The Sustainable Development Goals (SDGs) have been proposed to give a possible future to humankind. Due to the multidimensional characteristic of sustainability, SDGs need research activities with a multidisciplinary approach. This work aims to provide a critical review of the results concerning sustainable materials obtained by Italian researchers affiliated to the National Interuniversity Consortium of Materials Science and Technology (INSTM) and their contribution to reaching specific indicators of the 17 SDGs. Data were exposed by using the Web of Science (WoS) database. In the investigated period (from 2016 to 2020), 333 works about sustainable materials are found and grouped in one of the following categories: chemicals (33%), composites (11%), novel materials for pollutants sequestration (8%), bio-based and food-based materials (10%), materials for green building (8%), and materials for energy (29%). This review contributes to increasing the awareness of several of the issues concerning sustainable materials but also to encouraging the researchers to focus on SDGs’ interconnections. Indeed, the mapping of the achievements can be relevant to the decision-makers to identify the opportunities that materials can offer to achieve the final goals. In this frame, a “Sustainable Materials Partnership for SDGs” is envisaged for more suitable resource management in the future.

The carbonation of alkaline industrial wastes is a pressing issue that is aimed at reducing CO₂ emissions while promoting a circular economy. In this study, we explored the direct aqueous carbonation of steel slag and cement kiln dust in a newly developed pressurized reactor that operated at 15 bar. The goal was to identify the optimal reaction conditions and the most promising by-products that can be reused in their carbonated form, particularly in the construction industry. We proposed a novel, synergistic strategy for managing industrial waste and reducing the use of virgin raw materials among industries located in Lombardy, Italy, specifically Bergamo–Brescia. Our initial findings are highly promising, with argon oxygen decarburization (AOD) slag and black slag (sample 3) producing the best results (70 g CO₂/kg slag and 76 g CO₂/kg slag, respectively) compared with the other samples. Cement kiln dust (CKD) yielded 48 g CO₂/kg CKD. We showed that the high concentration of CaO in the waste facilitated carbonation, while the presence of Fe compounds in large amounts caused the material to be less soluble in water, affecting the homogeneity of the slurry.

Urban air pollution continues to represent a primary concern for human health, despite significant efforts by public authorities for mitigating its effects. Regulatory monitoring networks are essential tools for air pollution monitoring. However, they are sparse networks, unable to capture the spatial variability of the air pollutants. For addressing this issue, networks of low cost stations are deployed, supplementing the regulatory stations. Regarding this application, an important question is where these stations are installed The objective of this study was to generate a site suitability map for the development of a network of low cost multi-sensor stations across a city for a spatially dense urban air quality monitoring. To do that, a site suitability analysis was developed based on two geographical variables properly selected for representing the impact of urban pollutant sources and urban form on the pollutant concentrations. By processing information about emissions patterns and street canyon effects, we were able to identify air quality hotspot areas supposed to show high spatial variability. Low cost monitoring stations, there located, are able to provide that informative content, which is lacking for both regulatory monitoring networks and predictive modelling for high resolution air quality mapping.

The purpose of this research is to assess the yield and reaction rate potential of carbon dioxide (CO₂) sequestration through mineralisation using readily available and inexpensive resources by exploiting waste materials. In this case, a blend of four different kinds of ashes and combustion by-products were used, namely, coal fly ash (CFA), flue gas desulphurization (FGD) residues, municipal solid waste incineration fly ashes (MSWI FA) and bottom ash (MSWI BA), produced at the same location. To highlight the impact of these materials on the carbonation process, various factors were analysed, including particle size distribution, immediately soluble contents, mineralogy, particles’ detailed structure, and chemical composition. After preparing the samples, two carbonation processes were tested: natural carbonation and accelerated carbonation. To evaluate the impact of the water content on the reaction rate and yield of the mineral carbonation, various liquid-to-solid (L/S) ratios were used. The results demonstrate that the water content and pressure play a significant role in the CO₂ sequestration during the accelerated carbonation, the higher the L/S, the greater the yields, which can reach up to 152 g CO₂/kg with MSWI FA, while no substantial difference seems to emerge in the case of the natural carbonation.

Phosphate rocks are a critical resource for the European Union, and alternative sources to assure the future production of a new generation of fertilizers are to be assessed. In this study, a statistical approach, combined with a sustainability evaluation for the recovery of materials from waste containing phosphorus (P), is presented. This work proposes a strategy to recover P and silica (SiO₂) from rice husk poultry litter ash (RHPLA). The design of experiment (DoE) method was applied to maximize the P extraction using hydrochloric acid (HCl), with the aim to minimize the contamination that can occur by leachable heavy metals present in RHPLA, such as zinc (Zn). Two independent variables, the molar concentration of the acid, and the liquid-to-solid ratio (L/S) between the acid and RHPLA, were used in the experimental design to optimize the operating parameters. The statistical analysis showed that a HCl concentration of 0.34 mol/L and an L/S ratio of 50 are the best conditions to recover P with low Zn contamination. Concerning the SiO₂, its content in RHPLA is too low to consider the proposed recovery process as advantageous. However, based on our analysis, this process should be sustainable to recover SiO₂ when its content in the starting materials is more than 80%.