As both the bit rate required by applications on mobile devices and the number of those mobile devices are steadily growing, wireless access networks need to be expanded. As wireless networks also consume a lot of energy, it is important to develop energy‐efficient wireless access networks in the near future. In this study, a capacity‐based deployment tool for the design of energy‐efficient wireless access networks is proposed. Capacity‐based means that the network responds to the instantaneous bit rate requirements of the users active in the selected area. To the best of our knowledge, such a deployment tool for energy‐efficient wireless access networks has never been presented before. This deployment tool is applied to a realistic case in Ghent, Belgium, to investigate three main functionalities incorporated in LTE‐Advanced: carrier aggregation, heterogeneous deployments, and Multiple‐Input Multiple‐Output (MIMO). The results show that it is recommended to introduce femtocell base stations, supporting both MIMO and carrier aggregation, into the network (heterogeneous deployment) to reduce the network's power consumption. For the selected area and the assumptions made, this results in a power consumption reduction up to 70%. Introducing femtocell base stations without MIMO and carrier aggregation can already result in a significant power consumption reduction of 38%.
In this study, a power consumption model as a function of the traffic is developed for macrocell base stations based on measurements on an actual base station. This model allows us to develop energy-efficient wireless access networks by combining the Green radio access network design (GRAND) tool designed by the authors, which develops an always-on network with a minimal power consumption for a predefined area, and an algorithm that introduces power reducing techniques in the network such as sleep modes and cell zooming. Green-field deployments and optimization of existing networks are investigated. For a green-field deployment, it was found that introducing sleep modes and cell zooming in the network can reduce the power consumption by up to 14.4% compared to the network without sleep modes and cell zooming. Optimizing existing networks by applying GRAND (without sleep modes and cell zooming) results in a power consumption reduction of 34.5% compared to the original network. A careful selection of base station locations already results in a significant energy saving. Introducing sleep modes and cell zooming to the current networks results in a saving of 8%. Sleep modes and cell zooming are promising energy-saving techniques for future wireless networks.
28 August 2012 in Transactions on Emerging Telecommunications Technologies