The relationship between the tendencies towards rigidity (measured by shear modulus, G) and hardness (measured by Vickers hardness, HV) of early transition metal (ETM)-based refractory high-entropy alloys (RHEA) and bond parameters (i.e., valence electron concentration (VEC), enthalpy of mixing (ΔH_mix)) was investigated. These bond parameters, VEC and ΔH_mix, are available from composition and tabulated data, respectively. Based on our own data (9 samples) and those available from the literatures (47 + 27 samples), it seems that for ETM-based RHEAs the G and HV characteristics have a close correlation with the bonding parameters. The room temperature value of G and HV increases with the VEC and with the negative value of ΔH_mix. Corresponding equations were deduced for the first time through multiple linear regression analysis, in order to help design the mechanical properties of ETM refractory high-entropy alloys.

A Mg₆₅Ni₂₀Cu₅Y₁₀ metallic glass was produced by melt spinning and was mixed with a 5 wt.% multiwall carbon nanotube additive in a high-energy ball mill. Subsequently, the composite mixture was exposed to high-pressure torsion deformation with different torsion numbers. Complimentary XRD and DSC experiments confirmed the exceptional structural and thermal stability of the amorphous phase against severe plastic deformation. Combined high-resolution transmission electron microscopy observations and fast Fourier transform analysis revealed deformation-induced Mg₂Ni nanocrystals, together with the structural and morphological stability of the nanotubes. The electrochemical hydrogen discharge capacity of the severely deformed pure metallic glass was substantially lower than that of samples with the nanotube additive for several cycles. It was also established that the most deformed sample containing nanotubes exhibited a drastic breakdown in the electrochemical capacity after eight cycles.