Urban flooding has been an alarming issue in the past around the globe, particularly in South Asia. Pakistan is no exception from this situation where urban floods with associated damages are frequently occurring phenomena. In Pakistan, rapid urbanization is the key factor for urban flooding, which is not taken into account. This study aims to identify flood sensitivity and coping capacity while assessing urban flood resilience and move a step toward the initialization of resilience, specifically for Peshawar city and generally for other cities of Pakistan. To achieve this aim, an attempt has been made to propose an integrated approach named the “urban flood resilience model (UFResi-M),” which is based on geographical information system(GIS), remote sensing (RS), and the theory of analytical hierarchy process (AHP). The UFResi-M incorporates four main factors—urban flood hazard, exposure, susceptibility, and coping capacity into two parts, i.e., sensitivity and coping capacity. The first part consists of three factors—I_H, I_E, and I_S—that represent sensitivity, while the second part represents coping capacity (I_Cc). All four indicators were weighted through AHP to obtain product value for each indicator. The result showed that in the Westzone of the study area, the northwestern and central parts have very high resilience, whereas the southern and southwestern parts have very low resilience. Similarly, in the East zone of the study area, the northwest and southwest parts have very high resilience, while the northern and western parts have very low resilience. The likelihood of the proposed model was also determined using the receiver operating characteristic (ROC) curve method; the area under the curve acquired for the model was 0.904. The outcomes of these integrated assessments can help in tracking community performance and can provide a tool to decision makers to integrate the resilience aspect into urban flood management, urban development, and urban planning.

Floods are considered one of the world’s most overwhelming hydro meteorological disasters, which cause tremendous environmental and socioeconomic damages in a developing country such as Pakistan. In this study, we use a Geographic information system (GIS)-based multi-criteria approach to access detailed flood vulnerability in the District Shangla by incorporating the physical, socioeconomic vulnerabilities, and coping capacity. In the first step, 21 essential criteria were chosen under three vulnerability components. To support the analytical hierarchy process (AHP), the used criteria were transformed, weighted, and standardized into spatial thematic layers. Then a weighted overlay technique was used to build an individual map of vulnerability components. Finally, the integrated vulnerability map has been generated from the individual maps and spatial dimensions of vulnerability levels have been identified successfully. The results demonstrated that 25% of the western-middle area to the northern part of the study area comprises high to very high vulnerability because of the proximity to waterways, high precipitation, elevation, and other socioeconomic factors. Although, by integrating the coping capacity, the western-central and northern parts of the study area comprising from high to very high vulnerability. The coping capacities of the central and eastern areas are higher as compared to the northern and southern parts of the study area because of the numerous flood shelters and health complexes. A qualitative approach from the field validated the results of this study. This study’s outcomes would help disaster managers, decision makers, and local administration to quantify the spatial vulnerability of flood and establish successful mitigation plans and strategies for flood risk assessment in the study area.

Erlong Lake is considered one of the largest lakes in midwest Jilin, China, and one of the drinking water resources in neighboring cities. The present study aims to explore the usage of Landsat TM5, ETM7, and OLI8 images to assess water quality (V-phenol, dissolved oxygen (DO), NH₄-N, NO₃-N) in Erlong Lake, Jilin province, northeast China. Thirteen multispectral images were used in this study for May, July, August, and September in 2000, 2001, 2002, and October 2020. Radiometric and atmospheric corrections were applied to all images. All in situ water quality parameters were strongly correlated to each other, except DO. The in situ measurements (V-phenol, dissolved oxygen, NH₄-N, NO₃-N) were statistically correlated with various spectral band combinations (blue, green, red, and NIR) derived from Landsat imagery. Regression analysis reported that there are strong relationships between the estimated and retrieved water quality from the Landsat images. Moreover, in calibrations, the highest value of the coefficient of determination (R²) was ≥0.85 with (RMSE) = 0.038; the lowest value of R² was >0.30 with RMSE= 0.752. All generated models were validated in different statistical indices; R² was up to 0.95 for most cases, with RMSE ranging from 1.390 to 0.050. Finally, the empirical algorithms were successfully assessed (V-phenol, dissolved oxygen, NH₄-N, NO₃-N) in Erlong Lake, using Landsat images with very good accuracy. Both in situ and model retrieved results showed the same trends with non-significant differences. September of 2000, 2001, and 2002 and October of 2020 were selected to assess the spatial distributions of V-phenol, DO, NH₄-N, and NO₃-N in the lake. V-phenol, NH₄-N, and NO₃-N were reported low in shallow water but high in deep water, while DO was high in shallow water but low in deep water of the lake. Domestic sewage, agricultural, and urban industrial pollution are the most common sources of pollution in the Erlong Lake.

According to the European Union, buildings account for 40% of overall energy use and 36% of ${\mathrm{CO}}_2$ emissions, with existing energy-inefficient buildings the main source of losses. Efforts to enhance the thermal comfortability of users in buildings can result in overheating if not appropriately designed, which in turn could lead to health issues as well as continual emission of greenhouse gases. To provide further insights into this dilemma and contribute to improving energy-efficient building designs, we undertake a new modeling technique encompassing a complete analysis of the existing building 3D model as well as solar radiation behavior on buildings. The technique involves 3D building information modeling (3D BIM) that is reconstructed using computer-aided design (CAD). Ladybug and Honeybee plugins for Grasshopper for Rhino are then used to evaluate environmental and building performance using the energy plus weather (EPW) file of Wuhan city, China, as a case study. An assessment of ‘with’ and ‘without’ built architectural surroundings contexts is also carried out in relation to summer and winter solstices. An overall change of approximately 29.56% is observed between ‘with’ and ‘without’ surrounding contexts, which suggests that both have a significant influence on the solar potential of individual buildings. Investigation of internal and external thermal energy consumption behaviors in relation to building comfort lead us to suggest an optimized smart solution which is validated using our case study site in Wuhan. Our findings suggest that the building energy lifespan can be increased while reducing environmental consequences if an estimated 50% of monthly energy savings are made. The findings of this study provide useful insights for decision-makers, engineers, and designers of energy-efficient buildings.