This article reports a thermal analysis of the wrists to analyze the behavior and recovery of skin temperature after 20 min when performing a highly repetitive movement, and two thermography methods (sensory and infrared) and research groups were compared. The tests were carried out with 44 participants who performed a repetitive task for 10 min and integrated into two groups, of which 22 were trained workers from a maquiladora company and were analyzed with sensory thermography, and the other 22 were in the laboratory with infrared thermography with undergraduate students. The study area is the left and right hand, specifically the wrists. The proposed hypothesis is that people with some musculoskeletal problems have a decrease in temperature when starting repetitive tasks and thermal asymmetries, which measurements were recorded at 0, 10, 15, and 20 min after the task was finished. Findings indicate that the temperatures in both wrists behave similarly. The workers reached higher temperatures, and the centigrade degrees of asymmetry difference were also higher. The variable with influence on the temperature was fractured in the arm. After thermally analyzing the temperature behavior between the wrists of both hands, it is concluded that there is an increase in temperature after finishing a repetitive task, and it does not stabilize after 20 min. Both thermography methods observed that the asymmetries are greater than 0.5 °C, detecting the possible pathology of carpal tunnel syndrome.

The anatomical structure of the foot can be assessed by examining the plantar footprint for orthopedic intervention. In fact, there is a relationship between a specific type of foot and multiple musculoskeletal disorders, which are among the main ailments affecting the lower extremities, where its accurate classification is essential for early diagnosis. This work aims to develop a method for accurately classifying the plantar footprint and hindfoot, specifically concerning the sagittal plane. A custom image dataset was created, comprising 603 RGB plantar images that were modified and augmented. Six state-of-the-art models have been trained and evaluated: swin_tiny_patch4_window7_224, convnextv2_tiny, deit3_base_patch16_224, xception41, inception-v4, and efficientnet_b0. Among them, the swin_tiny_patch4_window7_224 model achieved 98.013% accuracy, demonstrating its potential as a reliable and low-cost tool for clinical screening and diagnosis of foot-related conditions.

This study analyzes the relationship between ergonomic and psychosocial risk factors and labor productivity using a bibliometric approach through a general analysis and one that includes inclusion criteria such as English language, open access, and primary research publications to identify only those articles that explicitly address the relationship between ergonomic and psychosocial risk factors and labor productivity. It is recognized that both physical and psychosocial conditions of the work environment directly influence workers’ health and organizational performance. For this purpose, a bibliometric review was conducted in academic databases, including Scopus, Web of Science, ScienceDirect, and Taylor & Francis, resulting in the selection of 4794 relevant articles for general analysis. Additionally, 116 relevant articles were selected based on the inclusion criteria. Tools and methodologies, such as Rayyan, Excel, VOSviewer 1.6.20, and PRISMA, were used to classify the studies and identify trends, collaboration networks, and geographical distribution. The results reveal a sustained growth in scientific production, with clusters on occupational safety and health, work environment factors, and the characteristics of the population, approach, and methodologies used in the studies. Likewise, Procedia Manufacturing, International Journal of Occupational Safety and Ergonomics, and Ergonomics stand out as the main sources of publication, while countries such as Sweden, Poland, and the United States lead the scientific production in this field. In addition, the network of co-occurrence of keywords evidences a comprehensive approach that articulates physical or ergonomic and psychosocial risk factors with organizational performance, while the network of authors shows consolidated collaborations and studies focused on analyzing the relationship between physical demands and musculoskeletal disorders from advanced ergonomic approaches.

The psychometric properties of the Scale to measure the attitude of researchers for scientific-technological collaboration between universities and industry (EA-COOPTEC, for its acronym in Spanish) were analyzed, specifically evidence of construct validity of the internal structure and invariance for gender and age was obtained. The EA-COOPTEC was administered to 179 academic Teachers–Researchers (T-Rs) involved in Universities-Industry Collaboration (UIC) activities: 50 women and 129 men. Participants had a median age of 36–40 years. A descriptive analysis was implemented, as well as an Exploratory and Confirmatory Factor Analysis (EFA and CFA), and a method of succession of nested models for invariance testing. A four-factor model explaining the perception of UIC activities was generated and evidence of invariance for gender and partial invariance for age was obtained. Acceptable fit indices were obtained for the configurational, weak, strong and strict. Given the results, we recommend the use of the EA-COOPTEC v0.1 for the analysis of the mean differences between genders and age in T-Rs.

BACKGROUND: Musculoskeletal System Disorders (MSDs) are a group of injuries that represent common occupational diseases and should be evaluated for prevention purposes because an increase has been observed due to the repetitive movements performed in the industry. This research was carried out in a manufacturing industry where metal parts are manufactured, and workers experience back and wrist pain. OBJECTIVE: To prediagnose Musculoskeletal System Disorders (MSDs) and examine the relationship between temperature, demographic, and physiological factors in workers through predictive models, contributing to MSD prevention. METHODS: Information from 36 operators was used to obtain vital signs and somatometry data, and thermograms of their hands in the dorsal, palmar, and back areas were collected and analyzed to determine the relationship between temperature and demographic and physiological factors. RESULTS: The ergonomic evaluations proved that the operators were at high risk owing to repetitive movements and postures adopted during work. Eighty-six percent of cases with injuries were identified using infrared thermograms, proving their high level of effectiveness. When studying the relationship between temperature behavior during recovery from repetitive activities and demographic and physiological factors, it was determined that age, dominant hand, respiratory frequency, and BMI were the most significant. CONCLUSIONS: Nine regression models were obtained, with coefficients of determination between 0.17 and 0.71. The significant factors for worker injuries were age, dominant hand, respiratory rate, and BMI. However, the sample size and variability in work activities should be extended to generalize the findings.

The International Labour Organization (ILO) considers mental workload one of the most important psychosocial risk factors associated with the characteristics of the task and paramount in the metalworking industry. The objective was to analyze the levels of risk of the psychosocial factors that workers present, considering their physical, social, and mental environment, to respond to the Mexican Official Norm NOM-035-STPS and the ILO guidelines. The methodology consisted of applying to 125 workers a questionnaire of 74 items with 10 factors. The answers were assigned a score of 0 to 4 to later determine the risk level of each factor. The results revealed that the factors with the highest risk are working hours (93%), workload (71%), and lack of control over work (34%). It is concluded that the higher risk factors affect the mental workload of workers in the metalworking industry and associated with the characteristics of the tasks they perform.