Hurricanes are a dominant disaster in the Caribbean, always causing serious power outages throughout the islands. Hurricane Maria was a prime example, causing unimaginable destruction of the power infrastructure of Puerto Rico (PR). Consequently, one month after the hurricane landfall, approximately 80% of the population was still without power. After an event of such massive destruction, the electric power restoration process progresses very slowly. This timeline can be improved using power outage (PO) forecast models that help identify the vulnerable places before the hurricane landfall. Generally, these models are trained with historical power outages records, associated data on weather conditions, and additional information about the natural and built environments. However, PO records are often difficult to acquire, and, in many instances, the power utility companies may not record them. This study utilizes a satellite-based Visible Infrared Imaging Radiometer Suite (VIIRS) night light data product as a surrogate for the power delivery to predict hurricane-induced PO in areas having limited to nonexistent historical data records. The processed satellite data is then used along with geographic variables, and simulated weather data to formulate machine learning-based algorithms to predict PO for future hurricane events. These models are applied and validated in the context of the PR catastrophic storm, Hurricane Maria.

Major new metropolitan centers experience challenges during management of peak electrical loads, typically occurring during extreme summer events. These peak loads expose the reliability of the electrical grid on the production and transmission side, while customers may incur considerable charges from increased metered peak demand, failing to meet demand response program obligations, or both. These challenges create a need for analytical tools that can inform building managers and utilities about near future conditions so they are better able to avoid peak demand charges and reduce building operational costs. In this article, we report on a tool and methodology to forecast peak loads at the city scale using New York City (NYC) as a test case. The city of New York experiences peak electric demand loads that reach up to 11 GW during the summertime, and are projected to increase to over 12 GW by 2025, as reported by the New York Independent System Operator (NYISO). The energy forecast is based on the Weather Research and Forecast (WRF) model version 3.5, coupled with a multilayer building energy model (BEM). Urban morphology parameters are assimilated from the New York Primary Land Use Tax-Lot Output (PLUTO), while the weather component of the model is initialized daily from the North American Mesoscale (NAM) model. A city-scale analysis is centered in the summer months of June–July 2015 which included an extreme heat event (i.e., heat wave). The 24-h city-scale weather and energy forecasts show good agreement with the archived data from both weather stations records and energy records by NYISO. This work also presents an exploration of space cooling savings from the use of white roofs as an application of the city-scale energy demand model.

Flooding during extreme weather events damages critical infrastructure, property, and threatens lives. Hurricane María devastated Puerto Rico (PR) on 20 September 2017. Sixty-four deaths were directly attributable to the flooding. This paper describes the development of a hydrologic model using the Gridded Surface Subsurface Hydrologic Analysis (GSSHA), capable of simulating flood depth and extent for the Añasco coastal flood plain in Western PR. The purpose of the study was to develop a numerical model to simulate flooding from extreme weather events and to evaluate the impacts on critical infrastructure and communities; Hurricane María is used as a case study. GSSHA was calibrated for Irma, a Category 3 hurricane, which struck the northeastern corner of the island on 7 September 2017, two weeks before Hurricane María. The upper Añasco watershed was calibrated using United States Geological Survey (USGS) stream discharge data. The model was validated using a storm of similar magnitude on 11–13 December 2007. Owing to the damage sustained by PR’s WSR-88D weather radar during Hurricane María, rainfall was estimated in this study using the Weather Research Forecast (WRF) model. Flooding in the coastal floodplain during Hurricane María was simulated using three methods: (1) Use of observed discharge hydrograph from the upper watershed as an inflow boundary condition for the coastal floodplain area, along with the WRF rainfall in the coastal flood plain; (2) Use of WRF rainfall to simulate runoff in the upper watershed and coastal flood plain; and (3) Similar to approach (2), except the use of bias-corrected WRF rainfall. Flooding results were compared with forty-two values of flood depth obtained during face-to-face interviews with residents of the affected communities. Impacts on critical infrastructure (water, electric, and public schools) were evaluated, assuming any structure exposed to 20 cm or more of flooding would sustain damage. Calibration equations were also used to improve flood depth estimates. Our model included the influence of storm surge, which we found to have a minimal effect on flood depths within the study area. Water infrastructure was more severely impacted by flooding than electrical infrastructure. From these findings, we conclude that the model developed in this study can be used with sufficient accuracy to identify infrastructure affected by future flooding events.

Buildings in major metropolitan centers face increased peak electrical load during the warm season, especially during extreme heat events. City-wide, the increased demand for space cooling can stress the grid, increasing generation costs. It is therefore imperative to better understand building energy consumption profiles at the city scale. This understanding is not only paramount for users to avoid peak demand charges but also for utilities to improve load management. This study aims to develop a city-scale energy demand forecasting tool using high resolution weather data interfaced with a single building energy model. The forecasting tool was tested in New York City (NYC) due to the availability of building morphology data. We identified 51 building archetypes, based on the building function (residential, educational, or office), the age of the building, and the land use type. The single building simulation software used is energyplus which was coupled to an urbanized weather research and forecasting (uWRF) model for weather forecast input. Individual buildings were linked to the archetypes and scaled using the building total floor area. The single building energy model is coupled to the weather model resulting in energy maps of the city. These maps provide an energy end-use profile for NYC for total and individual components including lighting, equipment and heating, ventilation, and air-conditioning (HVAC). The methodology was validated with single building energy data for a particular location, and with city-scale electric load archives, showing good agreements in both cases.