(1) Background: Extracellular vesicles (EVs) are considered to be efficient nanocarriers for improved drug delivery and can be derived from mammalian or plant cells. Cucumber-derived EVs are not yet described in the literature. Therefore, the aim of this study was to produce and characterize cucumber-derived EVs and to investigate their suitability to improve the dermal penetration efficacy of a lipophilic active ingredient (AI) surrogate. (2) Methods: The EVs were obtained by classical EVs isolation methods and by high pressure homogenization (HPH). They were characterized regarding their physico-chemical and biopharmaceutical properties. (3) Results: Utilization of classical isolation and purification methods for EVs resulted in cucumber-derived EVs. Their dermal penetration efficacy for the AI surrogate was 2-fold higher when compared to a classical formulation and enabled a pronounced transdermal penetration into the viable dermis. HPH resulted in submicron sized particles composed of a mixture of disrupted plant cells. A successful isolation of pure EVs from this mixture was not possible with classical EVs isolation methods. The presence of EVs was, therefore, proven indirectly. For this, the lipophilic drug surrogate was admixed to the cucumber juice either prior to or after HPH. Admixing of the drug surrogate to the cucumber prior to the HPH resulted in a 1.5-fold increase in the dermal penetration efficacy, whereas the addition of the AI surrogate to the cucumber after HPH was not able to improve the penetration efficacy. (4) Conclusions: Results, therefore, indicate that HPH causes the formation of EVs in which AI can be incorporated. The formation of plant EVs by HPH was also indicated by zeta potential analysis.

(1) Background: The ex vivo porcine ear model is often used for the determination of the dermal penetration efficacy of chemical compounds. This study investigated the influence of the post-slaughter storage time of porcine ears on the dermal penetration efficacy of chemical compounds. (2) Methods: Six different formulations (curcumin and different fluorescent dyes in different vehicles and/or nanocarriers) were tested on ears that were (i) freshly obtained, (ii) stored for 24 or 48 h at 4 °C after slaughter before use and (iii) freshly frozen and defrosted 12 h before use. (3) Results: Results showed that porcine ears undergo post-mortem changes. The changes can be linked to rigor mortis and all other well-described phenomena that occur with carcasses after slaughter. The post-mortem changes modify the skin properties of the ears and affect the penetration efficacy. The onset of rigor mortis causes a decrease in the water-holding capacity of the ears, which leads to reduced penetration of chemical compounds. The water-holding capacity increases once the rigor is released and results in an increased penetration efficacy for chemical compounds. Despite different absolute penetration values, no differences in the ranking of penetration efficacies between the different formulations were observed between the differently aged ears. (4) Conclusions: All different types of ears can be regarded to be suitable for dermal penetration testing of chemical compounds. The transepidermal water loss (TEWL) and/or skin hydration of the ears were not correlated with the ex vivo penetration efficacy because both an impaired skin barrier and rigor mortis cause elevated skin hydration and TEWL values but an opposite penetration efficacy. Other additional values (for example, pH and/or autofluorescence of the skin) should, therefore, be used to select suitable and non-suitable skin areas for ex vivo penetration testing. Finally, data from this study confirmed that smartFilms and nanostructured lipid carriers (NLC) represent superior formulation strategies for efficient dermal and transdermal delivery of curcumin.

Poor aqueous solubility of active compounds is a major issue in today’s drug delivery. In this study the smartFilm-technology was exploited to improve the dermal penetration efficacy of a poorly soluble active compound (curcumin). Results were compared to the dermal penetration efficacy of curcumin from curcumin bulk suspensions and nanocrystals, respectively. The smartFilms enabled an effective dermal and transdermal penetration of curcumin, whereas curcumin bulk- and nanosuspensions were less efficient when the curcumin content was similar to the curcumin content in the smartFilms. Interestingly, it was found that increasing numbers of curcumin particles within the suspensions increased the passive dermal penetration of curcumin. The effect is caused by an aqueous meniscus that is created between particle and skin if the dispersion medium evaporates. The connecting liquid meniscus causes a local swelling of the stratum corneum and maintains a high local concentration gradient between drug particles and skin. Thus, leading to a high local passive dermal penetration of curcumin. The findings suggest a new dermal penetration mechanism for active compounds from nano-particulate drug delivery systems, which can be the base for the development of topical drug products with improved penetration efficacy in the future.

