The paper focuses on the determination of fuel consumption (CO₂ emission) and exhaust emissions such as CO, HC, NO_x, and PM in the process of timber extraction and transport. A complex assessment of fuel consumption and exhaust emissions was performed for the entire, fully mechanized supply chain including, tree felling, delimbing, and bucking with a harvester, timber extraction with a forwarder and transport with a truck. The performed investigations determined unit exhaust emissions (referred to 1 m³ of timber) for the entire technological process and its individual stages. The investigations of the exhaust emissions and fuel consumption were performed under actual conditions of typical forest operations and transport. State-of-the-art portable emissions measurement system equipment was used for the measurements. The fuel consumption was determined through the carbon balance method. The investigations were performed for the process of extraction and transport of pulpwood. The measurements were performed on location in the town of Bębnikąt near Poznań, in a pinewood forest, typical of this part of Europe. The analysis includes the transport of timber to the lumberyard on a distance of 31.4 km. The total fuel consumption for the entire mechanized supply chain was 2.10 dm³/m³. The total exhaust emissions, however, amounted to: CO—8.91 g/m³, HC—1.19 g/m³, NO_x—45.32 g/m³, PM—4.04 g/m³.

Sustainable aviation fuels (SAFs) are currently considered a key element in the decarbonization of the aviation sector, offering a feasible solution to reduce life cycle greenhouse gas emissions without requiring fundamental changes in aircraft or infrastructure. This article provides a comprehensive overview of the current state of SAFs, including their classification, production technologies, economic aspects, and environmental performance. The analysis covers both currently certified SAF pathways, such as HEFA and FT-SPK, and emerging technologies like alcohol-to-jet and power-to-liquid, assessing their technological maturity, feedstock availability, and scalability. Economic challenges related to high production costs, investment risks, and policy dependencies are discussed, alongside potential mechanisms to support market deployment. Furthermore, the article reviews SAFs’ emission performance, including CO₂ and non-CO₂ effects, based on existing life cycle assessment (LCA) studies, with an emphasis on variability caused by feedstock type and production method. The findings highlight that, while SAFs can significantly reduce aviation-related emissions compared to fossil jet fuels, the magnitude of benefits depends strongly on supply chain design and sustainability criteria. There are various certified pathways for SAF production, as well as new technologies that can further contribute to the development of the industry. Properly selected biomass sources and production technologies can reduce greenhouse gas emissions by more than 70% compared to conventional fuels. The implementation of SAFs faces obstacles related to cost, infrastructure, and regulations, which hinder its widespread adoption. The study concludes that although SAFs represent a promising pathway for aviation climate mitigation, substantial scaling efforts, regulatory support, and continued technological innovation are essential to achieve their full potential.

Among the many publications on the environmental life cycle assessment (LCA) of transport, there are only a few examples of works dedicated to means of internal transport. For this reason, it was decided to gather energy-oriented inventory data and to assess the environmental impact related to the operation of selected forklift trucks, as the most commonly used means of internal transport. This paper presents the main assumptions and the results in relation to the four phases of LCA: the goal and scope definition, the life cycle inventory, the life cycle impact assessment results, and the interpretation. Ten forklifts with different engines were selected in order to carry out the life cycle assessment study. The research was based on the results of measuring the operating fuel consumption and exhaust gas emissions, conducted using the SEMTECH-DS mobile device from the PEMS group of devices. In order to make the measurements under a circumstance close to the real conditions of forklift exploitation, it was decided to slightly modify the operating cycle proposed in VDI 2198. The environmental impact of the fuel/electricity usage and exhaust gas emissions was assessed using the ISO 14040x guidelines and the IMPACT 2002+ method. The study showed that using an electric forklift to transport 1 t of payload over a distance of 1 km has a significantly smaller environmental impact than using one of the selected forklifts powered by an internal combustion engine. Using forklifts powered by liquefied petroleum gas (LPG) engines leads to a significantly higher environmental impact whilst the use of vehicles with diesel engines has an impact at a level several times lower. In a case of drives without load, where functional unit was defined as covering 1-km distance with no vehicle load, a lower impact for the electric vehicles was also obtained. The analysis includes the influences of the upstream processes of fuel and electrical energy production. Even when Poland’s production scenario (based almost entirely on fossil fuels) is taken into consideration, the electric forklifts still show a clear advantage. It should be expected that, if the technological mix of electrical energy production for countries with a higher share of renewable or nuclear energy were to be taken into account, the environmental indicators for electric vehicles would be even lower. It is worth noting that only the energy aspects of forklift operation were analysed. Further studies aiming to collect inventory data relating to other exploitation aspects, as well as the production and utilization of the same vehicles, are planned as a continuation of this research.

We have analyzed the increase of the overall efficiency of a spark ignition engine through energy recovery following the application of an automotive thermoelectric generator (ATEG) of our own design. The design of the generator was developed following emission investigations during vehicle driving under city traffic conditions. The measurement points were defined by actual operation conditions (engine speed and load), subsequently reproduced on an engine dynamometer. Both the vehicle used in the on-road tests and the engine dynamometer were fit with the same, downsized spark ignition engine (with high effective power-to-displacement ratio). The thermodynamic parameters of the exhaust gases (temperature and exhaust gas mass flow) were measured on the engine testbed, along with the fuel consumption and electric current generated by the thermoelectric modules. On this basis, the power of the ATEG and its impact on overall engine efficiency were determined.

MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry