3D printing technology (3DP) as additive manufacturing is an innovative design technology that can meet the individual nutritional and sensory needs of consumers. Therefore, the aim of this work was to apply 3DP in the production of a strawberry-based functional product with the addition of two hydrocolloids (corn and wheat starch) in three proportions (10, 15 and 20%) and to investigate the influence of 3DP process parameters on physico-chemical and textural properties, as well as the bioactive and antioxidant potential and microbiological stability, with(out) the addition of natural antimicrobial agents. Starch type had a significant effect on all tested bioactive compounds, as well as on starch content, except for total phenolic and hydroxycinnamic acid contents. Considering the content of bioactive compounds and antioxidant capacity, program 2 proved to be more suitable than program 1. All samples exhibited good textural properties, a high degree of stability and minimal geometric deviations. Regarding microbiological safety, no pathogenic bacteria were found in the 3DP samples during storage. The 3DP sample with added citral at a concentration of 75 mg L⁻¹ showed the best microbiological quality. Ultimately, 3DP can be successfully used for the production of new strawberry-based functional products.

This study presents the results of conventional aqueous (CE) and non-conventional ultrasound-assisted (UAE) extractions of polyphenolic compounds from lees extracts of red wine varieties (Merlot and Vranac). The effect of ultrasound extraction time (t, s), and amplitude (A,%) from a 400 W ultrasound processor with different ultrasonic probes diameters (Ds, mm) on the amount and profile of polyphenolic compounds in the obtained extracts was investigated and compared to CE. The optimal conditions resulting in maximum extraction of phenolic compounds were: Probe diameter of 22 mm, amplitude 90% and extraction time for Vranac wine lees 1500 s and for Merlot wine lees extraction time of 1361 s. UAE proved to be significantly more effective in enhancing the extraction capacity of trans-resveratrol glucoside (30.57% to 300%), trans-resveratrol (36.36% to 45.75%), quercetin (39.94% to 43.83%), kaempferol (65.13% to 72.73%), petunidin-3-glucoside (41.53% to 64.95%), malvidin-3-glucoside (47.63% to 89.17%), malvidin-3-(6-O-acetyl) glucoside (23.84% to 49.74%), and malvidin-3-(6-O-p-coumaroyl) glucoside (26.77% to 34.93%) as compared to CE. Ultrasound reduced the extraction time (2.5-fold) and showed an increase of antioxidant potential by 76.39% (DPPH) and 125.83% (FRAP) compared to CE.

Regardless of its highly valuable nutritive composition, goat's milk is less preferred by consumers due to its specific sensory characteristics that are very often regarded as undesirable. On the other hand, traditional medicinal plants from Lamiaceae family, due to their rich bioactive composition, especially polyphenols, and desirable aroma profile, can be used to enhance and improve bioactive and sensory properties of food. In the present study nutritively valuable beverages were produced by enrichment of goat's milk with medicinal plant extracts derived from the Lamiaceae family and stabilized by homogenization with high intensity ultrasound treatment. The impact of plant species (lemon balm, mint, lavender, rosemary and sage) and ultrasound treatment duration (5 or 10 min) on the physicochemical, bioactive and sensory characteristics of enriched beverages was evaluated. The addition of plant extracts to goat's milk significantly increased the concentration of bioactive components (rosmarinic acid, hydroxycinnamic acid derivatives and luteolin derivatives), in dependence of the added plant extract. The prolongation of the ultrasound homogenization markedly decreased the fat globule size and thus beneficially affected the product stability. Apart from the achieved bioactive enrichment and stability, the developed beverages exhibited significantly improved sensory properties in comparison to plain goat's milk, with the highest overall acceptability determined for samples enriched with mint and rosemary.

The aim of this study was to develop a new cocoa and carob based pastry filling and explore the influences of carob flour and carob gum on the rheological and textural properties, specifically (i) the effect of increasing the amount of carob flour and (ii) the effect of carob bean gum naturally present in the carob flour with seeds versus the commercially available carob bean gum. All samples analyzed in this study exhibited shear thinning behavior. The texture analysis revealed a significant (p < 0.01) increase in consistency and firmness in samples with higher amounts of carob flour added, while higher temperatures significantly (p < 0.01) decreased adhesiveness. When comparing naturally occurring and commercially available LBG (locust bean gum), it was concluded that lower concentrations (up to 0.45% w/w) of naturally occurring LBG work just as well at the same concentrations of commercially available LBG, but this effect cannot be confirmed for higher LBG concentrations, nor for rheological properties determined at higher temperatures (80 °C).

Due to the diversity of organic molecular structures present in sage extract, sage extract is a promising potential source of a cheap and effective biodegradable green corrosion inhibitor for tinplate in 3% NaCl solution, which was evaluated in this study. HHP proved to be a new and emerging technology for the useful extraction of polyphenols from sage as a functional ingredient from natural sources. Analysis of variance among all tested independent factors (ethanol concentration, HHP parameters and temperature) revealed significant differences (p < 0.05) in total polyphenol content as well as for rosmarinic acid as the major phenolic compound in sage extract, while extraction time had no effect (p ˃ 0.05). The optimum HHP conditions (600 MPa, 30% ethanol, 60 °C and 5 min) gave a maximum extraction yield of total polyphenols of 3811.84 mg/100 g. Sage-leaf extracts were found to be a mixture of phenolic acids, namely rosmarinic and salvianolic acid K, epicatechin and luteolin-7-O-glucuronide glycoside. The corrosion results show that the sage extract at a concentration of 0.6 g/L in 3% NaCl is an effective corrosion inhibitor (93%), forming a passivation layer of sage extract consisting of organic compounds such as polyphenols on the surface of tinplate.