb adjustment procedures. The recommended procedure uses a combined physical and statistical technique. The limb adjusted measurements were compared with computed radiances from radiosondes and National Centers for Environmental Prediction models. The model error was found to be less tha...

The Joint Polar Satellite System (JPSS) will launch its first JPSS-1 satellite in early 2017. The JPSS-1 and follow-on satellites will carry aboard an array of instruments including the Visible Infrared Imaging Radiometer Suite (VIIRS), the Cross-track Infrared Sounder (CrIS), the Advanced Technology Microwave Sounder (ATMS), and the Ozone Mapping and Profiler Suite (OMPS). These instruments are similar to the instruments currently operating on the Suomi National Polar-orbiting Partnership (S-NPP) satellite. In preparation for the JPSS-1 launch, the JPSS program at the Center for Satellite Applications and Research (JSTAR) Calibration/Validation (Cal/Val) teams, have laid out the Cal/Val plans to oversee JPSS-1 science products’ algorithm development efforts, verification and characterization of these algorithms during the pre-launch period, calibration and validation of the products during post-launch, and long-term science maintenance (LTSM). In addition, the team has developed the necessary schedules, deliverables and infrastructure for routing JPSS-1 science product algorithms for operational implementation. This paper presents an overview of these efforts. In addition, this paper will provide insight into the processes of both adapting S-NPP science products for JPSS-1 and performing upgrades for enterprise solutions, and will discuss Cal/Val processes and quality assurance procedures.