Over the last decades, the constant growth of the world-wide industry has been leading to more and more concerns with its direct impact on greenhouse gas (GHG) emissions. Resulting from that, rising efforts have been dedicated to a global transition from an oil-based industry to cleaner biotechnological processes. A specific example refers to the production of bioethanol to substitute the traditional transportation fuels. Bioethanol has been produced for decades now, mainly from energy crops, but more recently, also from lignocellulosic materials. Aiming to improve process economics, the fermentation of very high gravity (VHG) mediums has for long received considerable attention. Nowadays, with the growth of multi-waste valorization frameworks, VHG fermentation could be crucial for bioeconomy development. However, numerous obstacles remain. This work initially presents the main aspects of a VHG process, giving then special emphasis to some of the most important factors that traditionally affect the fermentation organism, such as nutrients depletion, osmotic stress, and ethanol toxicity. Afterwards, some factors that could possibly enable critical improvements in the future on VHG technologies are discussed. Special attention was given to the potential of the development of new fermentation organisms, nutritionally complete culture media, but also on alternative process conditions and configurations.
7 March 2018 in Chemical Engineering Communications
This work studied the resistance of Saccharomyces cerevisiae Y904 to ethanol on an alcoholic fermentation process operated in fed-batch. The effect of temperature, inoculum size and substrate concentration on fermentation yield, productivity and residual sugars concentration was studied by a central composite design (CCD). Based on the CCD study, it was determined the optimum values of 240, 35 g/L, and 26°C for total reducing sugars, inoculum concentration and temperature, respectively. This set of conditions experimentally enabled a productivity of 6.0 g/L h, a yield of 93% and an alcohol content of 113.6 g/L, after 10 h of fermentation. When yeast cells were adapted at 4°C, the inoculum pH adjusted to 2.5 and sugarcane broth used as substrate, a 94% yield and a 10.1 g/L. h productivity were achieved.
This study evaluates the behavior of a distillation column with 10 perforated plates in obtaining wine distillate. The fermented liquid with 12 GL was obtained from a mixture of ethyl alcohol and water and fed into a column with 10 perforated plates operating at a reflux ratio of 4.. A study of the differential distillation performance was carried out. Therefore, the objective of this study was to evaluate the performance of a perforated plate distillation column in a pilot plant located at the Instituto Superior de Engenharia do Porto, in Portugal. The results showed that the distillate concentration, compared to differential distillation, is approximately three times higher when the same quantity of distillate is obtained; the intermediate data are valuable for supporting studies on wine distillation for obtaining distilled beverages