The application of enhanced oil recovery (EOR) in offshore oil fields has received significant attention due to the potentially enormous amount of recoverable oil. However, EOR application offshore is in its very early stage due to conditions that are more complex than onshore oil fields, owing to the unique parameters present offshore. Therefore, successful EOR applications in offshore oil fields require different screening criteria than those for conventional onshore applications. A comprehensive database for onshore applications of EOR processes together with a limited offshore EOR application database are analyzed in this paper, and the important parameters for successful offshore application are incorporated into the new EOR screening criteria. In this paper, screening criteria to determine acceptable EOR processes for offshore fields, including hydrocarbon gas miscible, CO2 miscible, and polymer processes, are presented. Suggested screening criteria for these EOR processes comprise quantitative boundaries and qualitative considerations. Quantitative screening criteria are predominantly based on quantifiable data, such as oil and reservoir properties. Qualitative screening considerations mainly focus on the operational issues present offshore, including platform space constraints, limited disposal options, injectant availability, and flow assurance matters (including hydrate formation and difficulties in emulsion separation).
Enhanced Oil Recovery (EOR) has gained great attention as a result of higher oil prices and increasing oil demands. Extensive researches have been conducted to develop various EOR methods, evaluate their applicability and optimize operation conditions. One of the principal areas is to develop an effective tool for selection of a suitable EOR method according to oil field characteristics. The main objective of the studies is to screen various EOR methods based on field characteristics and evaluate their technical/economic applicability in an efficient way instead of predicting the field performances of all possible competing strategies and comparing their economics. In this paper, we present an Artificial Neural Network (ANN) approach to enable the petroleum engineer to select an appropriate EOR method with the given reservoir properties. The ANN developed in this study is a four-layered feed-forward Back Propagation (BP) network consisting of one input and output layer with two hidden layers. The input layer is composed of the key reservoir parameters (reservoir depth, temperature, porosity, permeability, initial oil saturation, oil gravity, and in-situ oil viscosity) while the output layer is composed of the five EOR methods to be evaluated (steam, CO2 miscible, hydrocarbon miscible, in-situ combustion, polymer flooding). The number of hidden layers and neurons are optimized during the training by repeated trial and error. After trained successfully, the ANN is tested and applied to other fields which are not used for the training. The noise test is also conducted to evaluate applicability of the model against the error included in the input. A series of the test results show that the ANN developed in this study can be used to select the most appropriate EOR process according to reservoir rock and fluid characteristics in a time and cost effective way.
Polymer flooding is now considered a technically- and commercially-proven method for enhanced oil recovery (EOR). The viscosity of the injected polymer solution is the key property for successful polymer flooding. Given that the viscosity of a polymer solution has a non-linear relationship with various influential parameters (molecular weight, degree of hydrolysis, polymer concentration, cation concentration of polymer solution, shear rate, temperature) and that measurement of viscosity based on these parameters is a time-consuming process, the range of solution samples and the measurement conditions need to be limited and precise. Viscosity estimation of the polymer solution is effective for these purposes. An artificial neural network (ANN) was applied to the viscosity estimation of FlopaamTM 3330S, FlopaamTM 3630S and AN-125 solutions, three commonly-used EOR polymers. The viscosities measured and estimated by ANN and the Carreau model using Lee’s correlation, the only method for estimating the viscosity of an EOR polymer solution in unmeasured conditions, were compared. Estimation accuracy was evaluated by the average absolute relative deviation, which has been widely used for accuracy evaluation of the results of ANN models. In all conditions, the accuracy of the ANN model is higher than that of the Carreau model using Lee’s correlation.
27 February 2019 in Journal of Geophysical Research: Solid Earth
The Korea Institute of Geoscience and Mineral Resources conducted depressurization experiments at various gas hydrate saturation conditions, using mini pressure cells, to determine critical gas hydrate saturation. Their results indicated that it is necessary to carry out a numerical simulation in connection with the experiments to determine the critical gas hydrate saturation at numerous conditions that could not be incorporated into the experiments. In this study, a numerical simulation model, which simulated a mini pressure cell, was developed to verify the results of the aforementioned experiments. The changes in the fluid density and computer tomography values showed a similar trend. The validated numerical simulation model was used to determine the dissociation behaviors and productivities for various gas hydrate saturation levels (10–80%). As the gas hydrate saturation increased, the fluid permeability decreased. The gas hydrate dissociation was slowed by this correlation, and the production of gas and water was delayed at 50–60% gas hydrate saturation. Thus, the critical gas hydrate saturation was determined to be 50–60% for the experimental conditions of the field production test at the Ulleung Basin, East Sea, Korea. A pressure difference was noticed between the production and injection points due to the pressure propagation being delayed at critical gas hydrate saturation. Verifying the results of the experiments proved useful to understanding the dissociation and multiphase flow patterns in various depressurization scenarios.