Change of land use land cover (LULC) has been known globally as an essential driver of environmental change. Assessment of LULC change is the most precise method to comprehend the past land use, types of changes to be estimated, the forces and developments behind the changes. The aim of the study was to assess the temporal and spatial LULC dynamics of the past and to predict the future using Landsat images and LCM (Land Change Modeler) by considering the drivers of LULC dynamics. The research was conducted in Nashe watershed (Ethiopia) which is the main tributary of the Upper Blue Nile basin. The total watershed area is 94,578 ha. The Landsat imagery from 2019, 2005, and 1990 was used for evaluating and predicting the spatiotemporal distributions of LULC changes. The future LULC image prediction has been generated depending on the historical trends of LULC changes for the years 2035 and 2050. LCM integrated in TerrSet Geospatial Monitoring and Modeling System assimilated with MLP and CA-Markov chain have been used for monitoring, assessment of change, and future projections. Markov chain was used to generate transition probability matrices between LULC classes and cellular automata were used to predict the LULC map. Validation of the predicted LULC map of 2019 was conducted successfully with the actual LULC map. The validation accuracy was determined using the Kappa statistics and agreement/disagreement marks. The results of the historical LULC depicted that forest land, grass land, and range land are the most affected types of land use. The agricultural land in 1990 was 41,587.21 ha which increased to 57,868.95 ha in 2019 with an average growth rate of 39.15%. The forest land, range land, and grass land declined annually with rates of 48.38%, 19.58%, and 26.23%, respectively. The predicted LULC map shows that the forest cover will further degrade from 16.94% in 2019 to 8.07% in 2050, while agricultural land would be expanded to 69,021.20 ha and 69,264.44 ha in 2035 and 2050 from 57,868.95 ha in 2019. The findings of this investigation indicate an expected rapid change in LULC for the coming years. Converting the forest area, range land, and grass land into other land uses, especially to agricultural land, is the main LULC change in the future. Measures should be implemented to achieve rational use of agricultural land and the forest conversion needs to be well managed.

The rapid urbanization and changing climate patterns in Swat, Pakistan have increased the vulnerability of urban areas to flood events. Accurate assessment of flood risk is crucial for effective urban planning and disaster management. In current research study flood hazard index was developed using analytic hierarchy process (AHP) technique in combination with the geographical information system (GIS) environment in Swat, Pakistan. The study integrates various data sources, including topographic maps, land use/land cover information, rainfall data, and infrastructure data, to develop a comprehensive flood risk assessment model. The weights obtained from the AHP analysis are combined with geospatial data using a geographic information system (GIS) to generate flood risk maps. The flood hazard levels were categorized into five distinct classes: very low, low, moderate, high, and very high. Using the GIS-AHP approach, higher weights were assigned to rainfall, distance to river, elevation, and slope in comparison to NDVI, TWI, LULC, curvature, and soil type. The flood hazard map was then reclassified for each parameter. By overlaying these maps, it was determined that 5.6% of the total area is classified as very high flood risk, 52% as high risk, 39.3% as moderate risk, and 3.1% as low risk. The developed comprehensive flood risk assessment model in current study can identify high-risk areas, prioritize mitigation measures, and aid in effective urban planning and disaster management.

Land use land cover (LULC) change is the crucial driving force that affects the hydrological processes of a watershed. The changes of LULC have an important influence and are the main factor for monitoring the water balances. The assessment of LULC change is indispensable for sustainable development of land and water resources. Understanding the watershed responses to environmental changes and impacts of LULC classes on hydrological components is vigorous for planning water resources, land resource utilization, and hydrological balance sustaining. In this study, LULC effects on hydrological parameters of the Nashe watershed, Blue Nile River Basin are investigated. For this, historical and future LULC change scenarios in the Nashe watershed are implemented into a calibrated Soil and Water Assessment Tool (SWAT) model. Five LULC scenarios have been developed that represent baseline, current, and future periods corresponding to the map of 1990, 2005, 2019, 2035, and 2050. The predicted increase of agricultural and urban land by decreasing mainly forest land will lead till 2035 to an increase of 2.33% in surface runoff and a decline in ground water flow, lateral flow, and evapotranspiration. Between 2035 and 2050, a gradual increase of grass land and range land could mitigate the undesired tendency. The applied combination of LULC prognosis with process-based hydrologic modeling provide valuable data about the current and future understanding of variation in hydrological parameters and assist concerned bodies to improve land and water management in formulating approaches to minimize the conceivable increment of surface runoff.

