In this paper, a randomly distributed plasmonic aluminum nanoparticle array is introduced on the top surface of conventional GaAs thin-film solar cells to improve sunlight harvesting. The performance of such photovoltaic structures is determined through monitoring the modification of its absorbance due to changing its structural parameters. A single Al nanoparticle array is integrated over the antireflective layer to boost the absorption spectra in both visible and near-infra-red regimes. Furthermore, the planar density of the plasmonic layer is presented as a crucial parameter in studying and investigating the performance of the solar cells. Then, we have introduced a double Al nanoparticle array as an imperfection from the regular uniform single array as it has different size particles and various spatial distributions. The comparison of performances was established using the enhancement percentage in the absorption. The findings illustrate that the structural parameters of the reported solar cell, especially the planar density of the plasmonic layer, have significant impacts on tuning solar energy harvesting. Additionally, increasing the plasmonic planar density enhances the absorption in the visible region. On the other hand, the absorption in the near-infrared regime becomes worse, and vice versa.

This paper investigates the absorption spectra of a plasmonic metamaterial absorber in the visible and near-infrared regimes by utilizing a metal-dielectric-metal (MDM) functional stack. A periodic metal-dielectric cap is introduced on top of a metallic substrate to excite surface plasmon modes. The shape of this cap and the glass coating modifies the absorbance bandwidth. Although the circular cap exhibits less broadening in the absorbance than the square one, the circular cap’s glass coating boosts the bandwidth’s expansion in the near-infrared region to about 1.65 µm. In the visible and near-infrared regimes, absorption bandwidth and spectral ratio can be tailored by modifying four distinct structural parameters. The finding shows that one can achieve an ultra-broad bandwidth that extends from 0.3 µm to 1.65 µm at 90% absorbance. The thickness of the top titanium layer, the silicon dioxide spacer thickness, the Ti-SiO₂ cap diameter, and the sliver substrate pitch are selected to be 20 nm, 60 nm, 215 nm, and 235 nm, respectively. Furthermore, the influence of using various metals on absorption spectra has been explored in the visible and near-infrared regimes. The d metals considered for the top layer are titanium, nickel, chromium, silver, copper, gold, aluminum, and gold.

In wireless communication systems, error control coding is necessary to provide reliable communications over fading channels. Turbo code is used practically in third generation due to good error correcting capability. However, it has error floor at high signal-to-noise ratio (SNR). Concatenation of another code as an outer code is an alternative to reduce turbo codepsilas error floor. In this paper, we study the behavior of a general packet radio service (GPRS) system, under different scenarios. We propose a method for reducing transmitter energy versus bit error rate and eliminating the error floor via a serial concatenation of low density parity check (LDPC) and turbo codes instead of the convolutional coded system. Moreover, computer simulations were conducted to compare the overall system performances obtained with turbo coding to the serial concatenation coded and channel non coded systems. The performance of the coding scheme is discussed in a Rayleigh fading channel with correlated and non correlated fading amplitudes and an additive white Gaussian noise (AWGN). Evaluation of the proposed encoder has shown a performance improvement over fading channels.