Biomass has incredible potential as an alternative to fossil fuels for energy production that is sustainable for the future of humanity. Hydrogen evolution from photocatalytic biomass conversion not only produces valuable carbon-free energy in the form of molecular hydrogen but also provides an avenue of production for industrially relevant biomass products. This photocatalytic conversion can be realized with efficient, sustainable reaction materials (biomass) and inexhaustible sunlight as the only energy inputs. Reported herein is a general strategy and mechanism for photocatalytic hydrogen evolution from biomass and biomass-derived substrates (including ethanol, glycerol, formic acid, glucose, and polysaccharides). Recent advancements in the synthesis and fundamental physical/mechanistic studies of novel photocatalysts for hydrogen evolution from biomass conversion are summarized. Also summarized are recent advancements in hydrogen evolution efficiency regarding biomass and biomass-derived substrates. Special emphasis is given to methods that utilize unprocessed biomass as a substrate or synthetic photocatalyst material, as the development of such will incur greater benefits towards a sustainable route for the evolution of hydrogen and production of chemical feedstocks.

Vanadium-based catalysts have been used for several decades in ammonia-based selective catalytic reduction (NH₃-SCR) processes for reducing NO_x emissions from various stationary sources (power plants, chemical plants, incinerators, steel mills, etc.) and mobile sources (large ships, automobiles, etc.). Vanadium-based catalysts containing various vanadium species have a high NO_x reduction efficiency at temperatures of 350–400 °C, even if the vanadium species are added in small amounts. However, the strengthening of NO_x emission regulations has necessitated the development of catalysts with higher NO_x reduction efficiencies. Furthermore, there are several different requirements for the catalysts depending on the target industry and application. In general, the composition of SCR catalyst is determined by the components of the fuel and flue gas for a particular application. It is necessary to optimize the catalyst with regard to the reaction temperature, thermal and chemical durability, shape, and other relevant factors. This review comprehensively analyzes the properties that are required for SCR catalysts in different industries and the development strategies of high-performance and low-temperature vanadium-based catalysts. To analyze the recent research trends, the catalysts employed in power plants, incinerators, as well as cement and steel industries, that emit the highest amount of nitrogen oxides, are presented in detail along with their limitations. The recent developments in catalyst composition, structure, dispersion, and side reaction suppression technology to develop a high-efficiency catalyst are also summarized. As the composition of the vanadium-based catalyst depends mostly on the usage in stationary sources, various promoters and supports that improve the catalyst activity and suppress side reactions, along with the studies on the oxidation state of vanadium, are presented. Furthermore, the research trends related to the nano-dispersion of catalytically active materials using various supports, and controlling the side reactions using the structure of shaped catalysts are summarized. The review concludes with a discussion of the development direction and future prospects for high-efficiency SCR catalysts in different industrial fields.

Introducing amorphous and ultrathin nanosheets of transition bimetal phosphate arrays that are highly active in the oxygen evolution reaction (OER) as shells over an electronically modulated crystalline core with low hydrogen absorption energy for an excellent hydrogen evolution reaction (HER) can boost the sluggish kinetics of the OER and HER in alkaline electrolytes. Therefore, in this study, ultrathin and amorphous cobalt‐nickel‐phosphate (CoNiPO_x) nanosheet arrays are deposited over vanadium (V)‐doped cobalt‐nitride (V_3%‐Co₄N) crystalline core nanowires to obtain amorphous‐shell@crystalline‐core mesoporous 3D‐heterostructures (CoNiPO_x@V‐Co₄N/NF) as bifunctional electrocatalysts. The optimized electrocatalyst shows extremely low HER and OER overpotentials of 53 and 270 mV at 10 mA cm⁻², respectively. The CoNiPO_x@V_3%‐Co₄N/NF (+/−) electrolyzer utilizing the electrocatalyst as both anode and cathode demonstrates remarkable overall water‐splitting activity, requiring a cell potential of only 1.52 V at 10 mA cm⁻², 30 mV lower than that of the RuO₂/NF (+)/20%‐Pt/C/NF (−) electrolyzer. Such impressive bifunctional activities can be attributed to abundant active sites, adjusted electronic structure, lower charge‐transfer resistance, enhanced electrochemically active surface area (ECSA), and surface‐ and volume‐confined electrocatalysis resulting from the synergistic effects of the crystalline V_3%‐Co₄N core and amorphous CoNiPO_x shells boosting water splitting in alkaline media.

