A prototype anthropomorphic head and neck phantom has been designed to simulate the adult head and neck anatomy including some internal organs and tissues of interest, such as thyroid gland and sentinel lymph nodes (SLNs). The design of the head and neck phantom includes an inner jig holding the simulated SLNs and thyroid gland. The thyroid gland structure was manufactured using three-dimensional (3D) printing taking into consideration the morphology and shape of a healthy adult thyroid gland. The head and neck phantom was employed to simulate a situation where there are four SLNs distributed at two different vertical levels and at two depths within the neck. Contrast to noise ratio (CNR) calculations were performed for the detected SLNs at an 80 mm distance between both pinhole collimators (0.5 and 1.0 mm diameters) and the surface of the head and neck phantom with a 100 s acquisition time. The recorded CNR values for the simulated SLNs are higher when the hybrid gamma camera (HGC) was fitted with the 1.0 mm diameter pinhole collimator. For instance, the recorded CNR values for the superficially simulated SLN (15 mm depth) containing 0.1 MBq of 99mTc using 0.5 and 1.0 mm diameter pinhole collimators are 6.48 and 16.42, respectively (~87% difference). Gamma and hybrid optical images were acquired using the HGC for the simulated thyroid gland. The count profiles through the middle of the simulated thyroid gland images provided by both pinhole collimators were obtained. The HGC could clearly differentiate the individual peaks of both thyroid lobes in the gamma image produced by the 0.5-mm pinhole collimator. In contrast, the recorded count profile for the acquired image using the 1.0-mm-diameter pinhole collimator showed broader peaks for both lobes, reflecting the degradation of the spatial resolution with increasing the diameter of the pinhole collimator. This anthropomorphic head and neck phantom provides a valuable tool for assessing the imaging ability of gamma cameras used for imaging the head and neck region. The standardisation of test phantoms for SFOV gamma systems will provide an opportunity to collect data across various medical centres. The phantom described is cost effective, reproducible, flexible and anatomically representative.
Objective: To examine the imaging capability of a novel small field of view hybrid gamma camera (HGC) using 125I seeds prior to surgical use. Methods: The imaging performance of the camera system w...
Since late 2019, Coronavirus Disease 2019 (COVID-19) has spread all over the world. The disease is highly contagious, and it may lead to acute respiratory distress (ARD). Medical imaging can play an important role in classifying, detecting, and measuring the severity of the virus. This study aims to provide a novel auto-detection tool that can detect abnormal changes in conventional X-ray images for confirmed COVID-19 cases. X-ray images from patients diagnosed with COVID-19 were converted into 19 different colored layers. Each layer represented objects with similar contrast that could be defined as a specific color. The objects with similar contrasts were formed in a single layer. All the objects from all the layers were extracted as a single-color image. Based on the differentiation of colors, the prototype model was able to recognize a wide spectrum of abnormal changes in the image texture. This was true even if there was minimal variation of the contrast values of the detected uncleared abnormalities. The results indicate that the proposed novel method can detect and determine the degree of lung infection from COVID-19 with an accuracy of 91%, compared to the opinions of three experienced radiologists. The method can also efficiently determine the sites of infection and the severity of the disease by classifying the X-rays into five levels of severity. Thus, the proposed COVID-19 autodetection method can identify locations and indicate the degree of severity of the disease by comparing affected tissue with healthy tissue, and it can predict where the disease may spread.