GEOFFREY OMOSA

Mr. GEOFFREY OMOSA

Meru University of Science and Technology
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
SNSolange Numfor
Solange Numfor
GOGEOFFREY OMOSA
GEOFFREY OMOSA
Zhengyang ZhangZhengyang Zhang
Zhengyang Zhang
KMKazuyo Matsubae
Kazuyo Matsubae
The importance of recycling end-of-life vehicles (ELVs) has been widely acknowledged as a means of reducing ELV waste to the environment. This reduced environmental waste contributes to achieving a number of UN SDGs, including the creation of sustainable cities. The recovery of secondary resources, such as metals, from the recycling of ELVs also reduces over-dependence on primary resources. This promotes efficient resource utilization and resource conservation. While recycling systems have been established and laws governing ELV recycling have been implemented in some developed countries, there are no such systems in much of the world, and regulations are few if any. To determine the challenges and opportunities for ELV recycling in developing countries, the literature on ELV recycling processes and activities was reviewed, and a SWOT analysis was done based on the data compiled from the literature, to identify the strengths, weaknesses, opportunities, and threats. From the SWOT analysis, the common features identified as opportunities were large market size, low labor cost, and the presence of recyclers of ELV parts. The common strengths were identified to be the vehicle registration system, vehicle manufacturing, ELV legislation, ELV recycling, and the waste management system. In the case of weaknesses, the identified features were the technological capacity, waste regulatory framework, vehicle deregistration, ELV regulatory framework, environmental impact and pollution, and the lack of access to information regarding ELVs, and ELV recycling infrastructure. The common threats were perceived as the little attention given to ELV recycling by the governing authorities, the difficulty of doing business, and political and social instability. The results of the SWOT analysis also showed that the opportunities were considerable and the threats were significant for all of the countries in this study. The weaknesses were significant in Nigeria and the other developing countries, and the strengths of the emerging economies tended to be greater. While weaknesses and threats were clearly identified by the SWOT analysis, the SWOT analysis also revealed the strengths and opportunities for recycling ELVs in developing and emerging countries.

23 January 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
GOGEOFFREY OMOSA
GEOFFREY OMOSA
SNSolange Ayuni Numfor
Solange Ayuni Numfor
MKMONIKA KOSACKA-OLEJNIK
MONIKA KOSACKA-OLEJNIK
The automotive industry is one of the largest consumers of natural resources, and End-of-Life Vehicles (ELVs) form bulky wastes when they reach the end of their useful life, hence environmental concerns. Efficiency in recycling ELVs is therefore becoming a major concern to address the number of ELVs collected and recycled to minimize environmental impacts. This paper seeks to describe several activities of a closed-loop reverse logistics supply chain for the collection and recycling of ELVs and to identify the related potential risks involved. This study further investigated the potential risks for managing the efficient recycling of ELVs by modeling and viewing the end-of-life vehicle (ELV) recycling system as a reverse logistics supply chain. ELV recycling steps and processes, including collection and transportation, as well as the laws and technologies, were analyzed for risk factor identification and analysis. The major aim of this research is to perform a unified hierarchical risk analysis to estimate the degree of risk preference to efficiently manage the ELV supply chain. This study also proposes a risk assessment procedure using fuzzy knowledge representation theory to support ELV risk analysis. As a result, the identified key risks were ranked in terms of their preference for occurrence in a reverse supply chain of ELV products and mapped into five risk zones, Very Low, Low, Medium-Low, Moderate, Serious, and Critical, for ease of visualization. Hence, with a step-by-step implementation of the presented solution, ELV recycling organizations will see benefits in terms of an improvement in their activities and thus reduced costs that may occur due to uncertainties in their overall ELV business.

3 May 2024 in Polymer Engineering & Science
Verified
Journal Article
Open access
PDF file
GOGEOFFREY OMOSA
GEOFFREY OMOSA
FMFredrick Madaraka Mwema
Fredrick Madaraka Mwema
EAEsther T. Akinlabi
Esther T. Akinlabi
TJT. C. Jen
T. C. Jen
JMJ. M. Mutua
J. M. Mutua
In the present study, the selection of suitable shape memory polymers (SMPs) to be used as the matrix‐phase material with various (In)organic filler materials to achieve the required optimum multi‐stimuli response in shape memory polymer composites (SMPC) systems is analyzed. The selection of these materials is based on their mechanical and physical properties as well as other underlying factors such as cost, availability, shape recovery rate, and aesthetic characteristics. In this study, the entropy method was applied to estimate the weightages of the various criteria while the gray relation analysis (GRA) and the technique for order preference by similarity to ideal solution (TOPSIS). Multi‐criteria decision‐making (MCDM) approaches have been used to rank the suitable matrix‐phase polymer materials for manufacturing shape memory polymer composites (SMPC) system. A total of eight alternative SMP matrix‐phase materials based on a set of nine criteria were analyzed and ranked. The proposed methodology and the result obtained thereof have been illustrated in detail. The results obtained from TOPSIS and GRA methods have been compared to conclude the effects of the material properties on the ranking and the selection of the SMP materials. Among all the eight alternatives considered, thermoplastic polyurethane (TPU) was found to be the best material in both the MCDM methods. The material cost, resistivity, % elongation, and hydrophobicity present the most influencing properties on the SMP material selection, whereas density presents no effect on the SMP matrix material selection. The robustness of the results for the comparative analysis was verified using TOPSIS methodology to validate its reliability. It was revealed that the TPU, polycarbonate, polypropylene, and epoxy‐resin/poly(lactic acid) are the most dominant matrix‐phase SMP material alternatives when a deviation in the entropy weights of the primary evaluation criteria is applied. The novelty of this study is the exploration and application of statistical MCDM methods of engineering material selection problems based on a set of decision criteria, which can be time‐consuming and costly while using experimental analysis methods.Highlights: SMPCs are applicable engineering materials thus making their research viable. SMPC systems can undergo various shape changes under external stimuli. Selection of matrix‐phase polymer is critical in achieving desired objectives. GRA and TOPSIS MCDM approaches have been applied in the selection process. TPU was found as the best material in both methods.