Electromagnetic systems have been used extensively for the control of magnetically actuated objects, such as in microrheology and micro- robotics research. Therefore, optimizing the design of such systems is highly desirable. Some of the features that are lacking in most cur- rent designs are compactness, portability, and versatility. Portability is especially relevant for biomedical applications in which in vivo or in vitro testing may be conducted in locations away from the laboratory microscope. This document describes the design, fabrication, and imple- mentation of a compact, low-cost, versatile, and user-friendly device (the ModMag) capable of controlling multiple electromagnetic setups, includ- ing a two-dimensional 4-coil configuration, a 3-dimensional Helmholtz configuration, a 2-dimensional magnetic tweezer configuration, and a piezoelectric transducer for producing acoustic waves. All electronics for powering the systems are contained in a compact 10″x6”x3” case, which includes a 10″ touchscreen. A graphical user interface provides additional ease of use. The system can also be controlled remotely, allowing for more flexibility and the ability to interface with other software running on the remote computer such as proprietary camera software. Aside from the software and circuitry, we also describe the design of the electromagnetic coil setups and provide examples of the use of the ModMag in experiments. • Low cost and portable magnetic micro-robot manipulation device • Compatible with the 3 most common coil configurations (traditional, Helmholtz, tweezer)
We have investigated the mobility of discoidal colloidal particles sedimenting within cholesteric finger textures formed by mixtures of the nematic liquid crystal 4-cyano-4′-pentylbiphenyl (5CB) and the chiral dopant 4-(2-methylbutyl)-4′-cyanobiphenyl (CB15) with cholesteric pitch p between 24 and 114 μm. The nickel disks, with radius 17 μm and thickness 300 nm, displayed varied transport behavior that depended on the size of the pitch and the orientation of the gravitational force with respect to the cholesteric axis. In textures with small pitch (p < 40 μm), the disks moved perpendicular to the axis irrespective of the orientation of gravity as a result of an elastic retarding force that prevented motion along the axis. In textures with larger pitch, the disks similarly moved perpendicular to the axis when the angle between the force and axis was large. When the angle was small, the disks displayed stick-slip motion caused by periodic yielding of the finger texture. A model considering viscous drag on the particles and the elastic energy cost of deforming the finger texture describes the stick-slip motion accurately. The effective drag viscosities obtained from the disk motion are anomalously large compared with those of pure nematic 5CB indicating a large contribution to the dissipation from the motion of disclinations in the texture in the vicinity of the translating disks.
3 August 2024 in Journal of Micro and Bio Robotics
The field of microrobotics has emerged as a promising area of research with significant applications in biomedicine, both in vitro and in vivo, such as targeted cargo delivery, microsurgery, and cellular manipulation. Microrobots actuated with multiple modalities have the potential for greater adaptability, robustness, and capability to perform various tasks. Modular units that can reconfigure into various shapes, create structures that may be difficult to fabricate as one whole unit, and be assembled on-site, could provide more versatility by assembly and disassembly of units on demand. Such multi-modal modular microrobots have the potential to address challenging applications. Here, we present a biocompatible cylindrical microrobot with a dome-shaped cavity. The microrobot is actuated by both magnetic and acoustic fields and forms modular microstructures of various shapes. We demonstrate the use of these microrobots for cellular manipulation by creating patterns on a surface.
Liquid–liquid or liquid–air interfaces provide interesting environments to study colloids and are ubiquitous in nature and industry, as well as relevant in applications involving emulsions and foams. They present a particularly intriguing environment for studying active particles which exhibit a host of phenomena not seen in passive systems. Active particles can also provide on‐demand controllability that greatly expands their use in future applications. However, research on active particles at interfaces is relatively rare compared to those at solid surfaces or in the bulk. Here, magnetically steerable active colloids at liquid–air interfaces that self‐propel by bubble production via the catalytic decomposition of chemical fuel in the liquid medium is presented. The bubble formation and dynamics of “patchy” colloids with a patch of catalytic coating on their surface is investigated and compared to more traditional Janus colloids with a hemispherical coating. The patchy colloids tend to produce smaller bubbles and undergo smoother motion which makes them beneficial for applications such as precise micro‐manipulation. This is demonstrated by manipulating and assembling patterns of passive spheres on a substrate as well as at an air–liquid interface. The propulsion and bubble formation of both the Janus and patchy colloids is characterized and it is found that previously proposed theories are insufficient to fully describe their motion and bubble bursting mechanism. Additionally, the colloids, which reside at the air–liquid interface, demonstrate novel interfacial positive gravitaxis towards the droplet edges which is attributed to a torque resulting from opposing downward and buoyant forces on the colloids.
Electromagnetic systems have been used extensively for the control magnetically actuated objects, such as in microrheology and microrobotics research. Therefore, optimizing the design of such systems is highly desired. Some of the features that are lacking in most current designs are compactness, portability, and versatility. Portability is especially relevant for biomedical applications in which in vivo or in vitro testing may be conducted in locations away from the laboratory microscope. This document describes the design, fabrication and implementation of a compact, low cost, versatile, and user friendly device (the ModMag) capable of controlling multiple electromagnetic setups, including a two-dimensional 4-coil traditional configuration, a 3-dimensional Helmholtz configuration, and a 3-dimensional magnetic tweezer configuration. All electronics and circuitry for powering the systems is contained in a compact 10"x6"x3" system which includes a 10" touchscreen. A graphical user interface provides additional ease of use. The system can also be controlled remotely, allowing for more flexibility and the ability to interface with other software running on the remote computer such as propriety camera software. Aside from the software and circuitry, we also describe the design of the electromagnetic coil setups and provide examples of the use of the ModMag in experiments.
Platinum-coated Janus colloids exhibit self-propelled motion in aqueous solution via the catalytic decomposition of hydrogen peroxide. Here, we report their motion in a uniformly aligned nematic phase of lyotropic chromonic liquid crystal, disodium cromoglycate (DSCG). When active Janus colloids are placed in DSCG, we find that the anisotropy of the liquid crystal imposes a strong sense of direction to their motion; the Janus colloids tend to move parallel to the nematic director. Motion analysis over a range of timescales reveals a crossover from ballistic to anomalous diffusive behavior on timescales below the relaxation time for liquid crystal elastic distortions. Surprisingly we observe that smaller particles roll during ballistic motion, whereas larger particles do not. This result highlights the complexity of phoretically-driven particle motion, especially in an anisotropic fluid environment.