Jifeng Xu

Dr. Jifeng Xu


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 December 2019 in Materials
Verified
Journal Article
Open access
PDF file
RTRiming Tan
Riming Tan
JXJifeng Xu
Jifeng Xu
WSWei Sun
Wei Sun
ZLZhun Liu
Zhun Liu
ZGZhidong Guan
Zhidong Guan
XGXia Guo
Xia Guo
The effect of matrix cracking on the delamination morphology inside carbon fiber reinforced plastics (CFRP) laminates during low-velocity impact (LVI) is an open question. In this paper, the relationship between matrix cracking and delamination is studied by using cross-ply laminates. Several methods, including micrograph, C-scan, and visual inspection, were adopted to characterize the damage after LVI experiments. Based on the experimental results, finite element (FE) models were established to analyze the damage mechanisms. The matrix cracking was predicted by the extended finite element method (XFEM) and the Puck criteria, while the delamination was modeled by cohesive elements. It was revealed that the matrix crack in the bottom ply not only promoted the outward propagation of delamination but also contributed to the narrow delamination beneath the impact location. Multiple matrix cracks occurred in the middle ply. The ones close to the plate center initiated the delamination and prevented large-scale delamination beneath the impact location. For the cracks that were far away, no significant effect on delamination was found. In conclusion, the stress redistribution caused by the crack opening determines the delamination.

10 August 2021 in Aging
Verified
Journal Article
Open access
JXJifeng Xu
Jifeng Xu
YCYu Chen
Yu Chen
DYDongsheng Yu
Dongsheng Yu
LZLi Zhang
Li Zhang
XDXiaofan Dou
Xiaofan Dou
SZShuijun Zhang
Shuijun Zhang
Osteoporosis is a common aging-related disease diagnosed primarily using bone mineral density (BMD). Extracellular vesicles (EVs) remain unexplored in the context of osteoporosis. Towards this, EVs were isolated from plasma of a discovery cohort with 8 non-osteoporotic and 8 osteoporotic individuals, and nanoparticle tracking analysis (NTA) revealed a significantly higher EV concentration in osteoporotic individuals (P = 0.003). Moreover, EVs concentration showed a linear correlation with bone mineral density (BMD) values (linear correlation coefficient r = 0.9542, deviation from zero, p < 0.001). Results using a mouse model of osteoporosis confirmed that the number of EVs in mice from hindlimb unloading group was significantly higher than that from the age-matched control group (p = 0.015). TaqMan Real-Time PCR demonstrated that miR-335-5p, -320a, -483-5p, and miR-21-5p, were significantly higher expressed in osteoporotic patients compared with non-osteoporotic individuals. Quantitative real-time PCR shown that Wnt1, Wnt5a, Wnt7a, and Wnt9a mRNAs were lower expressed in osteoporosis derived EVs. In vitro functional assay indicated that osteoporosis derived EVs resulted in reduced mineralization in SaOS-2 cells. In conclusion, these results suggest that osteoporosis increased the secretion of EVs which carry higher expression of miRNAs and decreased expression of Wnt signals, further decreased the mineralization capacity in human osteoblasts.

12 November 2018 in Materials
Verified
Journal Article
Open access
PDF file
ZLZhun Liu
Zhun Liu
ZGZhidong Guan
Zhidong Guan
RTRiming Tan
Riming Tan
JXJifeng Xu
Jifeng Xu
XLXing Li
Xing Li
A multiscale analysis strategy with physical modified-micromechanics of failure (MMF3) criterion was proposed to analyze the failure behaviors of carbon fiber reinforced plastic (CFRP) laminates. The quantitative relationship between the macro- and micro- stresses was determined considering two typical fiber distributions. Thermal residual stress was taken into account in the stress transformation. The failures were defined and the properties of damaged elements were degraded at the constituent level. The back-calculation method based on the iteration algorithm was proposed to determine the micro strength with macro mechanical tests. A series of off-axis loading tests were conducted to verify the established multiscale models. The predicted strength was also compared with the results using micromechanics of failure (MMF) criterion to present accuracy improvements. Thermal residual stress was found to affect the strength by contributing to the matrix damage status. Meanwhile, sensitivity analysis was provided for the matrix-dominant micro strength to investigate its physical meaning. Results suggest that the micro tensile and compressive strength of the matrix influenced the off-axis tensile and compressive strengths respectively, with relative large off-axis angles, while the micro shear strength of the matrix dominated when the off-axis angles were relative small.

1 April 2017 in Journal of Engineering Mechanics
Verified
Journal Article
Closed access
KFKan Feng
Kan Feng
JXJifeng Xu
Jifeng Xu
A semianalytical method hybridizing hierarchical theory and finite-strip method (FSM) is developed to analyze buckling behavior of composite laminate shells in this paper. The Legendre orthogonal polynomial series are chosen as the hierarchical shape functions for the shell strips. The critical buckling loads and modes of cylinder shells with various radiuses subjected to axial loads are calculated by the proposed hierarchical finite-strip method (HFSM). The efficiency of HFSM is noted as the method combines the advantages of both hierarchical theory and FSM. The convergence and precision of HFSM are also demonstrated by several numerical examples.

27 February 2021 in Materials
Verified
Journal Article
Open access
PDF file
YWYao Wang
Yao Wang
XWXiaodong Wang
Xiaodong Wang
ZGZhidong Guan
Zhidong Guan
JXJifeng Xu
Jifeng Xu
XGXia Guo
Xia Guo
Z-pinned/bonded joints are great potential connection components that have been used in the 2D C/SiC composite structures; however, the hybrid joints present complex failure mechanism considering the secondary deposited SiC matrix in the clearance. Therefore, the mechanical performance and failure mechanism of the joints are investigated through experimental and numerical methods in this paper. Experiment results show that two peaks exist in the load–displacement curves. The first load peak is 2891–4172 N with the corresponding displacement of 0.10–0.15 mm, and the second load peak is 2670–2919 N with the corresponding displacement of 0.21–0.25 mm. Besides that, the secondary deposited SiC matrix exhibits discrete distribution, and it has significant effects on the failure mechanism. Validated by experimental data, the proposed three-dimensional numerical model based on modified Hashin’s criterion and fastener element can predict the mechanical performance and failure process. The numerical results indicate that the first load peak is dominated by the deposited SiC matrix near the edge, while the second peak is dominated by the z-pin and the SiC matrix near the z-pin. Moreover, the effects of the deposited SiC matrix’s strength and distribution are discussed, which is meaningful to the optimal design of C/SiC composite z-pinned/bonded hybrid single-lap joints.

28 January 2024 in Polymer Composites
Verified
Journal Article
Closed access
FZFa Zhang
Fa Zhang
TLTierang Liu
Tierang Liu
JCJian Chen
Jian Chen
MLMeina Liu
Meina Liu
YWYumin Wan
Yumin Wan
JXJifeng Xu
Jifeng Xu