This paper presents a comparative of different active and semi-active suspension systems in order to research the improvement in ride comfort and handling stability compared with the equivalent passive systems. The two-degrees-of-freedom model (quarter-car model) is employed in the analysis of seven different active suspension control strategies: LQR-LQG, Robust design, Kalman filter, Skyhook damper, Pole-assignment, Neural network and Fuzzy logic. Computer simulations of the different active models and the equivalent passive systems are performed to obtain the vertical acceleration of the sprung mass and the vertical wheel load variation. The vertical acceleration of the sprung mass is processed to evaluate the ride comfort behaviour and the vertical wheel load variation is used to evaluate the handling stability of the different active suspension control systems.
The main objective of this work is to determine the limit of safe driving conditions by identifying the maximal friction coefficient in a real vehicle. The study will focus on finding a method to determine this limit before reaching the skid, which is valuable information in the context of traffic safety. Since it is not possible to measure the friction coefficient directly, it will be estimated using the appropriate tools in order to get the most accurate information. A real vehicle is instrumented to collect information of general kinematics and steering tie-rod forces. A real-time algorithm is developed to estimate forces and aligning torque in the tyres using an extended Kalman filter and neural networks techniques. The methodology is based on determining the aligning torque; this variable allows evaluation of the behaviour of the tyre. It transmits interesting information from the tyre–road contact and can be used to predict the maximal tyre grip and safety margin. The maximal grip coefficient is estimated according to a knowledge base, extracted from computer simulation of a high detailed three-dimensional model, using Adams® software. The proposed methodology is validated and applied to real driving conditions, in which maximal grip and safety margin are properly estimated.
A virtual test rig is presented using a three-dimensional model of the elasto-kinematic behaviour of a vehicle. A general approach is put forward to determine the three-dimensional position of the body and the main parameters which influence the handling of the vehicle. For the design process, the variable input data are the longitudinal and lateral acceleration and the curve radius, which are defined by the user as a design goal. For the optimisation process, once the vehicle has been built, the variable input data are the travel of the four struts and the steering wheel angle, which is obtained through monitoring the vehicle. The virtual test rig has been applied to a standard vehicle and the validity of the results has been proven.
18 May 2017 in SAE International Journal of Passenger Cars - Mechanical Systems
In recent times, electric vehicles (EV) are gaining a lot of attention as they run clean and are environment friendly. Recent advances in the applications of integrating control systems in automotive vehicles have made it practicable to accomplish improvement in vehicle's longitudinal and lateral dynamics. This paper deals with a brief overview of current state of art vehicle technologies like direct yaw moment control, traction control and side slip control of EV. There are various controller algorithms available in literature with different torque vectoring strategies. As EV can be precisely controlled because of quick in hub wheel motor response times, therefore various torque vectoring strategies can be comfortably used for enhancing vehicle dynamics. Moreover, by using four independent in-wheel motors, several types of motion controls can be performed. These motion controls are intensively researched by a comprehensive literature review with an aim to obtain desired vehicle handling characteristics.The motivation behind doing this study is to obtain a guideline for systematic development of control strategy. The control law development is discussed in three subsequent stages, namely, Supervisory control, Upper level control and Lower level control. The controller is to be designed and implemented for the torque management of the four independent electric traction motors of a FOX racing electric car.