Groundwater is a crucial source of water supply due to its continuous availability, reasonable natural quality, and being easily diverted directly to the poor community more cheaply and quickly. The West Arsi Zone residents remain surface water dependent due to traditional exploration of groundwater, which is a tedious approach in terms of resources and time. This study uses remote sensing data and geographic information system techniques to evaluate the groundwater potential of the study area. This technique is a fast, accurate, and feasible technique. Groundwater potential and recharge zone influencing parameters were derived from Operational Land Imager 8, digital elevation models, soil data, lithological data, and rainfall data. Borehole data were used for results validation. With spatial analysis tools, the parameters affecting groundwater potential (LULC, soil, lithology, rainfall, drainage density, lineament density, slope, and elevation) were mapped and organized. The weight of the parameters according to percent of influence on groundwater potential and recharge was determined by Analytical Hierarchy Process according to their relative influence. For weights allocated to each parameter, the consistency ratio obtained was 0.033, which is less than 0.1, showing the weight allocated to each parameter is acceptable. In the weighted overlay analysis, from a percent influence point of view, slope, land use/cover, and lithology are equally important and account for 24% each, while the soil group has the lowest percent of influence, which accounts only 2% according to this study. The generated groundwater potential map has four ranks, 2, 3, 4, and 5, in which its classes are Low, Moderate, High, and Very High, respectively, based on its groundwater potential availability rank and class. The area coverage is 9825.84 ha (0.79%), 440,726.49 ha (35.46%), 761,438.61 ha (61.27%), and 30,748.68 ha (2.47%) of the study area, respectively. Accordingly, the western part of district is expected to have very high groundwater potential. High groundwater potential is concentrated in the central and western parts whereas moderate groundwater potential distribution is dominant in the eastern part of the area. The validation result of 87.61% confirms the very good agreement among the groundwater record data and groundwater potential classes delineated.

Sediment yield estimation along with identification of soil erosion mechanisms is essential for developing sophisticated management approaches, assessing, and balancing different management scenarios and prioritizing better soil and water conservation planning and management. At the watershed scale, land management practices are commonly utilized to minimize sediment loads. The goal of this research was to estimate sediment yield and prioritize the spatial dispersion of sediment-producing hotspot areas in the Nashe catchment using the Soil and Water Assessment Tool (SWAT). Moreover, to reduce catchment sediment output, this study also aims to assess the effectiveness of certain management practices. For calibration and validation of the model, monthly stream flow and sediment data were utilized. The model performance indicators show good agreement between measured and simulated stream flow and sediment yields. The study examined four best management practice (BMP) scenarios for the catchment’s designated sub-watersheds: S0 (baseline scenario), S1 (filter strip), S2 (stone/soil bunds), S3 (contouring), and S4 (terracing). According to the SWAT model result, the watershed’s mean yearly sediment output was 25.96 t/ha. yr. under baseline circumstances. The model also revealed areas producing the maximum sediment quantities indicating the model’s effectiveness for implementing and evaluating the sensitivity of sediment yield to various management strategies. At the watershed scale, treating the watershed with various management scenarios S1, S2, S3, and S4 decreased average annual sediment yield by 34.88%, 57.98%, 39.55%, and 54.77%, respectively. The implementations of the soil/stone bund and terracing scenarios resulted in the maximum sediment yield reduction. The findings of this study will help policymakers to make better and well-informed decisions regarding suitable land use activities and best management strategies.

Polycyclic aromatic hydrocarbons (PAHs), due to their mutagenic, carcinogenic, and teratogenic potential, can lead to numerous chronic and fatal diseases. PAHs have been found in several wastewater streams, including “produced water,” which is wastewater generated during the extraction of oil and gas. The PAHs’ removal from produced water using physical, chemical, biological, and combined methods is crucial. Water is a vital ecosystem component and is extremely vulnerable to PAHs. This article reviews the current PAH situation, including their physical and chemical properties, types, characteristics, and removal methods from produced water. The mechanism of each method of removal of PAHs has been discussed. The current study results show that adsorption by nanoparticles and integrated methods are promising methods to meet the strict authoritarian limit with advanced increase potential in the direction of commercialization for the removal of PAHs and provide opportunities to use produced water as a source of water. The current study results can help the policy/decision makers in the efficient management of water resources.