A seismic sequence that affected the Durrës region in late 2019 to early 2020 sheds new light on the structural architecture and active tectonic setting of the northern outer Albanides. Stress inversion analysis using focal mechanisms confirms that the area is dominated by ENE-trending horizontal maximum compression. The seismogenic sources consist mainly of ENE-dipping thrust faults roughly parallel to the coastline. The hypocentre distribution indicates that most of the earthquakes, including the M w 6.4 main shock, nucleated within the basement, with only some of the shallow aftershocks tending to cluster around the deeper portion of previously identified seismogenic structures within the sedimentary cover. Our results, unravelling for the first time the fundamental role of deeply rooted, crustal ramp-dominated thrusting in seismogenesis, imply a profound reconsideration of the seismotectonic setting of the region in terms of a correct assessment of seismic hazard in this densely populated area of Albania.
Some new results and preliminary remarks about the Plio–Quaternary structural and evolutionary characteristics of the outer Marche Apennines south in the Conero promontory are presented in this study. The present analysis is based on several subsurface seismic reflection profiles and well data, kindly provided by ENI S.p.A. and available on the VIDEPI list, together with surface geologic–stratigraphic knowledge of Plio–Quaternary evolution from the literature. Examples of negative vs. positive reactivation of inherited structures in fold and thrust belts are highlighted. Here, we present an example from the external domain of the Marche Apennines, which displays interesting reactivation examples from the subsurface geology explored. The study area shows significant evolutionary differences with respect to the northern sector of the Marche region previously investigated by the same research group. The areal distribution of the main structures changes north and south of the ENE–WSW oriented discontinuity close to the Conero promontory. Based on the old tripartite classification of the Pliocene, the results of this work suggest a strong differential subsidence with extension occurring during the Early Pliocene and principal compressive deformation starting from the Middle Pliocene and decreasing or ceasing during the Quaternary. The main structure in this area is the NNW–SSE Coastal Structure, which is composed of E-vergent shallow thrusts and high-angle deep-seated normal faults underneath. An important right-lateral strike–slip component along this feature is also suggested, which is compatible with the principal NNE–SSW shortening direction. As mentioned, the area is largely characterized by tectonic inversion. Starting from Middle Pliocene, most of the Early Pliocene normal faults became E-vergent thrusts.
Using an analytical methodology taking into account heat flow density data, frictional heating, temperature variations due to the re-equilibrated conductive state after thrusting and geological constrains, we calculated surface heat flow, geotherms and isotherms along a balanced and restored regional geological cross-section. Our results highlight the impact of frictional heating produced by thrusts on the thermal structure of the study area, leading to a raising of the isotherms both in the inner Albanides to the E and in the Adriatic sector offshore. Minimum values of in the surroundings of Tirana and the reconstructed 2D thermal structure suggest less favorable conditions for exploitation of geothermal energy, besides the direct use (Borehole Heat Exchanger-Geothermal Heat Pump systems). Nevertheless, the occurrence of the “Kruja geothermal zone”, partially overlapping this area and including hot spring manifestations, emphasize the structural control in driving hot fluids to the surface with respect to the regional thermal structure.
5 October 2023 in Journal of the Geological Society
We defined the seismotectonic setting of the external Marche Apennines (central Italy) by integrating geomorphological, structural and seismological data. The area is characterized by strong historical earthquakes, but the geometries and kinematics of the seismogenic sources have not previously been well defined. Plio-Quaternary Apennine compressional NW–SE structures are segmented by NE–SW-oriented transversal faults, the origin and role of which are still debated. We characterized the geometry, kinematics and activity of the four main transversal faults to better define their seismogenic potential. These high-angle, deeply rooted transversal fault systems have been mapped and separate the external Apennine sector into blocks and sub-blocks with different structural and evolutionary features. The integrated dataset showed that some inherited fault segments have recently been reactivated, displacing Quaternary deposits. The spatial distribution of seismicity indicates that some clusters of hypocentres are located within the basement. Stress field analysis using available focal mechanism solutions confirms the prevalence of left-lateral kinematics on roughly SW–NE-oriented structures. The transversal structures thus contribute to the longitudinal segmentation of the Apennine structures and, more generally, are involved in the northern part of the Adria plate kinematics towards the north and NNW. The assessment of seismic hazards and planning to mitigate risks in populated areas close to the Adriatic coast should consider these potentially active faults evidenced by instrumental seismicity and important historical earthquakes.
Fault geometries are usually reconstructed through seismic data, which can provide a very good image of the subsurface. However, the recognition of deep structures is often difficult for the shallow depth of these data and their low resolution in depth. On the contrary, recent earthquakes and their parameters (e.g. hypocentre, focal mechanism, magnitude, etc.) may have an important role in better understanding deep features, outlining the active crustal structures.November 26th 2019 a 6.4 Mw Durres earthquake struck the Albanian coastal area, claiming 51 victims and hundreds of injured people. This seismic sequence sheds new light into the structural architecture and active tectonic setting of the northern outer Albanides. Stress field analysis performed through local mechanisms of the main seismic events of the sequence and those recorded since 1997 by the Istituto Nazionale di Geofisica e Vulcanologia (INGV) confirm that the area is dominated by ENE trending, horizontal maximum compression, with a ENE dipping thrust faults roughly parallel to the coastline. Further analysis to investigate the structural architecture of this area was conducted plotting hypocentre distribution which show that shallower hypocentres tend to cluster around the deeper portion of projected fault segment proposed by the DISS ‘composite seismogenic source’ labelled ALCS002, whereas most of the seismic events including the Mw = 6.4 main shock are nucleated within the crystalline basement. This result unravels for the first time the fundamental role of deeply rooted, crustal ramp-dominated thrusting in seismogenesis, implying a profound reconsideration of the seismotectonic setting of the region.The outcomes of this study show here that the recent earthquakes are pivotal in outlining the active crustal frontal structure of the thrust belt, providing new fundamental constraints, not only on the active tectonic setting of the region, but also on the crustal architecture of the outer Albanides. In this regard, the identification of such deep seismogenic sources and the definition of their dimensional parameters may have major implications on the correct assessment of the seismic hazard, especially for this large and densely populated area of Albania. Furthermore, the evidence provided in this study for a deep seismogenic thrust system in a foreland basin setting may be of general interest in similar tectonic contexts worldwide, where deep structures are possibly unidentified, and may represent a weakness in seismic hazard assessment.
During the last millennium, several moderate to strong earthquakes occurred in the Umbria-Marche Apennines and Marche foredeep, making this region one of the most seismically active areas of Europe. Seismic activity is mainly clustered in the southern part of the region. Nevertheless, beside the presence of high magnitude historical earthquakes, the lack of significant instrumental seismicity (i.e. ML > 2.5 earthquakes) makes the northern sector of the study area as a prominent seismic gap. Such a northern area is highly challenging for the detection of active, often blind, faults that are essential to a reliable seismic hazard assessment of the region. To tackle this issue, we test an integrated methodological approach based on available geological information together with the analysis of high-resolution seismological data and stress inversion analysis. Furthermore, GIS-based morphotectonic analyses are also used to study the correlation between the identified structures and neotectonic processes. Topography analysis includes the creation of seven swath profiles (20 km in width) and of maximum, minimum, mean elevation and relief maps. River network analysis is carried out using river long profiles and transformed (𝝌) long profiles coupled with slope/area diagrams. The former allowed the location of knickpoints/knickzones, whereas the latter allowed the spatial distribution of the Ksn (normalized steepness) index to be obtained. Combined data from topography and river network mark the different neotectonic behaviour of the northern and southern sectors of the Umbria-Marche Apennines. In fact, the southward increase of (i) mean and minimum elevations, (ii) local relief, (iii) abundance of non-lithology controlled knickpoints, and (iv) Ksn values, suggest the presence of a locus of enhanced vertical motion (i.e., surface uplift) in the south. Here, the largest historical earthquakes and the strongest instrumental seismicity also occur, thus suggesting active tectonics is more intense in this area of stronger uplift.The results of our multidisciplinary analysis are consistent with evidence of along-strike segmentation of the fold and thrust belt where each sector is characterised by different active tectonic behaviour and thickness of Pliocene deposits. Boundaries of sectors roughly coincide with major transversal fault systems, segmenting the outer portion of the fold and thrust belt in the Marche foothills. Such transversal systems are accompanied by diffuse seismicity (< M= 5.5) and probably mark the loci of long-lived, deep-seated fault zones that exert a major control on the active tectonic behaviour of large crustal blocks also compartmentalizing the axial zone of the chain.