Vilmos Simon

Prof. Dr. Vilmos Simon

orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 March 2009 in Journal of Mechanical Design
Verified
Journal Article
Closed access
PDF file
VSVilmos Simon
Vilmos Simon
A method for the determination of the optimal polynomial functions for the conduction of machine-tool setting variations in pinion teeth finishing in order to reduce the transmission errors in spiral bevel gears is presented. Polynomial functions of order up to 5 are applied to conduct the variation in the cradle radial setting and in the cutting ratio in the process for pinion teeth generation. Two cases were investigated: In the first case, the coefficients of the polynomial functions are constant throughout the whole generation process of one pinion tooth-surface; in the second case, the coefficients are different for the generation of the pinion tooth-surface on the two sides of the initial contact point. The obtained results have shown that by the use of two different fifth-order polynomial functions for the variation in the cradle radial setting for the generation of the pinion tooth-surface on the two sides of the initial contact point, the maximum transmission error can be reduced by 81%. By the use of the optimal modified roll, this reduction is 61%. The obtained results have also shown that by the optimal variation in the cradle radial setting, the influence of misalignments inherent in the spiral bevel gear pair and of the transmitted torque on the increase in transmission errors can be considerably reduced.

10 July 2008 in Journal of Mechanical Design
Verified
Journal Article
Closed access
PDF file
VSVilmos Simon
Vilmos Simon
The method for loaded tooth contact analysis is applied for the investigation of the combined influence of machine-tool settings for pinion teeth finishing and misalignments of the mating members on load distribution and transmission errors in mismatched spiral bevel gears. By using the corresponding computer program, the influence of pinion’s offset and axial adjustment error, angular position error of the pinion axis, tooth spacing error, and machine-tool setting correction for pinion teeth finishing, on tooth contact pressure, tooth root stresses, and angular displacement of the driven gear member from the theoretically exact position based on the ratio of the numbers of teeth is investigated. On the basis of the obtained results, the optimal combination of machine-tool settings is determined. By the use of this set of machine-tool settings, the maximum tooth contact pressure and transmission errors can be significantly reduced. However, in some cases, by the use of appropriate machine-tool settings for the reduction of tooth contact pressure, the angular displacement of the driven gear increases. Therefore, different optimized combinations of machine-tool settings for pinion tooth finishing for the reduction of the sensitivity of gears to misalignments in regard to maximum tooth contact pressure and transmission errors should be applied. By the use of the combination of machine-tool settings to reduce the sensitivity of gears to misalignments in regard to transmission errors, a slight reduction of maximal tooth contact pressure is achieved, too.

2 June 2014 in Journal of Mechanical Design
Verified
Journal Article
Closed access
PDF file
VSVilmos Simon
Vilmos Simon
In this study, an optimization methodology is proposed to systematically define the optimal head-cutter geometry and machine-tool settings to simultaneously minimize the tooth contact pressure and angular displacement error of the driven gear (the transmission error), and to reduce the sensitivity of face-hobbed spiral bevel gears to the misalignments. The proposed optimization procedure relies heavily on the loaded tooth contact analysis for the prediction of tooth contact pressure distribution and transmission errors influenced by the misalignments inherent in the gear pair. The load distribution and transmission error calculation method employed in this study were developed by the author of this paper. The targeted optimization problem is a nonlinear constrained optimization problem, belonging to the framework of nonlinear programming. In addition, the objective function and the constraints are not available analytically, but they are computable, i.e., they exist numerically through the loaded tooth contact analysis. For these reasons, a nonderivative method is selected to solve this particular optimization problem. That is the reason that the core algorithm of the proposed nonlinear programming procedure is based on a direct search method. The Hooke and Jeeves pattern search method is applied. The effectiveness of this optimization was demonstrated on a face-hobbed spiral bevel gear example. Drastic reductions in the maximum tooth contact pressure (62%) and in the transmission errors (70%) were obtained.

28 April 2014 in Journal of Mechanical Design
Verified
Journal Article
Closed access
PDF file
VSVilmos Simon
Vilmos Simon
In this study, an optimization methodology is proposed to systematically define the optimal tooth modifications introduced by head-cutter geometry and machine-tool settings to minimize the influence of misalignments on the elastohydrodynamic (EHD) lubrication characteristics in face-hobbed spiral bevel gears. The goal is to simultaneously maximize the EHD load-carrying capacity of the oil film and to minimize power losses in the oil film when different misalignments are inherent in the gear pair. The proposed optimization procedure relies heavily on the EHD lubrication analysis developed in this paper. The core algorithm of the proposed nonlinear programming procedure is based on a direct search method. Effectiveness of this optimization was demonstrated on a face-hobbed spiral bevel gear example. A drastic increase in the EHD load-carrying capacity of the oil film and a reduction in the power losses in the oil film were obtained.

17 May 2016 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
VSVilmos Simon
Vilmos Simon

26 March 2014 in Journal of Manufacturing Science and Engineering
Verified
Journal Article
Closed access
PDF file
VSVilmos Simon
Vilmos Simon
In this study, a method is proposed for the advanced manufacture of face-hobbed spiral bevel gears on CNC hypoid generators with optimized tooth surface geometry. An optimization methodology is applied to systematically define optimal head-cutter geometry and machine tool settings to introduce optimal tooth modifications. The goal of the optimization is to simultaneously minimize tooth contact pressures and angular displacement error of the driven gear (the transmission error). The optimization is based on machine tool setting variation on the cradle-type generator conducted by optimal polynomial functions. An algorithm is developed for the execution of motions on the CNC hypoid generator using the relations on the cradle-type machine. Effectiveness of the method was demonstrated by using a face-hobbed spiral bevel gear example. Significant reductions in the maximum tooth contact pressure and in the transmission errors were obtained.