Thermochemical multistep water- and CO2-splitting processes are promising options to face future energy problems. Particularly, the possible incorporation of solar power makes these processes sustainable and environmentally attractive since only water, CO2 and solar power are used; the concentrated solar energy is converted into storable and transportable fuels. One of the major barriers to technological success is the identification of suitable active materials like catalysts and redox materials exhibiting satisfactory durability, reactivity and efficiencies. Moreover, materials play an important role in the construction of key components and for the implementation in commercial solar plants. The most promising thermochemical water- and CO2-splitting processes are being described and discussed with respect to further development and future potential. The main materials-related challenges of those processes are being analyzed. Technical approaches and development progress in terms of solving them are addressed and assessed in this review.
2 April 2008 in Journal of the American Ceramic Society
Redox studies on dense zirconia-doped ceria pellets were carried out by thermogravimetric investigations and dilatometry. Up to 1600 K reduction parameters determined by both methods correspond to each other. At higher temperatures, however, thermogravimetry overestimates the degree of reduction since mass loss is not only due to oxygen exsolution but also to selective evaporation of CeO2 whose vapour pressure is considerably higher than that of ZrO2. As a consequence surface segregation of zirconia occurs in (Ce,Zr)O2−δ pellets leading to a porous surface zone of Ce2Zr2O7 pyrochlore which gradually grows in thickness. Surface enrichment of zirconia is detrimental for splitting CO2 or H2O since re-oxidation temperatures of (Ce,Zr)O2−δ are known to be shifted towards lower temperatures with increasing ZrO2 content. Thus, very harsh reduction conditions should be avoided for the (Ce,Zr)O2−δ redox system. The kinetics investigations comprised the high temperature reduction step (T ≅ 1600 K) and the “low” temperature oxidation reaction with a carbon dioxide atmosphere (T ≅ 1000 K). The reduction kinetics (at around 1600 K and an oxygen activity of 7 × 10−4 in the gas phase) directly yield the (reduction) equilibrium exchange rate of oxygen in the order of 10−7 mol·O/(cm3·s) as the kinetics are surface controlled. The oxidation step at around 1000 K, however, occurs in the mixed control or in the diffusion control regime, respectively. From oxygen isotope exchange in combination with SIMS depth profiling oxygen exchange coefficients, K, and oxygen diffusivities, D, were determined for so-called equilibrium experiments as well as for non-equilibrium measurements. From the obtained values for K and D the (oxidation) equilibrium exchange rates for differently doped ceria samples were determined. Their dependency on the oxygen activity and the nature and the concentrations of a tetravalent dopant (Zr) and trivalent dopants (La, Y, Sm) could be semi-quantitatively rationalised on the basis of a master equation for the equilibrium surface exchange rate.