The interface engineering includes intricate procedures for the development of heterostructures and heterojunctions, modifying the composition at the interface, and optimizing the interfacial area to enhance H₂ catalytic performance.

Introducing complementary active materials in tandem as heterostructures of various shapes and sizes can significantly improve the physicochemical properties of the developed materials. Recently, the use of amorphous materials in conjunction with crystalline moieties as highly efficient electrocatalysts for water-splitting electrolyzers has surged rapidly. Excellent bifunctional activity for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) can be achieved from amorphous–crystalline-based materials owing to their remarkably conductive crystalline phase as well as their long-range disordered amorphous phase. In addition, the high specific surface area, disordered structure, and enhanced structural stability can accommodate various defects and strains that develop during in situ electrochemical reactions. Consequently, amorphous materials can be used as both surface-confined and volume-confined electrocatalysts. Although crystalline materials have better electronic properties as well as higher thermal and mechanical stability, they suffer from limited activity due to only surface-confined electrocatalysis. In this regard, the judicious integration of crystalline and amorphous active materials suitable for the OER and HER can tremendously enhance their bifunctional electrocatalytic activities owing to their synergistic effects. The variety in the choice of amorphous and crystalline counterparts presents ample opportunities for further exploration of the development of amorphous–crystalline heterostructured materials with unique properties. However, considering the recent massive developments in the understanding and protocols for fabricating such heterostructures, a critical review is vital for further advancement in this direction. Although some review papers have focused only on amorphous materials, including their synthesis methods, properties, and applications, no critical review that provides an overview emphasizing amorphous–crystalline heterostructures for electrocatalytic water-splitting applications has been published. In this regard, this review aims to present comprehensive details on the recent developments in the fabrication of different amorphous–crystalline heterostructures, the choice of the composition of each component, and the resulting physicochemical properties for the OER, HER, and overall water-splitting. It provides an in-depth understanding of amorphous–crystalline material synthesis protocols, their selection rationale, and their targeted physicochemical properties. This review also provides thought-provoking ideas and long-term perspectives for future research.

The seed-mediated method is a general procedure for the synthesis of gold nanorods (Au NRs), and reducing agents such as ascorbic acid (AA) and hydroquinone (HQ) are widely used for the growth process. Further, they are mild reducing agents; however, when AA is used, controlling the size of Au NRs with a higher aspect ratio (localized surface plasmon resonance (LSPR) peak, λ_Lmax > 900 nm) is challenging because it results in a faster growth rate of Au NRs. In contrast, when HQ is used, Au NRs with a higher aspect ratio can be synthesized as it slows down the growth rate of the Au NRs and greatly enhanced the λ_Lmax. However, the increase in λ_Lmax is still needs not satisfactory due to the limited enhancement in the aspect ratio of Au NRs due to utilization of single reducing agent. The growth kinetics of the Au NRs can be modulated by controlling the reducing power of the reducing agents. In such scenario, judicious use of two reducing agents such as AA and HQ simultaneously can help us to design Au NRs of higher aspect ratio in a controlled manner due to the optimum growth rate resulting from the combined effect of both the reducing agents. In this study, we investigated the effect of the two reducing agents by controlling the volume ratios. When the growth solution contains both the reducing agents, the growth of Au NRs is first initiated by the fast reduction of Au³⁺ to Au⁺ due to stronger reducing power of the AA and when the AA in the growth solution is completely utilized, further growth of the Au NRs continues as a result of the HQ thereby resulting to high aspect ratio Au NRs. Consequently, the LSPR peak (λ_Lmax > 1275 nm) can be tuned by controlling the volume ratios of the reducing agents.