Silica monoliths featuring either mesopores or flow-through macropores and mesopores in their skeleton are prepared by combining spinodal phase separation and sol-gel condensation. The macroporous network is first generated by phase separation in acidic medium in the presence of polyethyleneoxides while mesoporosity is engineered in a second step in alkaline medium, possibly in the presence of alkylammonium cations as surfactants. The mesoporous monoliths, also referred as aerogels, are obtained in the presence of alkylpolyethylene oxides in acidic medium without the use of supercritical drying. The impact of the experimental conditions on pore architecture of the monoliths regarding the shape, the ordering, the size and the connectivity of the mesopores is comprehensively discussed based on a critical appraisal of the different models used for textural analysis.
Chitosan-zeolite Na-X composite beads with open porosity and different zeolite contents were prepared by an encapsulation method. Preparation conditions had to be optimised in order to stabilize the zeolite network during the polysaccharide gelling process. Composites and pure reference components were characterized using X-ray diffraction (XRD); scanning electron microscopy (SEM); N2 adsorption–desorption; and thermogravimetric analysis (TG). Cu(II) sorption was investigated at pH 6. The choice of drying method used for the storage of the adsorbent severely affects the textural properties of the composite and the copper sorption effectiveness. The copper sorption capacity of chitosan hydrogel is about 190 mg·g−1. More than 70% of this capacity is retained when the polysaccharide is stored as an aerogel after supercrititcal CO2 drying, but nearly 90% of the capacity is lost after evaporative drying to a xerogel. Textural data and Cu(II) sorption data indicate that the properties of the zeolite-polysaccharide composites are not just the sum of the properties of the individual components. Whereas a chitosan coating impairs the accessibility of the microporosity of the zeolite; the presence of the zeolite improves the stability of the dispersion of chitosan upon supercritical drying and increases the affinity of the composites for Cu(II) cations. Chitosan-zeolite aerogels present Cu(II) sorption properties.
In this work, a layered silicate magadiite-Na (Mag) is hydrothermally synthesized and used to prepare organic thiourea-intercalated magadiite. It is organically modified by N-(2-methoxyphenyl)-N′-(2-methylphenyl)-thiourea (TMMe) and N-(2-methoxyphenyl)-N′-(2-methoxyphenyl)-thiourea (TMM) without preintercalation with a cationic surfactant. These materials are characterized by X-ray diffraction, infrared spectroscopy, and scanning electron microscopy. Due to the increment of basic centers attached to the pendant chains, the metal adsorption capacities of the final chelating materials are found to be higher than the precursor. The ability of these materials to remove Pb(II) from an aqueous solution is followed by a series of adsorption isotherms at a temperature of 25°C, pH 5 and pH 7. The kinetic parameters analyzed by the Lagergren and Ho and Mc Kay models give a good fit for a pseudo-second-order reaction for all systems. The adsorption isotherm data follow the Langmuir equation where parameters are calculated. Mag/TMM has a better lead(II) removal capacity (33.44 mg/g) at pH 5 than Mag/TMMe (19.9 mg/g) and Mag (9.91 mg/g) at pH 7.
Phosphatidylcholine isotropic mesophases are easily formed by membrane fusion in hydroalcoholic solution in the presence of condensating silica. The transformation of lamellar bilayers into a sponge phase proceeds with the increase of the concentration of ethanol until a monodispersed mesoporous silica with surface area 800 m2 g−1 can be formed by calcination. Natural impurities of lecithin favour the formation of the sponge phase.