(1) Background: The study systematically investigated the influence of dispersed particles within a topical formulation on the dermal penetration efficacy of active compounds that are dissolved in the water phase of this formulation. The aim was to prove or disprove if particle-assisted dermal penetration can be used for improved dermal drug delivery. (2) Methods: Fluorescein was used as a surrogate for a hydrophilic active ingredient (AI). It was dissolved in the water phase of different formulations with and without particles. Two different types of particles (titanium dioxide and nanostructured lipid carriers (NLC)) were used. The influence of particle size and number of particles and the influence of skin hydrating excipients was also investigated. (3) Results demonstrate that the addition of particles can strongly increase the dermal penetration efficacy of AI. The effect depends on the size of the particles and the number of particles in the formulation, where smaller sizes and higher numbers resulted in higher penetration parameters. Formulations with NLC that contained 20% w/w or 40% w/w particles resulted in an about 2-fold higher amount of penetrated AI and increased the penetration depth about 2.5-fold. The penetration-enhancing effect was highly significant (p < 0.001) and allowed for an efficient delivery of the AI in the viable dermis. In contrast, the penetration-enhancing effect of excipients that increase the skin hydration was found to be very limited and not significant (≤5%, p > 0.05). (4) Conclusions: Based on the results, it can be concluded that particle-assisted dermal penetration can be considered to be a simple but highly efficient and industrially feasible formulation principle for improved and tailor-made dermal drug delivery of active compounds.

The influence of size, particle concentration and applied dose (finite vs. infinite dose) on the dermal penetration efficacy of curcumin was investigated in this study. For this, curcumin suspensions with different particle sizes (approx. 20 µm and approx. 250 nm) were produced in different concentrations (0.625–5% (w/w)). The dermal penetration efficacy was determined semi-quantitatively on the ex vivo porcine ear model. The results demonstrated that the presence of particles increases the dermal penetration efficacy of the active compounds being dissolved in the water phase of the formulation. The reason for this is the formation of an aqueous meniscus that develops between particles and skin due to the partial evaporation of water from the vehicle after topical application. The aqueous meniscus contains dissolved active ingredients, and therefore creates a small local spot with a locally high concentration gradient that leads to improved dermal penetration. The increase in penetration efficacy depends on the number of particles in the vehicle, i.e., higher numbers of particles and longer contact times lead to higher penetration efficacy. Therefore, nanocrystals with a high particle concentration were found to be the most suitable formulation principle for efficient and deep dermal penetration of poorly water-soluble active ingredients.

Dermal penetration is considered to mainly occur via passive diffusion. Therefore, a high concentration gradient of dissolved active ingredient between formulation and skin is needed to achieve an effective dermal penetration. The concentration gradient between formulation and skin can be changed by changing the amount of dissolved active ingredient in the formulation. In case of poorly soluble active ingredients this can be achieved by using nanosized drug material instead of larger sized material. The smaller size and the resulting larger surface increase the kinetic solubility and thus increase the concentration gradient of dissolved active ingredient between formulation and skin, which then results in an increased dermal penetration. In this study we demonstrated that the concentration gradient between formulation and skin can also be influenced by the number of particles being present in the formulation and by the dose (volume of formulation) applied to the skin. Particles of undissolved active ingredient are known to act as a reservoir by releasing dissolved molecules in the liquid phase of the formulation. It could now be demonstrated that the particles - once the liquid in which they are dispersed evaporates - can connect to the skin via an aqueous meniscus. The aqueous meniscus contains dissolved active ingredient and therefore creates a small local spot with a locally high concentration gradient and improved dermal penetration. Therefore, the dermal penetration can be increased with formulations that contain high amounts of particles. This can be achieved by applying formulations with high numbers of particles and/or by applying larger volumes of particle containing formulations to the skin.